Bro, I love your channel and your content is always LIT. I wish you would make more videos. Oh yeah, you should've put a coyote in the drift car, Gavin has a ton of coyote parts for you lol he probably have a whole motor for you bro
Love you Sean Gavin Dani and all y’all boys for being the way y’all are I love that Gavin wanted to help you get the car up to start making vids he wanted to see you up and going again winning man keep up the determination and motivation
Would love to hear a "total cost" or a breakdown or something of the entire swap/process. I've wanted to do this swap project for a year or two now but I'm having trouble figuring out exactly how much it's gonna cost me and I don't wanna dive in to a job that's gonna cost me $30k by the end lmaooo.
Quick question in case you didn't notice and hopefully it can be fixed before it messes up your pads. If you look at the beginning of your rotor swap, arent you installing them in the opposite direction from how they were installed on the old rotors?
this actually makes me so happy because I bought a 1999 mustang with a 3.8 v6 as a project car and I decided I'm going to rebuild a 350 chevy and and swap it
Did you happen to replace the oil pick-up tube O ring while you had it out of the car? If not, definitely wanna make sure to on the next motor. May or may not be your problem now, but it's definitely one of the big issues on the LS engines. You can get a clamp-bracket that secures it on the "loose side" as extra insurance too.
I realize that this has been put together for quite some time, but is this a truck 4.8? Or is it a 5.3? I mean, there's not a huge horsepower and torque difference, but there definitely is a difference. I'd LOVE to see that plastic truck intake be replaced by a LS1 intake manifold...
Can you explain the paintjob and how you made the panel line and rivets look so real on this baby!?? Is it a wrap? I wanna give my truck this same paintjob.
Hey so I'm planning on finishing on what y'all started with the twin turbo v6 sn95 got any tips or problems that I might run into. Also it's gonna be the turbo kit from ebay for 1.6k
Gavin a goat for helping you out just showing how much of a real one he is
I've got a headache, but getting it worse is how much I love this YT channel.
Hopefully it went away hahaha! Thank you brotha!
Rip to your head
We love you poe. keep going brother, the car will get there.
Bro, I love your channel and your content is always LIT. I wish you would make more videos. Oh yeah, you should've put a coyote in the drift car, Gavin has a ton of coyote parts for you lol he probably have a whole motor for you bro
Proud of you overcoming the shitty odds you we’re handed brother . Cars sounds amazing aswell
sounded amazing until obviously cylinder number 2 decided to quit his job its always that pesky cylinder 2
It just needs new lifters poe!!! It’s notorious on 5.3s just change the lifters and watch it’s magic brand new motor 🔥
World record of videos in one day.... suprized to see 2 uploads within 6 hours
Heck yeah Poe. Heck yeah. Glad to see some more updates on thus car
Everyone needs a friend like Gavin in their life
Gavin is the G.
I remember seeing the video of Gavin helping out, Been waiting for this video and the rest to come
Guy in the background jus poppin wheelies in the wheelchair would be me🤣🤣🤣
Let’s go! Happy to see you back
Gotta love Gavin!!!
Love you Sean Gavin Dani and all y’all boys for being the way y’all are I love that Gavin wanted to help you get the car up to start making vids he wanted to see you up and going again winning man keep up the determination and motivation
Glad I got to meet you at tx2k man! Hope everything works out and these vids keep shooting out !
For sure brotha! Nice meeting you down there, next year I'll take a car!
Man that is such an awesome sounding 5.3. I hope mine sounds like that when it's installed in my project.
car sounds dope as hell. and props to trace for helping out poe that true friends for ya
BTB was one of my favorite jobs.
Man so good to see you working on this car again
Ayee the stang!
Would love to hear a "total cost" or a breakdown or something of the entire swap/process. I've wanted to do this swap project for a year or two now but I'm having trouble figuring out exactly how much it's gonna cost me and I don't wanna dive in to a job that's gonna cost me $30k by the end lmaooo.
Let’s go Poe good video today
Quick question in case you didn't notice and hopefully it can be fixed before it messes up your pads. If you look at the beginning of your rotor swap, arent you installing them in the opposite direction from how they were installed on the old rotors?
They got installed properly! For the shot I hadn't spun it around yet. Good eye!
@@PoeBoys last thing we want is to replace pads and rotors again. More money for a LS turbo set up. :)
gavin with the 5.0 swapped 68 camaro, and poe with the ls swapped new edge, awesome
Hitting us with that double upload.
