They do blow up. They are actually very easy to snap, and when you’re grinding through solid steel, if you have it at the slightest angle, they’ll snap. I had one today snap on me, and it is terrifying
This only covered grinding wheels for angle grinders. Once you start manufacturing wheels for surface grinders, cylindrical grinders and centerless grinders, things get a whole lot more complicated. As for all of you commenting about dimensions, a good tradesman will know how to work with all measuring systems.
Very interesting. One thing that must be mentioned is that a grinder blade does have an expire date that is punched in on the inner circle... all people that works with grinders must always use safety first. I learned the hard way
+bogdog999 If you're still around - is 'reinforced friction' a specific type of cut-off disk? I mean, is it different from a diamond-surfaced steel wheel?
This is a LOOOOOGGGGG time discussion...Not too disimilar to what would happen f you tried to communicate between the Earth and a spaceship a few light years away... ;-) Diamond wheels and most "stone" wheels remove material by cutting tiny pieces of metal away, the sharp bits of grit acting like teeth. A friction cut-off wheel uses heat to remove material. Friction from high speed contact actually melts the metal and carries it away.
If they work by friction rather than abrasion, why do they contain abrasives? I did a bit of research into this friction cutting process, and couldn't find anything that looks like the cut-off disks you put in an angle grinder.
Again, if the discs in the video use friction, why do they contain abrasives? i think you should probably do your own research and then let me know when you've found what you're talking about, because I haven't been able to.
I'm so glad all this was in metric. I could finally understand what was being said especially the pressure. Love it being related to car weight too. Excellent video.
Not really, I spent many years in a fabrication shop and the only limits we had on the wheels was how small we could go before the angle grinder its self got in the way. The labels burn off/wear off in a second when they contact metal. The newer ones don't even have paper labels. Manufacturers such as Flexovit paint the entire top side of the disc.
@@gokhanozden2347 Doesnt help me much. If you want to know the specific ratios of the ingredients I dont know. Percentages should be on the manufacturer's websites. Formulas and ingredients will vary greatly between these types of cutting discs, grinding discs, and grinding wheels for surface grinders.
I was half-wondering about this. I assume it's a cultural thing. I can see how you'd call these grinding wheels if you'd never heard of them and used them. Cut off wheels I think diamond-surfaced steel.
Looks like this company is Canadian. By law we have to put all information in English and in French. The informations probably don’t fit in one, hence the two labels,
smaller wheels will have a label on both sides, some times, or if they are special purpose, like "green" wheels for carbide, cause they are made from some nasty stuff.
@av8rdav cut off wheels are generally smaller and mainly for rotary tools and not power tools. but yeah, probably the same materials, just a different process.
Years ago, one of my weldor friends was using an angle grinder after he had a few beers. The grinder kicked back and hit him in the face. He lost a few teeth and now he has a 4" scar on his face for the rest of his life.
I hate to break it to you but there are only literally 3 countries that do NOT use the metric system. USA, Liberia, and Myanma. I'm not sure what the other two use so us here in the states could be the only ones using SAE measurements still. Everything will be in metric. It's actually easier to use too, if you take the time to learn how to count to ten.
Hi, i"m chundaka from sri lanka. I have good business. Jesus last thursday. This is make only hand. Brass plate. You are interes, i can send picture. This seen can"t believe. Please send your watts app or email. My watts app. 0094770185393.schundaka@gmail.com thank"s.
Iam for flour mill plate grinding machine CNC work Me use grinding wheel after waste In 12 inch grinding wheel Me use 2 inch for grinding Waste for 10 inch grinding wheel 4mm Do you use for 10 inch?
