I purchased the LGT 695 deluxe kit. cut the holes and hooked it all up. put the power terminals to the battery and the lights come on even with the light switch not pulled out. it's a 2003 club car, what did I miss and the only way the lights go off is if I unplug the light switch. please any advice would be greatly appreciated.
Do you have a turn signal installed that controls the ON/OFF functions? That could be ON. What happens if you unplug the push-pull switch from the 2-terminals and not the 4-pin connector.
@@GolfCartInstructions I do have the turn signal cluster and it also has the hazard and horn function, but no on off function that I can see, also have the brake pad. if I unplug the pull switch ( two connections) nothing happens, if I unplug the 4 pin connection to the pull switch the lights go out. but turn signals work and hazard work. no lights
@@dushonivanic150 Can you send me a photo of the turn signal you are using? If you fill out the contact us page on our website, it will send you an email that you can reply to with your photo. rhox.us/contact_us.asp
I have a Yamaha 6-seater concierge its 15ft long I would prefer the deluxe harness so I can add turn signals and accessories, do you make a harness that long or would I have to piece one together?
What tail light do you recommend for a 2018 Club Car Precedent? I have the deluxe wiring harness but my tail light only has the 3 prong connector and no where to plug the wires for the rear blinkers?
If your taillight has a three wire plug, it will accept the turn signal output for blinkers. If you want to purchase new taillights, we carry the LGT-336 taillight set for the Precedent.
Wont the install of the converter only drain the first two batteries more, instead of draining all the batteries the same? So wouldnt a 48v to 12v converter be better for all the Batt's?
Yes Bri, you are correct. LED lights won't cause a large drain so a small reducer will work but you're always better getting a larger one for the entire battery pack to ensure even drain. Cost or ease of install are probably two factors why people choose smaller reducers.
I purchased the LGT 695 deluxe kit. cut the holes and hooked it all up. put the power terminals to the battery and the lights come on even with the light switch not pulled out. it's a 2003 club car, what did I miss and the only way the lights go off is if I unplug the light switch. please any advice would be greatly appreciated.
Do you have a turn signal installed that controls the ON/OFF functions? That could be ON. What happens if you unplug the push-pull switch from the 2-terminals and not the 4-pin connector.
@@GolfCartInstructions I do have the turn signal cluster and it also has the hazard and horn function, but no on off function that I can see, also have the brake pad. if I unplug the pull switch ( two connections) nothing happens, if I unplug the 4 pin connection to the pull switch the lights go out. but turn signals work and hazard work. no lights
@@dushonivanic150 Can you send me a photo of the turn signal you are using? If you fill out the contact us page on our website, it will send you an email that you can reply to with your photo.
rhox.us/contact_us.asp
I have a Yamaha 6-seater concierge its 15ft long I would prefer the deluxe harness so I can add turn signals and accessories, do you make a harness that long or would I have to piece one together?
We do not make an extension but you can extend it yourself.
What tail light do you recommend for a 2018 Club Car Precedent? I have the deluxe wiring harness but my tail light only has the 3 prong connector and no where to plug the wires for the rear blinkers?
If your taillight has a three wire plug, it will accept the turn signal output for blinkers. If you want to purchase new taillights, we carry the LGT-336 taillight set for the Precedent.
Wont the install of the converter only drain the first two batteries more, instead of draining all the batteries the same? So wouldnt a 48v to 12v converter be better for all the Batt's?
Yes Bri, you are correct. LED lights won't cause a large drain so a small reducer will work but you're always better getting a larger one for the entire battery pack to ensure even drain. Cost or ease of install are probably two factors why people choose smaller reducers.
It saves them money and increases profits and sales.
I need to see the video with just the basic light kit. That’s what i purchased.
You can use this video. It includes the lights but it has the basic harness, LGT-375 on a DS. ruclips.net/video/42w09bj576M/видео.html