These are two very good MP's. To me the TW sounds very clear and bright with good projection. I picked it during the blind test. To me the Phil sounds more rich/mellow and very soft. Thanks for putting on this type of review.
During A B test B sounded a bit strange, warped Reed or not warmed up? In the longer clips I much prefer the tribute. The Gaia doesn't seem to like being pushed as much.
I voted for "A". When you played the "unmasked" comparison, I preferred the Phil-Tone. I would like to see a comparison of alto mouthpieces: Otto Link HR, Otto-Link Tone Master, Meyer, Vandoren V16 & Vandoren Jumbo-Jazz.
This was probably the best insight into your embouchure; better than the actual embouchure video! Kudos for reinforcing that out of reach priced mouthpieces are not necessary for most. It would be great to see you do a comparison of the usual lower priced tenor mouthpieces which most of us will probably use. I recently started playing [tenor] and picked up a Yamaha 5C as a starter piece but was not so happy. It was a bit harder blow for me. Since I love Gene Ammons and his soulful sound I picked up a Brilhart Ebolin 4 for around 45 bucks and I am loving it! With a 2.25 Legere it has made my life and learning curve way easier. That sort of comparison video would tremendously helpful to newbies like me!
Both mouthpieces sound great. The Phil-Tone sounded full and warm in the core more like a really great vintage mouthpiece. The Theo Wanne GAIA 3 sounded brighter, clearer and more open. I also liked your creative improvisation on it. It seems to get a sound closer to the darker Tribute, the Theo Wanne AMBIKA might suit better.
I finally pulled the trigger on a metal Yanagisawa 7 and have been living it. Don't know what to compare it to but tried a bunch and feel in love with it.
I would love to hear a "blind" test of mouthpieces with differently sized tip openings, and then to better understand how the tip openings change/affect the sound. Also, thank you, Jay, for this channel. I stopped playing sax as other musical interests took over while in college, and have been wanting to start playing again for quite a while. I've been subscribed and watching videos for almost a year now, and I'm about to take the plunge to start playing again. This channel has been a great motivation to that end, and simply want to extend my sincere thanks for that motivation. Cheers!
Good to hear you’re feeling inspired. As far as tip openings go, it wouldn’t make much sense to do that since I wouldn’t be as comfortable on the other tip openings. For me it is a question of comfort with the reed and air. It’s true that there would be a difference in sound though.
Man,am I glad to see The Tribute getting some love.I've got one,I'm happy with it,it makes me work but it also rewards me for the work done.I just love the fact that it is not too easy to blow.For me it's a great balance between ease and resistance.
I purchased a Tribute last year and I absolutely love it. I use rigotti gold 3-mediim reeds and have able to get pretty close to the Coltrane/Gordon range of sounds. I really love the mouthpiece, and I definitely have confidence in it.
The difference between the two was less in the sound and more in how controlled the lower register was. With the Philtone, whenever you went below a certain pitch, you (seemingly unintentionally?) achieved a sort of sforzando. WIth the Wanne, the dynamics seemed more deliberate and controlled.
Great video ...guess it comes down to what look a person likes...I like the Theo maybe because of the built in multi purpose ligature...Going to be awhile before I deserve that good of a mouthpiece ..
I just felt one wasn't better than the other B gave a more diverse sound with some harsh tones but also the softer passages were more smooth that A. and A gave a kinda lower volume smoother sound overall. In the longer passage I personally liked the Phil tone because of the smooth quality it gave to this piece of music I believe this was the A mouth piece and B was the Gaia. my guess.
The Tribute had a slightly more spread tone to my ears, and the Gaia 3 was a little more brilliant as others pointed out. My tenor mouthpiece is a Phil Tone Mosaic 7* LTD and has a big/spread sound and plenty of projection, and I got it plated by Matt Marantz instead of sticking to the bare brass. I have a 1st-gen Theo Wanne Durga 8 that I play on bari.