Its an American show with an American presenter I wish they would use imperial measures...I don't immediately think in metric even though I know I should...
it's simple because 10 ml = 1 cm. 100 centimeters = 1 meter. 1000 meters = 1 kilometer. but for imperial 16 parts = 1 in. 12 ins = 1ft. 3ft = 1 yard. 1760 yards = 1 mile. In metric everything is multiples of ten, for imperial everything is weird 16,12,3,1760. if I wanna know how many cm are in 265.23km I can solve it just by looking at it, cuz I just have to move the decimal point 1 cm = 100 000 cm therefore 265.23km = 26523000cm
Sometimes it pisses me off that they use metric measurements, then imperial. I am indifferent to either, but I wish they'd stick to one or another. It's just an OCD thing. That said, all these were cut off wheels, not grinding wheels.. I wanted to see how they make bench grinder wheels, seeing as how they usually have no reinforcement. I imagine the same as these, but still, I wish they were a little more diverse.
Wheels have to be written in Metric as Europe and most of the world only does the Metric system. that said almost all grinding wheels are an English (Imperial) size just converted to metric. Bench wheels are a vitrified product that is a different process. Mixing is similar but wheels have to be pressed with very heavy presses. they are then fired at a much higher temperature in a modern kiln, for allot longer than cutting wheels. I have seen this process first hand at the St Gobain Norton factory here in the UK.
@@coventrygrindersltd Imperial IS metric. The national (and international) standards are all in metric which is then converted to imperial via a factor.
*Why* are so many comments on here from *guys looking to start, or help someone else start a factory in India* doing the same shit they're doing in the video? They're clearly scam _'artists'_ . No business would be on RUclips brow-... anyone with money has earned it and understands no-.... Random guys on RUclips don't exactly present as-.. ..
Best reply i've had to my original post. But I don't know how easily i could break old habits. If someone says something like "cut a scrap piece 4-5 inches long".. I could guess roughly to within that inch. If they had said "the support frame is 8 meters wide" I'd be trying to COMPARE 8 feet as a guess. Which of course is wrong... But i don't know a meter as quickly as someone who knows the system as well.
To complain about grammar in the same sentience in which you failed to capitalized anything says a lot about how much you actually know about proper grammar. Correct spelling is just 1 aspect of language, proper presentation is also required.
' how about the grinding wheel with 6 inch / 12 inch,,, i dont see this video about sand grinding wheel like this below,,, ' en.wikipedia dot org/wiki/File:Slijpsteen.jpg ' upload.wikimedia dot org/wikipedia/commons/c/cb/Slijpsteen.jpg
I say 1 millionth of an inch. Which is .000001--- How do you metric system lovers say the equivelant of .0000254 in your metric? Just asking, i don't get the "simplicity" of metric system. Didn't grow up around people using the different prefixes that metric uses. I'm used to inch, feet, yards, mile, which I myself think is simple, since thats what i knew growing up.
I've never understood how these wheels could be so tough spinning at 12,000 rpm, it's insane that they don't blow up !
Some do! That’s why you need to keep safety shields in place + eye protection!
Buy china made had many blew up on me
They do blow up. They are actually very easy to snap, and when you’re grinding through solid steel, if you have it at the slightest angle, they’ll snap. I had one today snap on me, and it is terrifying
they can usually handle teice that. do not do that, it's supposed to be safety margin
This only covered grinding wheels for angle grinders. Once you start manufacturing wheels for surface grinders, cylindrical grinders and centerless grinders, things get a whole lot more complicated. As for all of you commenting about dimensions, a good tradesman will know how to work with all measuring systems.
Somebody has to hear that voice every night at dinner!
Evilien eat your greens!
Evilien wash your hands before dinner!
That voice alone was brain splitting. Throw in that screeching guitar and you have a perfect storm.
PASS THE ASPARAGUS
Somebody GETS to hear that voice at dinner, you mean ;-)
Very interesting. One thing that must be mentioned is that a grinder blade does have an expire date that is punched in on the inner circle... all people that works with grinders must always use safety first. I learned the hard way
I had a grinding disc almost snap on me today. It’s insane how it can start as a tiny chip, then the rest just starts to crumble
Pillows, mattresses and now grinding wheels? Man the things that have an expiry date...
Reinforced friction cut-off disks, not "grinding wheels".
+bogdog999 If you're still around - is 'reinforced friction' a specific type of cut-off disk? I mean, is it different from a diamond-surfaced steel wheel?
