DIY Rechargeable Li-Ion Soldering iron from PVC water pipe using Diesel car glow plug
HTML-код
- Опубликовано: 11 окт 2024
- #ErCanEverything #DIY #SolderingIron
🔥In this video I make a portable soldering iron using glow plug from a diesel car.
🔥How to make Soldering pot in 5 minutes, Amazing idea using Diesel Car Glow Plug
👉 • How to make Soldering ...
🔊65W Portable USB Soldering Iron from GVDA GD300
👉 • 65W Portable USB Solde...
🔊Parkside X20V Team cordless soldering iron temperature hack with temperature table
👉 • Parkside X20V Team cor...
Awesome job my friend 🍀☺️👌
Thank you my Friend🙂🤝🍀🍀🍀
Eso no debe ir soldado con estaño,se derretirá al calentar ,puede ir soldado con soldadora de punto o atornillada.
Really great DIY project 👍
Clever usage of glow plugs 👏
And it's working only with 1 cell 😍
The cheapest way to get an battery soldering iron🙂🤝
Thanks for this. Great idea made from scraps.
Very good idea 💡
I didn't think it would work with 1 battery, but it works well🙂🤝
how will you know that the battery is discharged? I don't think there is any undervoltage protection here.
You are right, there is no low voltage protection. But the goal was to make a portable cheap soldering iron from scrap materials for small jobs.
After about 10 minutes of work, you can let it charge for the next time🙂
@@ErCanEverything Makes sense.
1S 10A BMS would be great to protect the battery
Mükemmel bir çalışma olmuş
Teşekkür ederim Dostum🙏🙂🤝
Very professional work,nice effort
Thank you🙂🤝
really creative.....i like that
Thank you my Friend🙏🙂🤝🤝🤝
I am working on something similar. Just starting to realize that all glow plugs are not the same operating voltage. Can you tell me the specs on the glow plug you used, please? I do not want to use 12 volts as is standard on these glow plug hacks. BTW: there are alot of glow plug soldering iron hacks out there - yours is by far the best.
It's an 11.5V glow plug and it maintains a very good temperature at 4V but the battery must have a 15A minimum discharge current because it initially starts at 12A and drops to 5A.🙏🙂🤝🤝🤝
Good job and great idea👍
I'm glad you liked it my Friend🙂🍀
Hello, how much do I understand here is the spark plug of the car? could you give me direction, I want to make the same soldering iron as well
Awesome build! What was that red thing you shoved inside the PVC pipe?
I'm glad you liked it my Friend🙏🙂🤝
It's plastic from a cable terminal and I put it under the push button so it doesn't sink in.
Для розморожування замків добре підійде, а ще вночі
Could you tell me the model of glow plug you used? I can find several models but the tips that those models have are of a size that does not fit the tips as well.
Bosch 0250 202 045
I also had a problem with the first tip, but the second one I drilled it a little more carefully and it worked.
Possible using transformator 220 v 15 v to this soldering iron glow plug ??
Next video:
How to use a cheap soldering iron as a diesel glow plug. 😁👍
😁😃
А каким вы пользуетесь припоем для пайки ?????
is it enough if the supply is only 4.2 v
Cuando sé caliente al 100% esa soldadura se despega
Чёт слабо верится АКБ с вольтажом 4.2 даже если 3.7 вольт , нагреть свечу накала 12-24 вольт
It's hard to believe, but it's heating up.
Even the voltage drops to 3.5V by pressing the button and draws 6-8A
用一个18650动力锂电池，加一片3.7V升压模块，也可以吧！续航是几分钟呢
apa bisa pake timah bkn tenol ? Klo pakai tenol sih mudah yg buat timah bisa leleh
Ще взема да си поръчам нещо вече , от мострите . Аз съм с две леви ръце , а доста неща ми харесват , като зарядно 12 v за parkside 20v battery . 😁
👀👀👀👀👀👍👍👍👍👍👍👍👍
👋👋👋
👋🙂🤝
Warum nimmste nicht Deinen Spotwelder?
The battery I used was old and tinned and there was no way to remove the old tin🙂
Glow plug lifetime
Угу, ток ток работы свечи накала от 5 до 18 А... 😂
Нет защиты от переразряда. Аккумулятор может выйти из строя.
Push button yerine switch olsaymış
Aslında ilk başta switch koyacaktım ama sonra düşündüm ki tüm şarzlı havyalar push butonla.
Pilin güvenliği açısından bu daha iyi.
@@ErCanEverything 👍🏻
👨🔧👨🔧👨🔧👨🔧
🙂🤝
Kaboom
nm😊
+
how 12v glow plug is heated by 3.7v li ion battery. It is non sense and fake video for cheap popularity
You know there is global plugs that are 5 volts as well
Scam
Get an 11V glow plug, connect into a 3.7V lithium battery, try it.
If it doesn't work and then say it's a scam😉
It is not right to claim something if you are not sure.
@@ErCanEverything scam. You're a scammer
👍👍👍
It works. He's not saying it will work for hours on one charge, just that it will work for a quick job. This would be handy on a job where there might be soldering and you are sure there is no available place to plug in for power.
Very portable, not very long life.
Ow my God, how dangerous you are working, you could easily grind your fingers off, and then with your drill, where you can
drill into your fingers with ease.
And why not use some tape beween je bench vise, so you not make our work look all scratch up?
Cuando sé caliente al 100% esa soldadura se despega