Hey Karl. Do you have any clips of you on your Mosaic? I've been so curious as what it sounds like compared to the Tribute. But the only clip I can find is from their website
Just my two cents as I play a Gaia 3 9 and have tried a Durga 7, 8, 9 and Shiva 7 and 8. The Durga is considerably brighter, where the Gaia has its strength in the mids, the Durga has it in the highs. It thins the bottom out a little much for my preference, but if you like the little saucy buzz that Texas Tenor players get (Think Wilton Felder of the Crusaders) then its a nice sound for that. It takes a lot of air, all the pieces, to get the full tonal characteristic, but they will respond easily at any volume. The Shiva wrecked my low end sound, getting very quacky below a mid G. This being said, I have a friend who plays a Shiva for R&B and has the most incredible sound I've ever heard. Bright, but exceptionally complex. The Shiva was the first TW piece I tried, and its that complexity that prompted me to try the other models out. If you live on the East coast near D.C. Chuck Levin's often has many pieces to try.
And the Slant Sig for tenor sax? From Theo Wanne... did you tried it? And I wish to know why you use a number 3H or 4S reed. Do you have more projection with these strong reeds? Je voudrais savoir votre opinion sur la Slant Sig Theo Wanne. Et j’etait ettonée a cause de la dureté des reeds que vouz avez choisi. J’irais aimer si vous parlez de ça. Merci!
I recently purchased a used tenor sax with a "like new" vintage A Gigliotti 7G* tenor mouth piece. What would it be worth and as an intermediate player, should I be using it?
D'Addario Select Jazz vs JodyJazz HR vs Vandoren V16 for alto. Or... the basic Meyer HR vs Otto Link HR for alto. Or... Meyer metal vs Otto Link metal for alto. (Being as most of us aren't professional saxophonists, spending over $200 for a mouthpiece is kinda crazy. And when you' do spend 300-500 bucks on a mouthpiece, you expect that it'll sound great.)
HI BETTERSAX I PERFER A MOUTH PIECES IT HAS MORE DARKER SOUND IN THE LOWER REGISTER WHICH MOUTH PIECES WAS A???? I WAIT FOR YOUR ANSWER THANKS FOR THIS VIDEO ALL THE BEST
Maybe I've missed it, but I'd love to learn how the different apertures effect the sound of the mouthpiece. I am still playing on my beginner Selmer C star mouthpiece, and it sounds pretty good in a classical setting, but I want to have a little more growl and darker tones for a jazz setting.
The Phil has a warm, 'tubbier' sound, it does also sound like there is not as much mid on that piece. It's tonal characteristic sits very much in the highs, which is why I imagine some folks are saying its sounds more bright, but you can't ignore how the lows are coming out either and the breathiness it adds. The TW sounds more focused and forward, even in low mid and high, with a punchier presence. To me it sounds fuller, not to be confused with fatter, than the Phil. I would also say the sound seems more flexible than the Phil. I do personally play a TW Gaia 3 9, and I selected it for the feel more than anything. If you haven't played a TW, keep in mind this is a LOUD mouthpiece. Keep an eye out for these pieces for much lower, a lot of Sam Ashe used to carry them and are off loading their display models for a lot less than retail.
Hello, new subscriber. I’m a Theo Wanne endorsing artist. I play an original Durga (9) Vintified. The Gia sounds great. Of course I’m partial to the Theo Wanne.
I just picked up the 100th anniversary Otto Link Tenor 8* and I have been playing on a Berg Larsen 130/0M for years...I really dig the Otto Link..Its super responsive and the sound is smooth with edge. Recommend you try it out if you haven't already !
For my taste...mouthpiece A..Why..? The sound of the "A" is more consistent, softer than the "B" ..I like the OL Florida sound...so I think the "A" Mp is nearest of the OL tan the "B". The "B" for my tase is too bright...Thank you for your videos they are very interestings. What do you think about having differents MP to play with differents styles and combos..? Gracias.
Thanks for your very good video! I preffer the A to play softly or warmer as soloist. But the B is brigther or sharper, and may be better for play in a band. Congrats, and.. Saludos de Argentina.
For mouthpiece battles: JodyJazz DV vs Theo Wanne Durga on alto and tenor. JodyJazz HR* vs modern Meyer and Otto Link HR on alto. JodyJazz SuperJet vs Theo Wanne Mindi Abair on alto. Selmer S80 C* vs Selmer S90 C* and JodyJazz HR* C* on alto. I am interested in the last one I have never seen any reviews or found any audio from someone playing the JodyJazz HR* in the C* tip only the more commonly used 6M, 7M, 8M tips on alto (I have the 6M) and I have always wondered what the C* sounds like.