This is a LOOOOOGGGGG time discussion...Not too disimilar to what would happen f you tried to communicate between the Earth and a spaceship a few light years away... ;-)
Diamond wheels and most "stone" wheels remove material by cutting tiny pieces of metal away, the sharp bits of grit acting like teeth. A friction cut-off wheel uses heat to remove material. Friction from high speed contact actually melts the metal and carries it away.
If they work by friction rather than abrasion, why do they contain abrasives? I did a bit of research into this friction cutting process, and couldn't find anything that looks like the cut-off disks you put in an angle grinder.
Rob Mckennie look at one for a chop saw then. Like the ones he is talking about and that are shown in the video
Again, if the discs in the video use friction, why do they contain abrasives? i think you should probably do your own research and then let me know when you've found what you're talking about, because I haven't been able to.
Best show on TV. Well, that and the Carbonaro Effect.
Her voice is more abrasive than those wheels
haha, I always wondered how she got that gig.
Chris Mclendon probably the same way as most wannabes ..... on her knees.
yupperoonies haha that is fucked up.
she pronounces radiators (rad-ee-a-ter)
I don't know, to me her voice was soothing, I liked it.
The narrator is grinding my brain with that voice.
I'm so glad all this was in metric. I could finally understand what was being said especially the pressure. Love it being related to car weight too.
Excellent video.
I wonder how they can visit a factory, film there for multiple days and still get the name of the product wrong
They probably just either bought the videos on something like fiverr or stock videos
God please don’t tell me this is the new voice of how it’s made
.... define new...
nice video, gain knowledge! Know a little bot about grinding wheel, but have never seen how to make it.
we have grinding wheels with a diameter of 1.0 mtrs and width of 100mm at work.
Easiest way is to compare Meters with Yards. 1 Meter is roughly 1 Yard. :)
Silicon vs silicone. KNOW THE DIFFERENCE! @ 0:42
Silicon carbide? = Good abrasive!
Silicone carbide? Not good...
Learner-Learns Good observation.
Not really, I spent many years in a fabrication shop and the only limits we had on the wheels was how small we could go before the angle grinder its self got in the way. The labels burn off/wear off in a second when they contact metal. The newer ones don't even have paper labels. Manufacturers such as Flexovit paint the entire top side of the disc.
What are the mixes?
Do you know about the formula?
@@gokhanozden2347 Far out mate this was 9 years ago, all the comments arent in order, you'll have to remind me, mixes for what exactly?
@@NomadUniverse cutting disc
@@gokhanozden2347 Doesnt help me much. If you want to know the specific ratios of the ingredients I dont know. Percentages should be on the manufacturer's websites.
Formulas and ingredients will vary greatly between these types of cutting discs, grinding discs, and grinding wheels for surface grinders.
@@NomadUniverse not on their website
discs formulas
Those vibratory feeder bowls are neato
the powder resin you have used is phenolic. What about liquid resin?
... that's a disc, not a wheel.
I was about to make the same point :)
@@jamescrawford1534 Well let's be sensible. Discovery channel. I doubt a journalist would know a tool if it bit them.
That is not a disc it's a weel
And this is the music robots listen to at work.
The closed captioning said damn beach sand instead of damp beach sand. lmao
"... Such as metal or brass." Yo, brass is a metal!
Metal or glass mate, not brass.
Those are not grinding wheels, those are cut off wheels. Try to grind off something with them and they'll break on you. Ps. Norton is the best.
I was half-wondering about this. I assume it's a cultural thing. I can see how you'd call these grinding wheels if you'd never heard of them and used them. Cut off wheels I think diamond-surfaced steel.
I've had a dremel w/ cut off wheels, and one did not break or shatter on me... Yet.
No the best is PFERD!
Abrasive cut off wheels are a type of grinding wheel
Mi'el Blanquea Esquivo depends what it’s made for. The thicker ones are for grinding and the thinner ones are for cutting.
i never see a grinding wheel with a second label.. and i use good brands.
Looks like this company is Canadian. By law we have to put all information in English and in French. The informations probably don’t fit in one, hence the two labels,
These are cutting wheels not grinding wheels. I was lied to by the title
smaller wheels will have a label on both sides, some times, or if they are special purpose, like "green" wheels for carbide, cause they are made from some nasty stuff.
