HOMEMADE MUFFLER DELETE - 2024 F150 SOUNDS SICK!
HTML-код
- Опубликовано: 12 июн 2024
- In today's video we get a wild hair and do a homemade muffler delete on the 2024 f150 while we wait on our exhaust parts to show up. Turned out sounding really good!
DECALS - lmfscrew.bigcartel.com - Авто/Мото
True dualsssss should be the next setup
Don't forget the x pipe
Just put headers on it with straight side pipes.
Sorry 5.0 don’t sound good with true duals
True duals with magnapacks, have them on mine..it's slaps big time
Duals, X pipe and longtubes if you can afford them. If not shorties make a helluve "sound" difference
Chomper is the show stopper. The Fords well they can just try their best to keep up.
Take the resonator off
no
I love the single cabs and Chomper
Love your videos!
Man it sounds pretty dang good! Nothing will ever sound as good as a 5.3!
It's a dang coyote 5.0 buddy, no 5.3 here
It’s a 5.0..
I just got a 23 but I think the new 2024 grill looks great!!
Could really use drop shackles or maybe some 37s those wheel wells are enormous!
I used to run true duals on all my rigs but rumble and tone are more important to me having a family now. Time for a nice free flowing muffler setup, no muffler deletes or true duals.
Liked those loud exhaust when I was younger. Now it’s about the right tone. Flow masters are one of the best. Corsa has some excellent choices.
I’d say borla sounds better but that’s just my opinion. How do u like borla?
I have flowmaster outlaw cat back on my 2017 Silverado. Love the sound, and didn't break the bank! Like Borla but it is pricey.
SOUNDS AWESOME, i would leave it as is.
I did a similar thing on my honda civic. Paid over 400 for a loud ass muffler that sounded almost exactly as deleted muffler
SO i returned it and just did a fancy tip like you and sounded great.
maybe not ideal at cold startup 6 am before work if you like your beighbors but whatever,
Keep up the good work 👍.
I see a exhaust video from you I gotta watch it my favorite videos ❤
Good choice of song
That actually sounds nice
Diffrent channel from everyone else 🤝
It sounds good man
Borla atak with resonator delete sounds amazing and maybe cat delete that’s what I’m running on my 5.0 and it sounds so good you won’t be disappointed
Sounds good but not nearly loud enough for me
My thoughts exactly
Putting the rpm in the video, very nice
Dude, skip the plastic or hairy cardboard fender liners that will just trap mud and moisture behind them causing rust and just roll on some bed liner material in your rear fender wells.
Dude, i’m not sure how often you are on tiktok but you should get there and get one of those small welding machines. I am sure you’d get a lot of use out of it. Be cool to see you start doing your own exhaust work. Maybe even some custom fab stuff later on 👀
Weld a raptor trombone section onto the passenger exhaust side to make it equal length, h pipe, true dual, closest exhaust to a mustang sounding exhaust
Hey quick question. You know that “hook” that you had to bend up and out of the way in order to slide the muffler back out of the slip joint , are we sure that wasn’t a “twist” lock type of deal? Ok maybe you didn’t have the room to rotate that whole assembly at first but seeing as you ended up having to take the weight off the rear suspension to make room to remove the tailpipe/muffler assembly whole, then I suspect their might have been enough room to rotate it up and slide it back free. See if you think about what that short far pin thing was doing it makes sense and pretty trick if you ask me. It do double duty by locating the slip joint depth of overlap and keeps the the muffler and tailpipe from twisting over time or from some drunk guy doing an exhaustion tip test. “Where they stand on the tailpipe with one foot while holding onto the bedside to see if it passes” if it does pass some will even bounce up and down a couple of times for extra points. 😂 many times this exercise is conducted without the owners knowledge or consent! 😂 Yes I’ll take “reasons to leave the bar before last call for $500 please” What is the tailpipe test? Correct!
Gotta get equal length mid piping and do true dual with x pipe
We need to see a prerunner build man!
Sounds good
The pants were so funny🤣
Corsa corsa corsaaaaa plzzz🙏🏽😭 I think it’d be nasty man the corsa extreme sounds good on these 5.0s great truck tho! Love those newbodys
Love chompers soubd😮
True dual side pipes?
I wanna to make my F-150s exhaust behind the tires on both sides and deleted. Did you think this was too loud while driving?