The wanne piece likes you a little more then the other one. Phil tone is warmer, the wanne is definitely something I could see you perform with. Nice job Jay!
Hey I've been playing the alto sax for three years now and need a new mouthpiece to go with my new sax, could you do a battle between two both affordable but quality mouthpeices?
Lawton v.s Guardala/Nadir tenor mouthpiece battle - I would love to see what you consider the best of the ‘bright’ pieces Jay. Also, another one could be between either an MB1 or MB2 against Retro Revival’s Seventh Avenue South mouthpiece - which of the Michael Brecker-esque pieces is best!
It's so hard to choose which one I like more. A is nice darker sound to it (which I really like), but B has a nice edgy sound to it (which I also really like). Probably B.
Generally I think the Theo Wanne was at a disadvantage in terms of the reed. The piece sounded like it was struggle when e you tried to push. Maybe use A Rigotti Gold reed or Woodstone reed. The Philtone is excellent!! 🙏🏿
I liked the advice about not trying these high-end mouthpieces if they're beyond your budget, because you risk finding your most beloved mouthpiece suddenly deficient by comparison. I liked the advice, and then ignored it. I saw a used metal Gaia (first version), put in an offer that didn't seem unreasonable, and found myself buying it for about half the cost of a new Gaia 3. I don't remotely play well enough to be spending that kind of money, but in all honesty I have to report that it was worth it. In fact I'm stunned. It's a 7*, which I feared would be too open to get a decent sound out of, my skill being what it is. But in fact I've never tried a mouthpiece easier to play. The difference between it and the 7* Jody Jazz HR* I'd previously splurged on was nothing less than astonishing--and that's just in terms of playability. The tone is the best and easiest noise I've ever made with a sax, and it was there immediately. Now I can only hope I can just stick with it for 20 years, and not find myself too curious about other options. But disappointment educates us better than success (no?), so I'll probably do something like this again. Thanks, Jay. I'm blaming you.
Jay -- have you seen / heard of the Syos 3D printed mouthpiece brand based out of Paris? I'd love to hear your thoughts on the process, material, and overall quality. There are lots of great mouthpieces out there, but the idea of an affordable custom made piece is intriguing. I admit I'm torn between the innovation of 3d printed acoustic science vs traditionally handcrafted / finished mouthpieces.
Hey Jay. Love the vids. Thanks for posting. How about doing a comparison of Theo Wanne Ambika and a Retro Revival Crescent and maybe an Otto link New Vintage series. And which mouthpiece is A and which one is B? Did I miss something?? Thanks again.
Does it make sense to compare mouth pieces like this? It's all about whether it fits you or not. How the very same mouthpiece is working for different persons is depending on what kind of music you are playing, what reed you are using, how your mouth and teeths are "designed", how you are blowing, your ambosure, your mood, your perception of the brand, the price etc etc.
Jay - you've got these mouth-tip comparisons down to a tee with regards separating the actual sound from any other aspects: although I love the aesthetic of the Theo Wanne, the honesty of the blind listening led me to the Phil Tone. I guess I'm more of a bluesy / soulful / dark sax player. Out of curiousity, have you tried this in the 9.0 tip? And I'd be keen to hear that compared to the Theo Wanne Ambika 2 7.0 and 8.0 tips (which both seem to be quite dynamic and flexible with regards options to play dark and jazz it up a bit). Your thoughts?
I want to see a Rico Metalite or Graftonite vs a more expensive mouthpiece. Maybe a Brillhart since he designed these Rico pieces? I use a Graftonite on tenor & a Metalite on bari right now. It's funny because I use Legere reeds which are more expensive than the mouthpiece! 😂
The Tribute has more mids in the tone while the Theo Wanne has more highs. It sounded like you needed a harder reed in the Theo Wanne, and you mentioned it likes a harder reed. I think the Tribute was destined to be better because of the hand finishing. I have played the older model Tribute and the Gaia 2 and thought neither were as good as my vintage Florida Otto Link that was straight from the factory with no modification.
B was "brighter" to me than A...A was a bit more laid back...I preferred B overall but can see that A might me preferred if you did want to be a bit less aggressive.