Where do they get this "musick"? ? ?
@av8rdav cut off wheels are generally smaller and mainly for rotary tools and not power tools. but yeah, probably the same materials, just a different process.
These are cuttoff wheels! Not grinding wheels.
Years ago, one of my weldor friends was using an angle grinder after he had a few beers. The grinder kicked back and hit him in the face. He lost a few teeth and now he has a 4" scar on his face for the rest of his life.
Lovely
Awesome!!
After sticking label they look like vinyl records.
THE AUTOMATED MACHINERY
I hate to break it to you but there are only literally 3 countries that do NOT use the metric system. USA, Liberia, and Myanma. I'm not sure what the other two use so us here in the states could be the only ones using SAE measurements still. Everything will be in metric. It's actually easier to use too, if you take the time to learn how to count to ten.
Hi, i"m chundaka from sri lanka. I have good business. Jesus last thursday. This is make only hand. Brass plate. You are interes, i can send picture. This seen can"t believe. Please send your watts app or email. My watts app. 0094770185393.schundaka@gmail.com thank"s.
How to use id grinding hard material remove from fast material ... Please send me reply
It probably smells so good in that factory
Never wore a mask while using those and actually liked the smell.🤗 From now on I wear a mask.😮 Didn't know they have ones that cut glass either.
Would you say it’s dangerous not to wear a mask while grinding?
good
"silicone carbide"
I know... right??? LOL!
Iam for flour mill plate grinding machine CNC work
Me use grinding wheel after waste
In 12 inch grinding wheel
Me use 2 inch for grinding
Waste for 10 inch grinding wheel
4mm
Do you use for 10 inch?
which company produces such smooth machinery?
please tell me the which abrasive and how much quantity use a one disc
Its an American show with an American presenter I wish they would use imperial measures...I don't immediately think in metric even though I know I should...
Please, I need a factory that sells this
Kurt Angle match was such an injustice. Shame on you WWE
These are discs not wheels, how do they make bench grinder wheels.
I want to buy this machine where i get one
ابحث عن مورد لهذه الالة الى الجزائر
it's simple because 10 ml = 1 cm. 100 centimeters = 1 meter. 1000 meters = 1 kilometer. but for imperial 16 parts = 1 in. 12 ins = 1ft. 3ft = 1 yard. 1760 yards = 1 mile. In metric everything is multiples of ten, for imperial everything is weird 16,12,3,1760. if I wanna know how many cm are in 265.23km I can solve it just by looking at it, cuz I just have to move the decimal point 1 cm = 100 000 cm therefore 265.23km = 26523000cm
What are the incredience and the cemical name and the formula?
Hey, How it's Made folks. We don't use milimeters, centemeters or celceus. Get with the program.
I'm curious as to what the music is.
Can you imagine what it is like to clean these things?
Please cutting wheel material and resin bond thieri
Sometimes it pisses me off that they use metric measurements, then imperial. I am indifferent to either, but I wish they'd stick to one or another. It's just an OCD thing. That said, all these were cut off wheels, not grinding wheels.. I wanted to see how they make bench grinder wheels, seeing as how they usually have no reinforcement. I imagine the same as these, but still, I wish they were a little more diverse.
Wheels have to be written in Metric as Europe and most of the world only does the Metric system. that said almost all grinding wheels are an English (Imperial) size just converted to metric. Bench wheels are a vitrified product that is a different process. Mixing is similar but wheels have to be pressed with very heavy presses. they are then fired at a much higher temperature in a modern kiln, for allot longer than cutting wheels. I have seen this process first hand at the St Gobain Norton factory here in the UK.
+Coventry Grinders Ltd If you're still around - why the increase in production processes for bench wheels versus grinding versus cutting wheels?
Probably due to no reinforcement. That fiberglass mesh provides a good deal of structural integrity.
