Noise which does not improve over silence is just annoying. Almost as annoying as watching a video which never produces a source or details for the actual product.
Obviously, this is not a commercially produced die. It is a very nicely made custom die intended to duplicate a standard JSB pellet shape in 30 Cal. Its nicest feature is that it doesn't use bolts to hold it together, but a tightly fitting steel ring. This makes it much quicker to disassemble and remove the pellets. Die material is stamped on the side, SKD 11, a high carbon, shock resistant, rust resistant die steel. The 12% chrome content officially makes it a stainless steel. Over all, nicely done. And yes, the music... is a distraction.
BC isn't as useful as you would think. You can't trust the BC manufacturers give you, because BC is velocity dependent, meaning your projectile has not just a different BC for each individual airgun, but it's BC changes in flight. It's much better to use real world data. That's why I use an application called Scopeknob, made by Eric Sanders. It uses something called velocity retention factor, which involves you chronographing at the muzzle and then at 10 yards and then dividing the 10 yard velocity by the muzzle velocity, resulting in a figure of less than 1. It's arbitrary, but it doesn't matter if you always use the same procedure. That along with your scope height, velocity, ect will give a pretty good approximation of pellet trajectory. You then take that data to the range, zero at your optimal zero, and then shoot at a close range and a far range, noting how many clicks away from your zero you are on each, compared to what the calculated trajectory is. You then plug the real world numbers into Scopeknob again, and it adjusts everything to line up with the real world data, using the theoretical data as a starting point. Once there, it prints out a tape you can wrap around your elevation turret that has all the distances marked. I've shot field target with this, and hunted with it, and it works.
By the way, the best way to find BC, if you need it, is to calculate it yourself using real world data. I just started using VRF instead because of Scopeknob.
@@ldkdjhshhdd6269 tem zap ?I cant find anything on buying one. Is there a link ... to buy one. I would like to mold the those pellets like the jsb .81 grain .357 cal
What’s the point of making the video if people can not replicate your process? Are you just showing off? If your just showing off your skills then fair play. Would be nice if you would share how you made these dies or where you purchased them.
Such aggravating music made this video unbearable to finish watching😞
Absolutely. I could only stand 30sec of it.
No music PLEASE !!!!!!
Yes,its disturbing and can't concentrate on what you are explaining
i think there was a reason why my teachers in school did NOT have music playing during their lectures...
Turn that shit music off,,can't hear you,,
So where does one obtain such a die and press parts? It looks great.
Do you have them for .177 ?
Or flathead/wadcutter for all calibers ? 🤔
Get rid of the music.
Looks cool! I wish the background music was at a lower volume or off.
Turn that annoying background music off. Soooo annoying, can’t understand anything you’re saying.
I also came here to write this comment
Do you have these ovens for sale?
I'd love to get one off those kits for.30 pellets.. How do I go about buying one
please tell me where to get that set-up & price. i want one! P.S., your rap music goota go! Not all is into rap music & turn down volume!
@@jvewaboi5714 did you find who makes it ?
@@josephpeters2367 amigo Necesito un molde regáleme su número o Escríbame Necesito un molde un mol de 35
@@albertoluisradaoliveros257 espanol I speak English
next time kill that fuucking music!
Buenas amigo usted me podría hacer el favor de venderme el molde gracias espero su respuesta
А где купить такую пресс форму,или кто изготовитель?кто подскажет?
Noise which does not improve over silence is just annoying. Almost as annoying as watching a video which never produces a source or details for the actual product.
Wonder what happens when this guy finds out there are air rifles that fire 1000 rounds per minute.
is very good 👍👍👍👍like this
perfeck
Does it make a .50 cal slug for Air Rifle.510 BMG ?
Obviously, this is not a commercially produced die. It is a very nicely made custom die intended to duplicate a standard JSB pellet shape in 30 Cal. Its nicest feature is that it doesn't use bolts to hold it together, but a tightly fitting steel ring. This makes it much quicker to disassemble and remove the pellets. Die material is stamped on the side, SKD 11, a high carbon, shock resistant, rust resistant die steel. The 12% chrome content officially makes it a stainless steel. Over all, nicely done. And yes, the music... is a distraction.
Def want one of these. Do you have name of the company who makes these
If you call that music
@@markzimmerman7279 100, % with you
hi, where can I get this mould plz?
Yes you can do without that noise you call noise music,,by the way that is nothing but noise.
Was i inertested but that annoying music made me leave after 30s
This video is pointless sense there is no way to obtain any of these molds. So why show them if they are not available.
I want to buy this setup please help me I want buy this
Where can I buy .177 and .22
Can't watch this...turn that noise off man
Where can whe buy those molds what is the naam of it
Hey ivan could you send a link to possibly be able to buy this ??
it is almost great, bat is very slow(
Donde puedo comprar ese molde para calibre .22?
I'm interested, where do I buy, who sells these molds?
Price mold?
Are these .30 caliber dies available, and if so how much USD?