If you were let to chose only ONE mouthpiece for your tenor for an all around use, which one would it be: DV CHI 7*? DV NY 7*? GAIA 3 ? AMBIKA 3? Cheers!
First of all: Thanks for the video ! Very nice video! But a suggestion: since you change the reed AND the ligature, its not a "fair" test. Once again, thanks for the video!
I just got a second-hand GAIA3 7*. Best metal piece on the market IMO. The Tribute is also very nice sounding but it lacks power if you intend to play Jazz AND pop or Funk. I am really impressed by the GAIA3 which has more power than the first generation,
Hi Jeff, you have an excellent sound and that is inspiring !. I would like you to test the D'Addario Graftonite mouthpieces for alto and compare them with more expensive mouthpieces to see price/value relationship. By the way, what exercises have you been playing on the first part ?
Own a Tribute. Super satisfied with it. Own a 2nd piece that's more of a screamer, for loud situations when the monitors might not be adequate or non-existent.
Jay, Do you have a video where you talk a bit about the differences between hard rubber and metal mouthpieces? I have a couple hard rubber and one metal mouthpiece. They feel really different but I can't put my finger on what the strengths of each are.
MY wife has budgeted some money after our instruments get repaired. It is looking like I can get a mouthpiece like this. Is it worth it to get a great, and expensive mouthpiece, to play on a beginner saxophone and then upgrade the sax later?
Definitely worth upgrading your mouthpiece but you probably shouldn’t go all the way to this level. Something more intermediate and less expensive for the first step.
@@bettersax Thank you very much. The guy at the store also showed the the Selmer Paris S80 Series Alto Saxophone Mouthpiece C*. Would that be good range or still to much?
Next battle:
New York Meyer 100 year anniversary JJ Babbit for alto sax VS. Theo Wanne NY bros 2 for alto sax
That is almost exactly the next one...
@@bettersax yaaaaaaaaaaas
Could you please do more baritone sax videos!
As always, you are extremely honest and ethical, Jay. Thank you so much. It's a privilege to meet you.
These are two very good MP's. To me the TW sounds very clear and bright with good projection. I picked it during the blind test. To me the Phil sounds more rich/mellow and very soft. Thanks for putting on this type of review.
During A B test B sounded a bit strange, warped Reed or not warmed up? In the longer clips I much prefer the tribute. The Gaia doesn't seem to like being pushed as much.
I voted for "A". When you played the "unmasked" comparison, I preferred the Phil-Tone. I would like to see a comparison of alto mouthpieces: Otto Link HR, Otto-Link Tone Master, Meyer, Vandoren V16 & Vandoren Jumbo-Jazz.
This was probably the best insight into your embouchure; better than the actual embouchure video! Kudos for reinforcing that out of reach priced mouthpieces are not necessary for most. It would be great to see you do a comparison of the usual lower priced tenor mouthpieces which most of us will probably use. I recently started playing [tenor] and picked up a Yamaha 5C as a starter piece but was not so happy. It was a bit harder blow for me. Since I love Gene Ammons and his soulful sound I picked up a Brilhart Ebolin 4 for around 45 bucks and I am loving it! With a 2.25 Legere it has made my life and learning curve way easier. That sort of comparison video would tremendously helpful to newbies like me!
Both mouthpieces sound great. The Phil-Tone sounded full and warm in the core more like a really great vintage mouthpiece. The Theo Wanne GAIA 3 sounded brighter, clearer and more open. I also liked your creative improvisation on it. It seems to get a sound closer to the darker Tribute, the Theo Wanne AMBIKA might suit better.
Berh ur profile is literally Theo wanne lol
I finally pulled the trigger on a metal Yanagisawa 7 and have been living it. Don't know what to compare it to but tried a bunch and feel in love with it.
I would love to hear a "blind" test of mouthpieces with differently sized tip openings, and then to better understand how the tip openings change/affect the sound.
Also, thank you, Jay, for this channel. I stopped playing sax as other musical interests took over while in college, and have been wanting to start playing again for quite a while. I've been subscribed and watching videos for almost a year now, and I'm about to take the plunge to start playing again. This channel has been a great motivation to that end, and simply want to extend my sincere thanks for that motivation. Cheers!
