Это видео недоступно.
Сожалеем об этом.
HOW TO ADJUST SLIDING DOORS ON A BUILT IN ROBE - HOME IMPROVEMENT MADE EASY
HTML-код
- Опубликовано: 26 ноя 2016
- How to adjust the tracks on mirrored doors on a built in robe.
Please Subscribe to my channel, also if you would like anything reviewed/ eaten or tested please leave a comment. If you find anything on my channel that you like please share the video also. Thank you
CHECK OUT PETER GRAY
/ @randomvlogstv
OR YOU CAN FOLLOW ME ON INSTAGRAM
www.instagram....
You have just made my year! My door on my wardrobe hasn't been straight and kept getting stuck. So I tried this and it worked and fixed it so easily! Here I was thinking I'd need to get a handyman in... pffttt I'm my own handyman 💪
I’m extremely happy that it work out for you Coreena. 😀 Thanks for watching my video.
That’s exactly what I say to mine too that are off track-shit doors! Watching your video to see how to fix, but thanks for the laugh as well 😂
Heather Delbert thanks for your comment much appreciated. Glad you got a laugh. I will probably install better robes with draws in the future. They are ok. I like the mirrors. 😀
You can adjust them while they're installed. Makes it easier to line up the doors
Yes, sliding doors are good when they work, they turn irritating when they don't, I fixed my wife's by looking at your video. Our house wardrobe doors have a different sliding mechanism, and that's kinda more prone to go off track very often. Well thanks, I now know what to do when they become irritating again 👍🏼
Not a problem at all. I find myself adjusting them slightly depending on if it’s hot or cold. The house has some movement and sometimes I need to do a very slight adjustment. Thanks for watching
@@RandomVlogsTV thank you very much Peter,
Very helpful, mate! Thank you for posting!
Thank you this worked for me. 👍🏽👍🏽👍🏽
I've only recently started fitting sliderobes and some of the adjustment mechanisms have 2/3 screwdriver slots, one is for adjustment up /down and the other usually has a tightening slot... If u don't tighten the wheels after adjustment then I think that's what causes them to move off level over time
rasher 62 hello, I think my doors are a little old. I only had 2 screws. The wheels have stayed the same height however I think from time to time during summer the house moves a bit which will put the off slightly. Hope your doors are ok 👌
@@RandomVlogsTV did u find out what the other screw was used for?
rasher 62 no but I will investigate further and post a comment
I will try this
Merry christmas :D
So how do you prevent it from opening on its own like the right door at the end of the video? That's the current problem I'm having.
David Kearney hope you are well. Unfortunately you will need to be pretty accurate with adjusting the wheels on the bottom to level on the tracks. I find if it’s hot or cold and you have movement in your property then you need to advise again. Alternatively buy new ones. Im adjusting mine a few times a year.
Hi, just wondering your mirrored doors don't look like they have handles, Do they slide easily?
Sonya G hi, they do slide easy. They have a bit of the boarder of the frame come out that acts like the handle that helps you slide the door back and forth. Easy to adjust at both ends of the panel. Hope that helps.
RandoMVlogs TV thank you
Sorry, but there's absolutley no need to remove the doors off the track, simply adjust them insitu.
Azzy Baby that may be the case however I found it easier to show people with the camera how it’s is done. Sure they can do it whilst still on the tracks however I wanted to make a video that was more detailed for the person watching it. Thank you for your comment.
RandoMVlogs TV I appreciate what you say, maybe you could add something to let viewers know they don’t have to remove the door and could do it insitu. This would avoid people injuring themselves or damaging the door. A camera shot showing how to expose adjusting screw while door is in place 👍😁
Where’s Laurel? 🤣🤣🤣🤣