Hi @Adam Mukhriz I changed the IO to M because of one simple reason: M can be accessed from HMI During simulation (Hardware not involved at all in this video), while the Input memories can not be accessed in this case. [ its worth metioning that : during simulation HMI can access to O not I]
When setting up the root screen, the hmi disconnects from the plc and says value cannot be written when i click the start button. Why is this? Also i am using TIA V14
First of all Thank you for these examples.
Can I download the examples to watch when I am not online?
Why do you change all the IO to M for this example,can wemaintain the same as tutorial 1?
Hi @Adam Mukhriz
I changed the IO to M because of one simple reason: M can be accessed from HMI During simulation (Hardware not involved at all in this video), while the Input memories can not be accessed in this case. [ its worth metioning that : during simulation HMI can access to O not I]
HI @Adam Mukhriz
I changed IO to M in order to use simulation rather than real system
Thanks brother
Thank you Nabil.
Ahmed Al Dulaimi
most welcome
When setting up the root screen, the hmi disconnects from the plc and says value cannot be written when i click the start button. Why is this? Also i am using TIA V14
Where do you get music to your tutorials?
Duvin1000
RUclips
How the Tag Table for the HMI is created is not shown. I get errors with my HMI tags. Please elaborate how you created HMI Tag Table.
in this video, I used the tags of PLC immediately. However, this means the HMI tags will be generated under the same names
thank you Nabil