Good to hear you’re feeling inspired. As far as tip openings go, it wouldn’t make much sense to do that since I wouldn’t be as comfortable on the other tip openings. For me it is a question of comfort with the reed and air. It’s true that there would be a difference in sound though.
Man,am I glad to see The Tribute getting some love.I've got one,I'm happy with it,it makes me work but it also rewards me for the work done.I just love the fact that it is not too easy to blow.For me it's a great balance between ease and resistance.
I purchased a Tribute last year and I absolutely love it. I use rigotti gold 3-mediim reeds and have able to get pretty close to the Coltrane/Gordon range of sounds. I really love the mouthpiece, and I definitely have confidence in it.
I liked A more, it seems more easy blowing, and it plays in all dynamics and pitches really nicely
G’day Jay, really appreciate your honesty and objectivity, really helpful in deciding what we might be looking at upgrading to. Thanks a lot mate
I love the new series and you sound great!
The difference between the two was less in the sound and more in how controlled the lower register was. With the Philtone, whenever you went below a certain pitch, you (seemingly unintentionally?) achieved a sort of sforzando. WIth the Wanne, the dynamics seemed more deliberate and controlled.
I have the same theTheo Wanne and is grate. Beautiful sound.
Powerful piece with a warm sound.
You should try the Jodyjazz DV CHI on tenor
I just ordered a sax - I will be following these instructions on your site and this channel
Amazon tenor sax video? Where is it 😭
A. When I could see them, I preferred the Tribute. For me, the Tribute had more of the tonal attributes that I like in a tenor sound.
That's the tribute...
At first I liked A but also B ... almost hard to tell the difference, they both sound great !
As others said, you sound great on both, but I prefer the Theo Wanne, a little brighter.
Great video ...guess it comes down to what look a person likes...I like the Theo maybe because of the built in multi purpose ligature...Going to be awhile before I deserve that good of a mouthpiece ..
Vandoren V16 versus D'addario Jazz Select... I find the two very similar but interestingly different. Cheers!
I just felt one wasn't better than the other B gave a more diverse sound with some harsh tones but also the softer passages were more smooth that A. and A gave a kinda lower volume smoother sound overall. In the longer passage I personally liked the Phil tone because of the smooth quality it gave to this piece of music I believe this was the A mouth piece and B was the Gaia. my guess.
The Tribute had a slightly more spread tone to my ears, and the Gaia 3 was a little more brilliant as others pointed out. My tenor mouthpiece is a Phil Tone Mosaic 7* LTD and has a big/spread sound and plenty of projection, and I got it plated by Matt Marantz instead of sticking to the bare brass. I have a 1st-gen Theo Wanne Durga 8 that I play on bari.
Hey Karl. Do you have any clips of you on your Mosaic? I've been so curious as what it sounds like compared to the Tribute. But the only clip I can find is from their website
Blind test ) A
What's the difference between a Plastic and Metal mouthpiece and their advantages/disadvantages?
I prefere the first one, and I would like you to compare the durga mouthpiece and your first one.
Just my two cents as I play a Gaia 3 9 and have tried a Durga 7, 8, 9 and Shiva 7 and 8. The Durga is considerably brighter, where the Gaia has its strength in the mids, the Durga has it in the highs. It thins the bottom out a little much for my preference, but if you like the little saucy buzz that Texas Tenor players get (Think Wilton Felder of the Crusaders) then its a nice sound for that. It takes a lot of air, all the pieces, to get the full tonal characteristic, but they will respond easily at any volume. The Shiva wrecked my low end sound, getting very quacky below a mid G. This being said, I have a friend who plays a Shiva for R&B and has the most incredible sound I've ever heard. Bright, but exceptionally complex. The Shiva was the first TW piece I tried, and its that complexity that prompted me to try the other models out. If you live on the East coast near D.C. Chuck Levin's often has many pieces to try.
And the Slant Sig for tenor sax? From Theo Wanne... did you tried it? And I wish to know why you use a number 3H or 4S reed. Do you have more projection with these strong reeds?
Je voudrais savoir votre opinion sur la Slant Sig Theo Wanne. Et j’etait ettonée a cause de la dureté des reeds que vouz avez choisi. J’irais aimer si vous parlez de ça. Merci!