Bro you are looking so good, you’ve come a long way love the vids
Love the video bro!! Cant wait till the og stang is running
this actually makes me so happy because I bought a 1999 mustang with a 3.8 v6 as a project car and I decided I'm going to rebuild a 350 chevy and and swap it
Let’s gooooo💪 new video
Looking good my boy!
Glad to see you back at it!
Bro I have a 2001 Ram 1500 extended cab 4x4 with a 440 big block with twin superchargers and I love seeing other crazy builds
so happy
Hey Poe Again!!
Was just saying im bored as shit… BING NEW POE BOYS!!! Hell yeah!!
HELL YEAH POE KEEP IT UP
The goattt
hell yeah! that thing looks clean af keep it up sir
*gets truck 5.3*
*Is surprised when it has lifter tap*
did you hear the 0 oil pressure for 5 minutes part? She was definitely knocking on top of lifter noise when that happened.
Miss seeing you bro I know when I watch your vid i was going to smile for shur
Ngl I wanna see Poe as a millionaire because I feel like he would still be using sipties for everything as per usual😂😂
Did you happen to replace the oil pick-up tube O ring while you had it out of the car? If not, definitely wanna make sure to on the next motor. May or may not be your problem now, but it's definitely one of the big issues on the LS engines. You can get a clamp-bracket that secures it on the "loose side" as extra insurance too.
Thanks for showing some love to new edge mustangs BRO🥰 love to see it
Wonderful
Dude glad to see you making videos.
POES BACK!!
Hi Cameron, this is Hunter.
I miss this
Glad to see you back and healthy love seeing you on itsjusta6. Yall like pea
Hi Cameron!
It's Bimini
It’s gonna suck not seeing you in Gavin’s vids
That's a lifter tick. Super common in those.
Finally more videos on this car, keep killing it poe
Damn this channel is the best soo keep up the good work
Letzzzz gooooo
I realize that this has been put together for quite some time, but is this a truck 4.8? Or is it a 5.3? I mean, there's not a huge horsepower and torque difference, but there definitely is a difference. I'd LOVE to see that plastic truck intake be replaced by a LS1 intake manifold...
Its a 5.3, and I already have a better option as far as intake manifolds go! It is going on the new engine!
@@PoeBoys what muffler/resonator is on this? Sounds great, I just don't see a brand or anything on it
that's what's I'm talkin about , brother !!!!!
You didn't replace the oil pump ???? I wonder what the sponsors are thinking ?
need a 5.0 swapped Camaro now
Gavin already got that covered!
Keep moving forward it will get better.
Can you explain the paintjob and how you made the panel line and rivets look so real on this baby!?? Is it a wrap? I wanna give my truck this same paintjob.
You mind filling me in on what radiator you’re using? Trying not to use a Ford and have hoses going from one side to the other
A bow tie powered mustang, only stang I'd ever own 🤣
Keep going strong poe u got this!
I love tanners s2k man. I own an 02 rsx.
More !!!!!!!
Keep that clean hair cut!
YASSSSS .... What transmission did you guys use to mate the LS with?
did you do a video on the paint job
Love you poe 💜 keep up the good work bro
What’s the part number for the radiator you used and is the stock fan Working good
We ❤️ PoeBoys!!!
Do you have the part number for the steering shaft and what headers did you use ?
Are you using stock gauges on the car?
🔥🔥🔥🔥
Never had any of this problems with my ford engine
Sick man
Sheeeeesh
brake rotor installed backwards?
I was gonna get the same breaks
Hey so I'm planning on finishing on what y'all started with the twin turbo v6 sn95 got any tips or problems that I might run into. Also it's gonna be the turbo kit from ebay for 1.6k
Expect to spend $4000
Did you degrees the break disk bc they might slip if there new lol
Where did u get your t56 transmission @PoyBoys
Rotors on the wrong side?
Lol no wonder why i almost smack my face off my jeep steering wheel 😂
Well then
Drift car have a name?
Skrrt
hahaha W gavin
Mo Poe fo sho
How come it’s not fixable?
That's just the mustang life
That's is my dream car
Nice
Do you have a link for the steering shaft and headers you used?
Are the rotors directional ?
Cool
👋
You should supercharge your car and put two twin turbos
What rims do you have on it?
I havent watched a video in like a year looks like you lost a lot of weight