Hey there, great video, and thank you for doing Carobotor’s job by elaborating on each and every option. I have a question, regarding the trigger cables, we have on the back of the K1 2 right and left signal trigger, and on the camera there is a trigger cable also, do we have to connect both sides? Or the ones on the back of the K1 are enough to run the system fine? Thank you and have a good day ahead
I just reveive this 360cam kit today and I try it really fast and look great... thank you for that ... but i leave the batman cam in the old port and it look to work in 360 mode with 3 other cam in other port 👍👍👍 but i Will wait the final instalation to find à good place for the side camera stay there when i remove the door . Plug and play and very cooooooool
Thanks for sharing this information. I purchased the K1 360 camera package from CaRobotor directly. I installed it but left the batman rear camera connected as well (so I have two rear cameras). I have a few questions that I hope you can help me with: How do you get to the 'calibration' menu? Have you purchased and installed the new 360 camera package the CaRobotor is offering now? Are you on WhatsAPP?
i no longer have the vehicle close, but when i do, ill update this thread with calibration menu. i purchased some cheap cameras to test out. but the quality wasnt great. i just purchased the carobotor ones, and will test. how is your video quality? on the batman, i realized, i could only have either the batman, or the rear cam, never both. hows your experience?
I think there should be a function for the image to be stitched, contact Carobotor, I installed the similar system on my wrangler abs image comes out seamless after stitch function. It’s a calibration required…I can see the image is not stitched properly in top view image on yours
Yes, I reviewed the option that allows you to calibrate the cameras which is built into the software. I have a few other modifications to make to my setup before I do my final calibration, so will get to it whenever I can.
@@rhd-jkur401 oh cool so there is an option for the calibration…can’t wait to see it, post the video when done. I will be installing the K1 and Jpro soon maybe j can connect my currents cameras to it
@@rhd-jkur401 thank you amazing can you post the link of the cameras also, is there a way to get high definition cameras? Also when you do the calibration process can you do a video on it too so we can see the final setup and result please…by the way awesome videos :)
@@5sunny01 I have posted the cameras i used in my post. Not sure of HD cameras. We will have to wait for Support in future. Calibration pictures to follow once i figure out the calibration mats.
The turn signal cable is on the cable that plugs into the back of the k1. see it here ae01.alicdn.com/kf/Sf8bd2fafa0304bee9ecffc478d392444n/JUSTNAVI-HD-3D-360-Camera-Car-Bird-View-System-4-Camera-360-720P-Panoramic-225-3D.jpg_Q90.jpg_.webp
These are the ones am using. Plug into one of the available USBs and format as additional storage. www.amazon.com/gp/product/B07B984HJ5/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 www.amazon.com/gp/product/B07G5JV2B5/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
hi there again but by any chance can you provide which USB adapter or reader you are using to read the memory card? the current USB line provided by carobotor company is just for single USB which I imagine is just for charging and connecting phone.
Great video and content. One question regarding the 12 pin video connector. Can you show where this connects on the back of the K1? Or, will it take additional effort i.e. (cutting, wire splicing) etc.thx.
@@rhd-jkur401 Did you have to apply any special setting for the Seicane 360 cam to enable the backup camera or works automatically? Also, did you remove the default backup camera plug/wire from the K1?
Thank you for providing a great video illustrating the 360 cam setup. You must have done a ton of research plus trial and error because Carobotor provide 0 customer assistance. I really like the K1 which provides much better sound and functions for my Jeep Sahara 2013. I have so many questions about settings and software updates. Do you think you could help me or know someone who could?
Hey mate! Thank you for all the info. I just installed the cameras but when I try to open the 360 view app, it says it needs to be ativate and pay the licence. You paid for a licence by any chance?
I'm interested in adding just the front camera, could I buy this kit and keep my batman but add the front camera only? Better yet, could I just buy another Batman camera from CaRobotor that I could mount to the front and buy a multi cable than have the higher quality of the Batman on both the front and back?
I just installed mine. The only problem I have is the turn signal cam. When I turn the my signal the video is not showing. I already turn it ON in the settings just like you showed on your video. I just want to ask did you do extra wiring? I noticed there is a white colored wire at the end of the left and right wire camera. Thanks
You need to extend those wires to your turn signals to get that. Its a 12v input that triggers the cam to switch. IF you want to use the Rear view cam instead of the batman, you will need to connect rear cam to reverse trigger too.