Morgan Excalibur vs Meyer vs Jody Jazz HR (Alto)
I recently purchased a used tenor sax with a "like new" vintage A Gigliotti 7G* tenor mouth piece. What would it be worth and as an intermediate player, should I be using it?
Retro Revival 7th avenue vs Modern Nadir Guardala MB2
For solo playing ( with playalongs ) I prefer the TRIBUTE. If I am going to play in a band i would select the Gaia3
Metal Theo Wayne vs metal Jody jazz
Matthew Stevenson - Definitely! JodyJazz Super Jet vs. Theo Wanne Shiva - same tip opening on both and let ‘em rip! 😊
D'Addario Select Jazz vs JodyJazz HR vs Vandoren V16 for alto. Or... the basic Meyer HR vs Otto Link HR for alto. Or... Meyer metal vs Otto Link metal for alto. (Being as most of us aren't professional saxophonists, spending over $200 for a mouthpiece is kinda crazy. And when you' do spend 300-500 bucks on a mouthpiece, you expect that it'll sound great.)
HI BETTERSAX I PERFER A MOUTH PIECES IT HAS MORE DARKER SOUND IN THE LOWER REGISTER WHICH MOUTH PIECES WAS A???? I WAIT FOR YOUR ANSWER THANKS FOR THIS VIDEO ALL THE BEST
Phil Tone Tribute sounds warmer and rich in my opinion. Great and honest comparision
I'd like you to compare the Theo Wanne Ambika 2 with a comparable mouthpiece.
Next mouthpiece battle:
Yamaha 4c vs Dave Guardala MBII
🤣
One year ago I could not cope with Theo Wanne Gaia 6*, and only these days I won it and can produce stable and nice sound
:)
Maybe I've missed it, but I'd love to learn how the different apertures effect the sound of the mouthpiece. I am still playing on my beginner Selmer C star mouthpiece, and it sounds pretty good in a classical setting, but I want to have a little more growl and darker tones for a jazz setting.
A is my choice. More subtle and velvety
Please do some alto sax mouthpieces!!!
The Phil has a warm, 'tubbier' sound, it does also sound like there is not as much mid on that piece. It's tonal characteristic sits very much in the highs, which is why I imagine some folks are saying its sounds more bright, but you can't ignore how the lows are coming out either and the breathiness it adds. The TW sounds more focused and forward, even in low mid and high, with a punchier presence. To me it sounds fuller, not to be confused with fatter, than the Phil. I would also say the sound seems more flexible than the Phil. I do personally play a TW Gaia 3 9, and I selected it for the feel more than anything. If you haven't played a TW, keep in mind this is a LOUD mouthpiece. Keep an eye out for these pieces for much lower, a lot of Sam Ashe used to carry them and are off loading their display models for a lot less than retail.
Hello, new subscriber. I’m a Theo Wanne endorsing artist. I play an original Durga (9) Vintified. The Gia sounds great.
Of course I’m partial to the Theo Wanne.
Thanks for the feedback...
I just picked up the 100th anniversary Otto Link Tenor 8* and I have been playing on a Berg Larsen 130/0M for years...I really dig the Otto Link..Its super responsive and the sound is smooth with edge. Recommend you try it out if you haven't already !
For my taste...mouthpiece A..Why..? The sound of the "A" is more consistent, softer than the "B" ..I like the OL Florida sound...so I think the "A" Mp is nearest of the OL tan the "B". The "B" for my tase is too bright...Thank you for your videos they are very interestings. What do you think about having differents MP to play with differents styles and combos..? Gracias.
Thanks for such an honest review. Great mouthpieces! Maybe in a few years when I get better! :D
Thanks for your very good video!
I preffer the A to play softly or warmer as soloist. But the B is brigther or sharper, and may be better for play in a band.
Congrats, and.. Saludos de Argentina.
For mouthpiece battles: JodyJazz DV vs Theo Wanne Durga on alto and tenor. JodyJazz HR* vs modern Meyer and Otto Link HR on alto. JodyJazz SuperJet vs Theo Wanne Mindi Abair on alto. Selmer S80 C* vs Selmer S90 C* and JodyJazz HR* C* on alto. I am interested in the last one I have never seen any reviews or found any audio from someone playing the JodyJazz HR* in the C* tip only the more commonly used 6M, 7M, 8M tips on alto (I have the 6M) and I have always wondered what the C* sounds like.
phil-tone tribute ...what a finish tone...!!!
