Peltier cooling with a 4xTEC12706 block and water cooling
HTML-код
- Опубликовано: 8 ноя 2019
- In this video I will show you a bit more complex Peltier cooling system (thermoelectric cooler). I assembled a CPU/GPU water cooling system and used it to cool the hot side of a Peltier-based cooling block which consists of 4x TEC12706-type thermoelectric cooler. I also added a temperature sensor which measures the temperature of the water at the outlet of the radiator.
Video for the theory of the Peltier elements: • Theory of Peltier cooling
Video for some introduction on the practical use of Peltiers: • Peltier cooling in pra...
I connected 2 Peltiers together in parallel connection, so they draw ~12 A at ~12 V. So, I made 2x2 Peltiers and I drive them with my DIY dual-channel power supply. If you build my power supply, you can also track the power consumption and the output voltage/current.
The video for the power supply: • DIY Variable Laborator...
If you found my video fun or useful, please subscribe to help my channel grow!
Please consider supporting me on Patreon:
/ curiousscientist
If you want to buy the things I use in the video and support me at the same time, please use my affiliate links:
curiousscienti...
wish people like this would do less talking and make these videos like 15 minutes. wasting my life watching these long videos. Yall have good ideas and great things to say but you go on and on and on lol
The issue is water volume. You'll get a brief dose of cooled fluid. That said, as it cycles, it will raise overall temp.
Have you aver compared cooling the peltier with cpu air cooler and water cooling? Is cpu AIR COOLER enough to handle a single peltier module heat load as well as water cooling
hello, my advice is to separate the water block or 1 peltier 1 water block so the water block is not separated from one water halo saran saya pisahkan water block atau 1 peltier 1 water block 😊
I Imagine this set up but in the oppsite way. To cool down the water running in the system to cool down other components lets say in a computer
i feel like they charge too much for liquid cooling components...like they are such simple things...a tube? a cylinder that holds liquid??? this sht should be like 50 cents or something lmao
I like how this setup is done. I have cnc water cool spindle. Can this method be applied? My spindle is heating up quickly when under work load. I run the return from the spindle thru a radiator to cool down the water, but its not cool enough returning to the reservoir. I need to cool it more in the reservoir as it is being pumped back through the spindle. Close loop. Advise please
Hi until now im still watching water chiller videos using peltier, im not good at electronics, after watching your video, i cant understand how much power supply should we use with that kind of set up, also im not sure if youve done this, how about making the cold side putting a water cooling block instead of fans for water chiller, while hot using that radiator water cooling system. Will it work as a water chiller for aquarium?
Thank you! This is exactly what we need to design to cool down our giant telescope mirror. It takes around 455k joules to lower the Zerodur mirror 1 degree C. Peltier cooling is a must for us! We have to route the hoses somehow, but this design will get us started! Great video.
Hello, 👍👍👍👍 fan rpm????
I m also a hobbiest, I am from Delhi capital of India. I saw your video today for the first time. and I swear I have never seen such a nice, compact, concise simply but well explained video in last about ten years. You know, I hardly appreciate but your video made me honestly praise you. Really outstanding, keep it up and may almighty bless you with recognition you deserve...pritpal
The big flaw with these AC designs with Peltier modules is that no one remembers to place the radiator outside the room that will be cooled, it is similar to a water pump pulling water from a river and throwing it back into the same river - complete uselessness.
Hello. I am thinking about using heat sink and pipes to cool the water and put a fan in front of cooled heat sink to make it blow cool air in my face. That's it, I know that it is not possible to cool whole car but I'd like to have at least my face cool. Hot air exhast would be another water bucket or fan and pipe leading outside through window. Does this application make any sense?
Hello I saw in some videos that a series connection of these peltiers becomes more efficient to lower the temperature and consumes less energy, have you tried to connect the 4 tablets in series for testing? Any better results?
Hello Could this work as a personal cold air fan on a desk? I have a 120mm radiator and I am considering building something like this.
I would love to build Solar Air conditioner using this. Even the cold side should have Water pump & radiator so cold Air in be placed inside the room.
I know this video is abit older but:
What if you removed the radiator completely and replaced it with the TEC Block? So, CPU Block -> Pump -> TEC Block -> Cpu Block. Would this be a config that could work?
Can you power the same system with a power bank ? Do you have a small cooling system for a small box 📦
Why do you need the radiator and the peltier? Don't they both serve the same purpose?