Hi mate how can I get one off your molds and do you do any other sizes tia
Apakah saya bisa pesan untuk ukuran 4,5
Where can you buy that Mol
Hallo Iwan, kann ich dieses Werkzeug bei Dir kaufen, was ist der Preis ?
TDK ,cukup lah cerita lama
Gental man How order this molt ?
where can i order this
Importa ela para no MercadoLivre amigo para a gente poder comprar
Mercadolivre
Switch the damn music off!
Your music video is c.r. Ap
Onde eu compro uma forma dessa
LOOSE that FU*&ing music
I can by it Bangladesh?
como faso para adquirir uma
what a polluted loud music
Como conseguir uma desta?
Hello great job you made the matrix yourself and could you buy something like this in 9mm
GOOD DAY I AM INTERESTED IN YOUR MOLDS WHERE I CAN ACQUIRE THEM. AND THE MOST IMPORTANT THING YOU MAKE SHIPMENTS TO MEXICO
Hello I want to buy it, how much does it cost? where do they sell it thanks
Veeery slowwwww process...
How can I get one of your molds in .25 cal.?
I just press a couple of tabs on my phone, and Amazon deliver 500 pellets next day.
not really the point.
Thanks for the video, it would be great if you could have add some grouping tests to video
Where can I buy one
I would like to buy that pellet maker where I can buy that pls let me know
Good and i want to is it's
Can you provide the BC for the pellet or sulg kit? Trajectory calculators would want that input
BC isn't as useful as you would think. You can't trust the BC manufacturers give you, because BC is velocity dependent, meaning your projectile has not just a different BC for each individual airgun, but it's BC changes in flight. It's much better to use real world data. That's why I use an application called Scopeknob, made by Eric Sanders. It uses something called velocity retention factor, which involves you chronographing at the muzzle and then at 10 yards and then dividing the 10 yard velocity by the muzzle velocity, resulting in a figure of less than 1. It's arbitrary, but it doesn't matter if you always use the same procedure. That along with your scope height, velocity, ect will give a pretty good approximation of pellet trajectory. You then take that data to the range, zero at your optimal zero, and then shoot at a close range and a far range, noting how many clicks away from your zero you are on each, compared to what the calculated trajectory is. You then plug the real world numbers into Scopeknob again, and it adjusts everything to line up with the real world data, using the theoretical data as a starting point. Once there, it prints out a tape you can wrap around your elevation turret that has all the distances marked. I've shot field target with this, and hunted with it, and it works.
By the way, the best way to find BC, if you need it, is to calculate it yourself using real world data. I just started using VRF instead because of Scopeknob.
Vende?
Envoi 1. 4.5 /177 cvp
How much the mold for both 4.5 and 5.5 mm
Oi AMIGO quanto custa uma forma de chumbinho cal.762
How to buy mold
how about .22? May be 4 cavity?
Price for model
Como posso comprar ?
How many pellets can make in 1 hour?
Awesome link to the product
Did you make this set up.
Price model
I'm interested, and vice-versa, who sells these molds?
That's a great question
Tem ZAP
Tem ZAP
@@ldkdjhshhdd6269 tem zap ?I cant find anything on buying one. Is there a link ... to buy one. I would like to mold the those pellets like the jsb .81 grain .357 cal
Hello I want to know if I can make molds for Slug caliber with that and what caliber are they? where can i buy it, thanks friend
Can you share the design
Hello sir
Bom produto vc tem .22 com 18 gr obrigado
Hola amigo soy de RD donde puedo comprar un molde de eso para 22 5.5
How much
Music sucks
Для получения трёх пулек, головняк невероятный
friend you are from which country bc manufactures to venfer can you send to Brazil in 9mm caliber for pcp🇧🇷🇧🇷

hi
Le prix svp merci
Where can i buy this
Awesome results 💯🇺🇸💪
Well don keep it up ❤
Where can I get that press? I’d love to have one? How much is it? Is it a money saver?
You and me both 🤣
Very cool This way ! How do i add one of these to lime? 5,5 mm?
Where i can buy that one sir???
❤🎉❤🎉🎉❤🎉❤🎉🎉❤
How about the lead wire maker?
Do you ship via aliexpress I want to buy? this app of yours is very complicated to make purchases
是我认识的那位朋友吗?
Background music is distracting... couldn't hear you for the distracting music !?
Sir I want to buy this palace making medium in Pakistan
Good day do sell the mold in Philippines im interested, just do 22 and 30, and how much it cost in USD? Thanks
What’s the point of making the video if people can not replicate your process? Are you just showing off?
If your just showing off your skills then fair play.
Would be nice if you would share how you made these dies or where you purchased them.
Quero uma como faço
Felicidades q bien quedan, donde consigo esos moldes tienes un link de la página.
That background noise is absolutely crap annoying. I couldn't watch it. That's too bad.
Cetakan yang sangat rapi, ingin punya juga buat pakai sendiri 👍👍👍
Bro, how is the pellet you are making made of?❤️👌