Thanks a lot Sir. I understand a lot from you. I am Divisional Forest Officer. But know nothing about Electronics. You are great, you are the master of Electronics. Thanks again.
Thank you very much master, it was a very good explanation. I was wondering something, is it possible to program the other series of atmega in this way?
I am doing a project in these days and I have to use MQ7 sensor in it. I can't find a AVR code for this sensor. All codes are Arduino codes. Soo are there have any method convert Arduino code to AVR code?
good day it seem to be simpel , but from what reason i cant paste the url on the additionl board meneger url evev when i write it manuel and click ok nothing seem to hapen , also cant find it in board maneger list when i try to open.
2 ] after i maneg to download minicore board and install it still diident have good result . : invalid device signeture im sure that the hardewear conect good and its new device . the step to set the uno as isp work fine . the ic is atmega168 pu24 [im trying it without crystal - internal 1/2/4/8 mhz ]
I have a PCB with an atmega168 chip on it programmed by someone else. I want to copy the programming from this chip to new chip(s). What do I need and how to accomplish this??
Mashaallah zabardast sir Sir request k Rt809F aur Pic 150 k ki help se kon kon sey microcontroller ki programming ki jasakti he Alone pic 150 ka koe faida hey k rt809 k sath use kar saken? Thanks reply please
Sadly it wont work with the ATmega48V-10PU, it is the cheapest chip but not working. If you have a way to do it please share a video. Other than that good video.
Hello. Your vlog thanks and it works. Only one strange written program flashing led for 1 second, and the microcontroller has otherwise about 16 seconds flashing led. Where do I need to adjust the settings? You can show where settings or writes. Please help and thanks. Linki RUclips: ruclips.net/video/s3VOCNgYpD8/видео.html
Everything is the same procedure, but with a slight exception. There is a video of attiny85 programming, you can watch it on my channel. Thanks Brother 🌺❤️🌹
@@OrnatePixels sorry sir thats not my question. In one atmega ic, How many times bin or hex file can write/erase.(or can we re-upload program again and again??)
Thanks a lot Sir. I understand a lot from you. I am Divisional Forest Officer. But know nothing about Electronics. You are great, you are the master of Electronics. Thanks again.
Most welcome Bro. Thanks for your sweet comment, All the best.
I have tried to do this for so long and your tutorial was so simple and easy and it works!!!
🌺❤️🌺
from kenya..you really inspire me.."you
are the masterminds"
I have tried this and this worked perfectly fine 😊
Really helpful instructions. Thanks very much
You're most welcome brother. Thanks a lot. 🌹❤️🌺
Thank you! Perfect tutorial! Saved me! :)
Thanks sir😊😊😊
Thanks very much
Thank that much. Can I ask if once you've done this procedure can I use atmega 8 to wirite programs code as it were an atmega 328? Thanks in advance.
Thank you very much master, it was a very good explanation. I was wondering something, is it possible to program the other series of atmega in this way?
Bu yöntemi diğer Atmega serisi mikrodenetleyicilerde kullanabiliyor muyuz? Öğrenebildiniz mi?
it is really helpful , so informative and clear
Thanks a lot
Hi Dear: Can you please Create a clear video same like this for Burn bootloader to ATMEGA 328 P U with Arduino uno?
I am doing a project in these days and I have to use MQ7 sensor in it. I can't find a AVR code for this sensor. All codes are Arduino codes. Soo are there have any method convert Arduino code to AVR code?
good day
it seem to be simpel , but from what reason i cant paste the url on the additionl board meneger url
evev when i write it manuel and click ok nothing seem to hapen ,
also cant find it in board maneger list when i try to open.
2 ] after i maneg to download minicore board and install it
still diident have good result . : invalid device signeture
im sure that the hardewear conect good and its new device .
the step to set the uno as isp work fine .
the ic is atmega168 pu24 [im trying it without crystal - internal 1/2/4/8 mhz ]
Thanks Man, great tutorial!
Most welcome Brother🌺❤🌹🌻🌼💮🌸
Thanksss.. finallyyy🤧
really helpful Thank you sir
It was really helpfull
I have a PCB with an atmega168 chip on it programmed by someone else. I want to copy the programming from this chip to new chip(s). What do I need and how to accomplish this??
Sir can we use the same process to program AtMega 168 SMD?
Is it possible to read the program from a Atmega8-16 with this circuit, or do you have another video to do this.
Namaste brother thank you.
Most welcome Brother. Best wishes.
Mashaallah zabardast sir
Sir request k Rt809F aur Pic 150 k ki help se kon kon sey microcontroller ki programming ki jasakti he
Alone pic 150 ka koe faida hey k rt809 k sath use kar saken?
Thanks
reply please
i have a ATMEGA328P-PU
which one I have to select?
Good one...thanks
bravo...! Thank you sir
Most Welcom Brother.
quand j'entre "Mnicore" rien ne vient, j'ai meme changer de IDE.
is this halt video? without burn boot this not upload sketch?
why you do confuse student
thank you sir.....
💯💯💯💯💯💯
Welcome 🌷♥️
Sadly it wont work with the ATmega48V-10PU, it is the cheapest chip but not working. If you have a way to do it please share a video.
Other than that good video.
I do not get Atmega8 URL in video description. Where from I get this URL Video
ATMEGA Minicore url
mcudude.github.io/MiniCore/package_MCUdude_MiniCore_index.json
@@OrnatePixels Thanks
Sir.can you please tell me which pin in responsible for internal clock in atmega8a
Спасибо.
sir can we operate PIc and atmega 32 by using this method
How to progam that micro controller for 3phas3 speed controll?
Atmega8 Atmega16 Atmega32 Atmega328 requirement hai
Please make a video inverter controller ic programming thanks
What about atmega16? it can't be done?
Good job :)
Thanks 🌷♥️
can i use atmega8a u
hey where can i buy 355E56???
Sir where is blinking code
What's video editing software using??? Editing very much
Camtasia Studio,
with Photoshop.
🌹❤️🌹
@@OrnatePixels ohhh nice brother, thanks for your reply msge
Make a video On- Touch screen with microcontroller
Please share installation of bootloader to ATMEGA 328p u.
Sir we can. Read save code from microcontroller in this meothed
No Bro.
Hello. Your vlog thanks and it works. Only one strange written program flashing led for 1 second, and the microcontroller has otherwise about 16 seconds flashing led. Where do I need to adjust the settings? You can show where settings or writes. Please help and thanks.
Linki RUclips: ruclips.net/video/s3VOCNgYpD8/видео.html
Thanks! Can i do it in Atmega32A?
ATmega32 circuit is different, but the programming technique is almost same.
🌿❤️🌿
can we do the same for a attiny88?
Everything is the same procedure, but with a slight exception.
There is a video of attiny85 programming, you can watch it on my channel. Thanks Brother 🌺❤️🌹
How many times can we program or upload hex file atmega Ic
Maximum 20 seconds, If the computer is of good configuration.
@@OrnatePixels sorry sir thats not my question.
In one atmega ic,
How many times bin or hex file can write/erase.(or can we re-upload program again and again??)
Plz make video on atmel mega core microcontrollers...
Okay brother, I'll do it as soon as possible. Thank You.
@@OrnatePixels thanx bro...
Sir make a matel detector program ATmega8
Yes Brother, I will do it. Thank You.
Okay brother, I'll do it as soon as possible. Thank You.
Please share the code
Woh to program with Arduino nano
Same way 100%
Thanks Bro.
Hex file upload ?
With Arduino lenardo?
🥑🥑🥑🥑🥑🍔🍔🍔🍔🍔