Well I know what I'm doing when I take delivery of mine lol. Any word on the ECU being unlocked for the 2024's?
That really is a lot quieter than I thought it would be. Maybe because it actually doesn’t have duals yet?
It's not going to be super loud at idle unless the resonator and catalytic convertors are removed.Stock Cats and resonators are a restriction in the exhaust which will reduce flow and sound as much as a muffler if not more.
@@tylerhubbell6410 yea I know all that my first truck when was a 98 chevy Z-71 I had no mufflers and no cats just one pipe out of one manifold straight back and another pipe, coming out the other manifold straight back no Y pipes. I just thought the F-150 would be a little louder was all. Hey answer me this I blew up my 5.7 L hemi motor in my Dodge truck. I had a new motor put in it that was used but had about 60,000 miles less and my cold start. My pipes are not as loud and my pipes are just not as loud over all either. what the hell would cause that. It’s the same motor just one with 60,000 miles less and my exhaust is the exactly the same way it was before. So why is my truck not as loud as it used to be? Truly can’t figure this one out it makes no sense. I am getting ready to cut the cats off to make it louder. My exhaust was perfectly loud. Not too loud but loud enough for people to say damn what you got under the hood of that truck. I put the other motor in it and now it’s just not loud enough and I do not like it. Any thoughts our suggestions?
@@TaylorFirearms-4x4 every motor is different even if theyre the same exact model. id just cut the cats and get long tubes and put an x pipe.
time for a whipple
you gotta take it to that trail you did with every other truck
Ight time for tint and smack the shield
I like it…as long as it’s not too droney on the inside:
Now it's time to put a Whipple supercharger on
Whipple still isn’t available for the 24 F150s unfortunately
@@lmfscrewturbos then?🤟
i like them wheels
You should do the paid subscription thing if you haven’t where you drop exclusive vids , or get early access to vids
I will say for that v8 if you do long tubes, equal length x pipe trans am style like what Craig909 did with his f100 it would sound amazing. Also the reason it’s quiet is probably fords cats, never flow well and never will sadly.
Run true duals or y pipe duals
You should cam the f150 and put an H pipe with true duals and 8 inch tips
Delete that little reso and made a side exit. Oval shape with flat top & bottom and a vertical split so it looks like a nascar boom tube
Nice
24s and Trudell and the rear wheel well lines and Whipple supercharged
please don’t sell all the diesels
7:52 kinda looks like a toy car😂
keep it lifted please
Any CEL
Resonator delete and all the way out back sounds best. Turndowns just blow dust all over your stuff.
2m fabrication has a catless y pipe
Got a lot of trucks now let’s see another cheapest to most expensive
Not gonna lie, the look on Chomper is growing on me. 9:32
Duals with corsa/borla👍🏼
I love juice wrld to
Blip the throttle when you down shift it.
I know you are going to put the Whipple charger on the F-150. Are you going to lift it and put some 35in or 37in tires on it? Or will you end up lowering it and have some kind of radical slicks? Maybe a wait a see thing though 😂lol
Will def be going low for performance after the whipple! Might try a bigger level but not a full lift kit
Bumpers white next
1:08 “That’s so dumb” freaking pounds muffler then cuts to next clip 💀💀💀
next is a whipple
Put welds on it
Needs a Corsa extreme on it 🤦🏻♂️
No back pressure will blow the valves
Needs to be lowered
Needs true duals with h-pipe or x-pipe then maybe it will sound like a Mustang LOL
Your supose to turn the exhaust and pull it off. Not bend the tab.
Just got one of these in my work truck I am not impressed with the 5.0 it’s slow
Bro what are you driving on a daily my dads cohost that he just sold was stupidly fast
Slow as in sluggish? Slow take off? I test drove one and it felt pretty good.
@@Adjust-Fire-jy3dy it goes no where until I get up to 40
@@somethingonyt3668 6.2
Slam it and throw some welds on it
5.3 and 6.2 sound way better
Resonator gtg
I would’ve taken the resonator off
All the MIATA owners will see it .
loud truck
It sounds hokey
gotta take the air dam off
Why arent yall losers liking? I see the view count go up but what about the likes?!?!
Na the f150 sounds better than chommper tbh😂
Lower it and cam it, it would look and sound better
Unpopular fact as much as I love the coyote platform they sound like complete $hit!!!!