QUOTE:"I wanted to see how they make bench grinder wheels"...............Try here instead: ruclips.net/video/XBr8YsvzZys/видео.html
@@coventrygrindersltd Imperial IS metric. The national (and international) standards are all in metric which is then converted to imperial via a factor.
Not grinding wheels, cutoff wheels.
Who knows the manufacturer of these machinery? the company name please
I was just watching kids getting trolled on minecraft....IDK what happened lol😂
"grwanding wheel"
God, What is the name of the device to put the bushing?
could you help me from where i can buy this line?
When a blade broke and hit me in the face... and lost an eye and a lot of damage there after.
Hence the importance of a face shield. But it’s still scary, cause even with a face shield on, it could still get ya
3:46 Like the way she says "hard as a rock", sounds like she's had some practice at saying it a lot.
That was my nickname in the club.
hey its the howler woman again
Sand with mixing witch glue.
Cutting disks not grinding wheels
how do inchlovers say 1 nanometer in parts of an inch?
We have these fancy things called fractions.
Rhandahl measures dick, brags to America.
*Why* are so many comments on here from *guys looking to start, or help someone else start a factory in India* doing the same shit they're doing in the video? They're clearly scam _'artists'_ . No business would be on RUclips brow-... anyone with money has earned it and understands no-.... Random guys on RUclips don't exactly present as-.. ..
india is the largest country in the world that works with metal manufacturing and salvaging especially with ships.
Best reply i've had to my original post. But I don't know how easily i could break old habits. If someone says something like "cut a scrap piece 4-5 inches long".. I could guess roughly to within that inch. If they had said "the support frame is 8 meters wide" I'd be trying to COMPARE 8 feet as a guess. Which of course is wrong... But i don't know a meter as quickly as someone who knows the system as well.
To complain about grammar in the same sentience in which you failed to capitalized anything says a lot about how much you actually know about proper grammar. Correct spelling is just 1 aspect of language, proper presentation is also required.
I have a test tomorrow, what am I doing here?!?
Why are the steel rings placed in the center ?
Yo reinforce the shaft
to protect the tool spline from being worn by the abrasive material if it slips a little.
I always have accident with those cutting disc🤦
what is pirox?
This woman's accent is worse than south park's idea of a canadian accent.
If you ever wondered what happens to the people who get fired from ASMR and turn bitter....
4:28 this unit is metric lol
grinding wheels to polish... i guess the world changed alot .
Why are the measurements on this show always in European metric??
Oh goddamn this voice is abrasive. ugh
Her sound is touch to stand
You obviously missed my sarcasm. What does that make you?
So they only employ a couple of people? Wow, totally automated.
Im amazed no-one has commented on the "hard as rock"-part in all these years
+korneri What about it?
+Pete Brown leave him, probably just a pubescent kids joke
um... u know that grinding wheels shown here do jack shit to glass
'
how about the grinding wheel with 6 inch / 12 inch,,,
i dont see this video about sand grinding wheel like this below,,,
'
en.wikipedia dot org/wiki/File:Slijpsteen.jpg
'
upload.wikimedia dot org/wikipedia/commons/c/cb/Slijpsteen.jpg
thank bai.
send me link video.
350kg is not the weight of 30cars that is the third of one car....
she said 350kg/cm2
350 kg force applied in 1 square cm.
I want all the ladies to know I can be hard as a rock also
a groinding wheul
lol.... she said "silicone carbide"....
I was just going to say the same thing. Apparently they don't double check their videos before playing them for the public.
MY EARS!
Cutting disc not grinding wheel
I hate those damn labels
@monkeyman522 huhu she sayed hard as a rock and shaft huhuhh
I'm the idiot? You obviously way missed my irony!
silicon, not silicone, ffs
The world needs to adapt to the American system.
LOL
0:44 "Silicone carbide", really?
PHILLIPS YOU MUG
I say 1 millionth of an inch. Which is .000001--- How do you metric system lovers say the equivelant of .0000254 in your metric? Just asking, i don't get the "simplicity" of metric system. Didn't grow up around people using the different prefixes that metric uses. I'm used to inch, feet, yards, mile, which I myself think is simple, since thats what i knew growing up.