It’s lovely to play.
The wanne piece likes you a little more then the other one. Phil tone is warmer, the wanne is definitely something I could see you perform with. Nice job Jay!
I love the Theo Wanne tenor mouthpiece. Great sound and projection. Cheers.
Hey I've been playing the alto sax for three years now and need a new mouthpiece to go with my new sax, could you do a battle between two both affordable but quality mouthpeices?
Do you recommend D'Addario Select Jazz 4-Soft Unfiled or filed?
Next battle...Morgan Fry "Vintage Slant" vs Ted Klum Florida or Ebonite...
Lawton v.s Guardala/Nadir tenor mouthpiece battle - I would love to see what you consider the best of the ‘bright’ pieces Jay. Also, another one could be between either an MB1 or MB2 against Retro Revival’s Seventh Avenue South mouthpiece - which of the Michael Brecker-esque pieces is best!
Hi! I would really love an Ambika vs Gaia battle :)
Coming soon actually
Jay, you don’t have to look so shell-shocked whilst playing your tenor with each mouthpiece. You look so scarred...Loved the vid! Keep it up!
It's so hard to choose which one I like more. A is nice darker sound to it (which I really like), but B has a nice edgy sound to it (which I also really like). Probably B.
Generally I think the Theo Wanne was at a disadvantage in terms of the reed. The piece sounded like it was struggle when e you tried to push. Maybe use A Rigotti Gold reed or Woodstone reed. The Philtone is excellent!! 🙏🏿
Nice shirt Jay :D
Philtone was the clear winner for me - closer to the kind of sound I prefer - but you sounded just like you on both of them.
Next battle Vandoren Java vs jumbo Java
I liked the advice about not trying these high-end mouthpieces if they're beyond your budget, because you risk finding your most beloved mouthpiece suddenly deficient by comparison. I liked the advice, and then ignored it. I saw a used metal Gaia (first version), put in an offer that didn't seem unreasonable, and found myself buying it for about half the cost of a new Gaia 3. I don't remotely play well enough to be spending that kind of money, but in all honesty I have to report that it was worth it. In fact I'm stunned. It's a 7*, which I feared would be too open to get a decent sound out of, my skill being what it is. But in fact I've never tried a mouthpiece easier to play. The difference between it and the 7* Jody Jazz HR* I'd previously splurged on was nothing less than astonishing--and that's just in terms of playability. The tone is the best and easiest noise I've ever made with a sax, and it was there immediately. Now I can only hope I can just stick with it for 20 years, and not find myself too curious about other options. But disappointment educates us better than success (no?), so I'll probably do something like this again. Thanks, Jay. I'm blaming you.
Jay -- have you seen / heard of the Syos 3D printed mouthpiece brand based out of Paris? I'd love to hear your thoughts on the process, material, and overall quality. There are lots of great mouthpieces out there, but the idea of an affordable custom made piece is intriguing. I admit I'm torn between the innovation of 3d printed acoustic science vs traditionally handcrafted / finished mouthpieces.
Hey Jay. Love the vids. Thanks for posting. How about doing a comparison of Theo Wanne Ambika and a Retro Revival Crescent and maybe an Otto link New Vintage series. And which mouthpiece is A and which one is B? Did I miss something?? Thanks again.
the new Babbitt Pieces are up next. A was Phil-Tone. I forgot to write it in the description oops.
I'd really like you to compare Theo Wanne Durga 3 tenor VS. Jody Jazz SuperJet tenor, had a really hard time to decide which one to buy. Thanks!
Does it make sense to compare mouth pieces like this? It's all about whether it fits you or not. How the very same mouthpiece is working for different persons is depending on what kind of music you are playing, what reed you are using, how your mouth and teeths are "designed", how you are blowing, your ambosure, your mood, your perception of the brand, the price etc etc.