Hey brother finally got the cameras, I have a quick question do you have to connect any wire to the reverse light for the rear camera? Or it does it itself like Batman?
@@chesleylohnes8933 I ran with the cables similar to this vid here > ruclips.net/video/AnwdMlHY1eY/видео.html I created a disconnect on the 4 pin camera cable right by where the door disconnect is located.
Yes, the batman still works. However, you can either use the batman rear cam or the 360 rear cam. if you have both plugged in, they tend to interfere with the video. you could ideally create a switch to flip either/or.
Great video and great content! You truly are one of the smartest people regarding this unit and tech as a whole! Thank you for the video!💪
Spectacular video, very informative! I was wondering if the rear camera in the DVR is separate from the reverse camera?
You can only have one rear cam, either the batman, or the 360. not both plugged in.
Great video! Inspired me to do the same thing but after all the steps I could only get a black and white lined screen. Any idea?
Hey there, great video, and thank you for doing Carobotor’s job by elaborating on each and every option.
I have a question, regarding the trigger cables, we have on the back of the K1 2 right and left signal trigger, and on the camera there is a trigger cable also, do we have to connect both sides? Or the ones on the back of the K1 are enough to run the system fine?
Thank you and have a good day ahead
What front camera did you have before the 360? Im trying to put one on my k1 but not sure which will work for the k1
I just reveive this 360cam kit today and I try it really fast and look great... thank you for that ... but i leave the batman cam in the old port and it look to work in 360 mode with 3 other cam in other port 👍👍👍 but i Will wait the final instalation to find à good place for the side camera stay there when i remove the door .
Plug and play and very cooooooool
The door removal is what is keeping from buying and installing this. Have you found a good location to address this?
Is the K1 waterproof? I'm thinking top down and then getting rained on, its happened quite a few times.
Have only the front and rear cams hooked up, but I can't get the F-cam to mirror. My 360 app won't open. Anyone have a resolution?
Need advice on how to use USB with media player.
Thanks for sharing this information. I purchased the K1 360 camera package from CaRobotor directly. I installed it but left the batman rear camera connected as well (so I have two rear cameras). I have a few questions that I hope you can help me with:
How do you get to the 'calibration' menu?
Have you purchased and installed the new 360 camera package the CaRobotor is offering now?
Are you on WhatsAPP?
i no longer have the vehicle close, but when i do, ill update this thread with calibration menu.
i purchased some cheap cameras to test out. but the quality wasnt great. i just purchased the carobotor ones, and will test. how is your video quality?
on the batman, i realized, i could only have either the batman, or the rear cam, never both. hows your experience?
I think there should be a function for the image to be stitched, contact Carobotor, I installed the similar system on my wrangler abs image comes out seamless after stitch function. It’s a calibration required…I can see the image is not stitched properly in top view image on yours
Yes, I reviewed the option that allows you to calibrate the cameras which is built into the software. I have a few other modifications to make to my setup before I do my final calibration, so will get to it whenever I can.
@@rhd-jkur401 oh cool so there is an option for the calibration…can’t wait to see it, post the video when done. I will be installing the K1 and Jpro soon maybe j can connect my currents cameras to it
@@5sunny01 its in the video at 13:00
@@rhd-jkur401 thank you amazing can you post the link of the cameras also, is there a way to get high definition cameras? Also when you do the calibration process can you do a video on it too so we can see the final setup and result please…by the way awesome videos :)
@@5sunny01 I have posted the cameras i used in my post. Not sure of HD cameras. We will have to wait for Support in future. Calibration pictures to follow once i figure out the calibration mats.
I was going crazy finding all of this . Thank you. Is there a video where we can see where to connect the turn signal
The turn signal cable is on the cable that plugs into the back of the k1. see it here ae01.alicdn.com/kf/Sf8bd2fafa0304bee9ecffc478d392444n/JUSTNAVI-HD-3D-360-Camera-Car-Bird-View-System-4-Camera-360-720P-Panoramic-225-3D.jpg_Q90.jpg_.webp
hello and thankyou for the awesome video can you provide the SD card you are using for the DVR and also show where you installed card. thankyou
These are the ones am using. Plug into one of the available USBs and format as additional storage. www.amazon.com/gp/product/B07B984HJ5/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
www.amazon.com/gp/product/B07G5JV2B5/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
@@rhd-jkur401 thankyou so much I greatly appreciate the quick response keep up with them videos you awesome.
hi there again but by any chance can you provide which USB adapter or reader you are using to read the memory card? the current USB line provided by carobotor company is just for single USB which I imagine is just for charging and connecting phone.
Great video and content. One question regarding the 12 pin video connector. Can you show where this connects on the back of the K1? Or, will it take additional effort i.e. (cutting, wire splicing) etc.thx.
its the open port on the K1, plug and play no splicing.
What happens whenever you remove your Jeep doors?
I have a quick disconnect plug by the footwell. I could remove the doors as usual, ill just lose the Left and Right Cam
which product did you order on aliexpress?
Awesome vid. I have an existing backup camera tha tis RCA. Is there an adapter or some way to get it working as a backup camera on the K1??
You could get it working by changing settings under 8888 menu/Backcar settings.
@@rhd-jkur401 Did you have to apply any special setting for the Seicane 360 cam to enable the backup camera or works automatically? Also, did you remove the default backup camera plug/wire from the K1?
Can you use the alpine rear camera instead for the rear cam? Just curious if you happen to tried it out
you could, but not in 360
Thank you for providing a great video illustrating the 360 cam setup. You must have done a ton of research plus trial and error because Carobotor provide 0 customer assistance. I really like the K1 which provides much better sound and functions for my Jeep Sahara 2013. I have so many questions about settings and software updates. Do you think you could help me or know someone who could?
Caroboter has a new 360 setup. Might be best to join the carobotor forums and ask questions there. Make it active,
Hey mate! Thank you for all the info. I just installed the cameras but when I try to open the 360 view app, it says it needs to be ativate and pay the licence. You paid for a licence by any chance?
Did you follow the instructions at the onset of the video to activate and add the app shortcut?
Hello, were you able to solve your problem?
I've been looking for information but I'm about to give up.
I'm interested in adding just the front camera, could I buy this kit and keep my batman but add the front camera only? Better yet, could I just buy another Batman camera from CaRobotor that I could mount to the front and buy a multi cable than have the higher quality of the Batman on both the front and back?
Did you ever find out
you could enable front cam, and connect a batman to it, though not tested.
Where is the backcar setup menu?
8878 hidden menu
I just installed mine. The only problem I have is the turn signal cam. When I turn the my signal the video is not showing. I already turn it ON in the settings just like you showed on your video.
I just want to ask did you do extra wiring? I noticed there is a white colored wire at the end of the left and right wire camera. Thanks
You need to extend those wires to your turn signals to get that. Its a 12v input that triggers the cam to switch. IF you want to use the Rear view cam instead of the batman, you will need to connect rear cam to reverse trigger too.
@@rhd-jkur401 Thanks you so much.
which turn signal did you connect the wires?
Is it in the front or rear light signal?
Hey brother finally got the cameras, I have a quick question do you have to connect any wire to the reverse light for the rear camera? Or it does it itself like Batman?
My reverse cam activates same way the batman does. i can only have one connected at all times though. i choose batman, hd quality
how did you mount the camera on the mirror
2:43
@@rhd-jkur401 so how did you run the cable and what do you do to take the doors off , i run half doors in the summer
@@chesleylohnes8933
I ran with the cables similar to this vid here > ruclips.net/video/AnwdMlHY1eY/видео.html
I created a disconnect on the 4 pin camera cable right by where the door disconnect is located.
Are you able to calibrate the camera?
just never got to it. will do so someday.
Can you use 2 Batman?
I think you could use 2 batmans, but not in the 360 cam. you could set up independent front cam with the batman in 8878 settings
Does the Batman still work with this setup
Yes, the batman still works. However, you can either use the batman rear cam or the 360 rear cam. if you have both plugged in, they tend to interfere with the video. you could ideally create a switch to flip either/or.
@@rhd-jkur401 how would you do that?
@@rhd-jkur401 can I use Batman and the other camera 3 cameras and not use the 4th camera it comes with.
@@rhd-jkur401 can you DM me ?
Where is the SD card slot on the k1???
Ever figure this out, think it’s a USB port, or an Adaptor that allows SD card in an android radio
SD card is not included, though you have a free USB port you can connect an external SD and provision/format in settings
The after-sales service is a mess.I'm just making excuses for being busy.have no faith in