Jay - you've got these mouth-tip comparisons down to a tee with regards separating the actual sound from any other aspects: although I love the aesthetic of the Theo Wanne, the honesty of the blind listening led me to the Phil Tone. I guess I'm more of a bluesy / soulful / dark sax player. Out of curiousity, have you tried this in the 9.0 tip? And I'd be keen to hear that compared to the Theo Wanne Ambika 2 7.0 and 8.0 tips (which both seem to be quite dynamic and flexible with regards options to play dark and jazz it up a bit). Your thoughts?
I want to see a Rico Metalite or Graftonite vs a more expensive mouthpiece. Maybe a Brillhart since he designed these Rico pieces? I use a Graftonite on tenor & a Metalite on bari right now. It's funny because I use Legere reeds which are more expensive than the mouthpiece! 😂
The Tribute has more mids in the tone while the Theo Wanne has more highs. It sounded like you needed a harder reed in the Theo Wanne, and you mentioned it likes a harder reed. I think the Tribute was destined to be better because of the hand finishing. I have played the older model Tribute and the Gaia 2 and thought neither were as good as my vintage Florida Otto Link that was straight from the factory with no modification.
Has anyone asked for a mouthpiece battle between the Vandoren V16 Tenor mouthpieces? The hard rubber vs the metal version would be a great comparison
Do a vintage slant signature tenor vs new otto link vintage tenor. OR a NY Meyer Bros vs any and all new versions.
New Otto Link tenor is coming soon
@@bettersax Cool! I enjoy the channel
lol I like both but B is kind of smoother than A
B was brighter to me...A was more mellow and laid back. I actually preferred B.
I like both.
B was "brighter" to me than A...A was a bit more laid back...I preferred B overall but can see that A might me preferred if you did want to be a bit less aggressive.
How about this line up: Jody Jazz HR vs Morgan Jazz New York vs Morgan Excalibur New York?
As ever, never a truer word spoken, BTW Phil tone tribute for me👍🎷👍
Soprano Phil Tone Sapphire vs Selmer Super Session
If you were let to chose only ONE mouthpiece for your tenor for an all around use, which one would it be: DV CHI 7*? DV NY 7*? GAIA 3 ? AMBIKA 3? Cheers!
First of all: Thanks for the video ! Very nice video!
But a suggestion: since you change the reed AND the ligature, its not a "fair" test.
Once again, thanks for the video!
I just got a second-hand GAIA3 7*. Best metal piece on the market IMO. The Tribute is also very nice sounding but it lacks power if you intend to play Jazz AND pop or Funk. I am really impressed by the GAIA3 which has more power than the first generation,
That PhilTone sounds really cool.
Both great, but something in the Phil is attractive.
4:05 - Mouthpiece A
4:38 - Mouthpiece B
When are you releasing the cheap vs expensive tenor sax video
coming next week!
Both sound nice
What are your thoughts on the Theo Wanne “WATER” mouthpiece???
is the phil tone harder to play? it sounds more nuanced
Hi Jeff, you have an excellent sound and that is inspiring !. I would like you to test the D'Addario Graftonite mouthpieces for alto and compare them with more expensive mouthpieces to see price/value relationship. By the way, what exercises have you been playing on the first part ?
Once I saw a brand named syos which make customized mouthpices. It looks very wired you may try one of those
Can you do one on an Otto link tenor saxophone mouthpiece, sorry if this isn’t specific enough I don’t know to much about mouthpieces.
Otto Link battle coming very soon.
Own a Tribute. Super satisfied with it. Own a 2nd piece that's more of a screamer, for loud situations when the monitors might not be adequate or non-existent.
Battle between durga 3 and durga 4 alto mouthpieces
Jay,
Do you have a video where you talk a bit about the differences between hard rubber and metal mouthpieces? I have a couple hard rubber and one metal mouthpiece. They feel really different but I can't put my finger on what the strengths of each are.
Did “B” have more resistance?
MY wife has budgeted some money after our instruments get repaired. It is looking like I can get a mouthpiece like this. Is it worth it to get a great, and expensive mouthpiece, to play on a beginner saxophone and then upgrade the sax later?
Definitely worth upgrading your mouthpiece but you probably shouldn’t go all the way to this level. Something more intermediate and less expensive for the first step.
@@bettersax Thank you very much. The guy at the store also showed the the Selmer Paris S80 Series Alto Saxophone Mouthpiece C*. Would that be good range or still to much?
I preferred A