Thank you Thuy!! I’m going to make some of these since they are out of stock everywhere and over priced!! Instead of hooking the harness to the rebar you could cut chain link in half and weld it to the top ring in 4 spots, then it won’t slide around and wear out the net.
Great Video! I've been looking for those hoop nets everywhere. Only place that has them is Guns and Fish in Fairfield and they are charging $100/each, what a rip off! I am going to try and make my own. Thanks again for the great content!
Following your video, I made two hoop nets today and will continue to make another 4 tomorrow. I made 1/2 inch rebat hoop nets, which are difficult to bend into a circle.😂
@@Fishing247 can you post the links because it’s difficult to find also I seen on your videos with the green netting where did you get the green netting
Just a thought but I have seen these hoops at the store with lead weights attached to the bottom hoop. I cast my own weights and it's another fun and easy thing to do. My mold is an 8 and 10 OZ but they come both bigger and smaller. Just something else that can be done. I was thinking of a homemade bait tube out of PVC laced into the loose netting? So many little options people can do when the make their own!!
Another great video on how to make a Hoop Net from the legendary (Fishing 247). You perfect it every single time. This design works/looks so much better as compared to the previous ones. Also, the pre-made (Promar Net Replacement) is widely available to purchase online without the need for a custom-made net to fit around the hoop. Great job Brother Thuy. You should consider making/selling these hoop nets on your channel. It does not hurt to make extra money out of your passion/hobby. A small critique from me is safety. When you use a power tool/welder consider getting your self a good pair of goggles and a welding mask. This will help protect your face/eyes from getting hurt. Maybe this is going to be a Xmas present for you from me lol. Keep up the good work Brother.
Try to type promar replacement net in Google search and a few will come up. I have not bought them for a long time so I don't know if the the company I brought from still have it
It will be rusted, but will lastinger than the net. I have used them for 5 years aready. The comer round trap I brought for $180 rusted too. You can coated with PVC or rubber, but it will cost more.
Thanks for the helpful video you inspired me to fix up my old hoops and maybe build a few more. Do you think green netting will work ok? It is what I could find online.
You can you any strong nets. The strong one will last longer. I bought the Promar replacement net and it works good. Whatever net you can find is ok right now. The green one works ok too. My friend use green net and it work ok.
Thay Thuy you said about $5 for the 3/8'' rebar, but the text overlay said $6 -- did you adjust for supply chain issues while editing the video? Very forward thinking and always informative. I'm still learning from you years into the future.
Hello Duke. I hope you are doing well. I really miss the old days. Thanks for continue to support me. Your comment means so much to me. Stay safe and I hope to see you soon. ❤️
Nice Thuy. You should start an Amazon affiliate account then post the parts of the Amazon items if there’s any Thuy. Make a little $ other than RUclips for donation etc… good improved hoop net
Thanks Darren. I am not very good with technology and will ask Moo to help me. Will be more money for the poors. Thanks for your supports brother. Stay safe.
I'm cringing watching you used the grinder and welder!!! The grinder is probably one of the most dangerous power tool there is, that cutting disc can break and shatter sending broken sharp, high velocity shrapnel into your face , taking a eye out blinding you or opening up your face maybe both, you need to wear safety glasses and a face shield when using those power tools , safety 1st!!!! I don't want to see you injured or lose a eye, be smarter
Thank you for this. I was looking everywhere how to tie a new net and this is very helpful
Glad it was helpful!
Your pots not only look great but works great too! I actually caught crabs from your pots!! Thank you!!
I am grad you caught 🦀🦀🦀 with my hoops. 😁
@@Fishing247 I didn’t lose yours but I lost the store bought one. Yours are good luck!!!
@@stephaniedoan7114 If you keep losing hoops, I would have more milk tea drinks. Lol
@@Fishing247 😂😬😳😅
Thanks for sharing buddy I'm by it today already I go crabbing Saturday
Thanks Oleg. Good luck.
Loved this video. Looks great. Gonna try building one here soon.
I am glad you like the video. Thanks for watching.
Nice work Thuy. Thank you for your videos and support from my business.
Thanks for watching. I try to support you and your businesses.
Love your videos. Helps me save money 👍
I am glad you like the video. Have fun making them. Almost time for crabbing.
Nice work, Thuy. Great instructional video.
Thanks for your supports. Go get them before the commercial drops their traps.
Nice I like that it good to see you are doing good glad your back....
Thanks Miguel for your supports. Good luck fishing/crabbing.
Great video.
Thanks. I am glad you like the video. Good luck crabbing.
Very nicely done brother. Man of many trades. Keep up the great Videos.
Thanks brother.
Good job ! Very informative. Keep posting the videos.👍🏾
Thanks.
Thank you Thuy!! I’m going to make some of these since they are out of stock everywhere and over priced!! Instead of hooking the harness to the rebar you could cut chain link in half and weld it to the top ring in 4 spots, then it won’t slide around and wear out the net.
Thanks for great suggestion.
Great Video! I've been looking for those hoop nets everywhere. Only place that has them is Guns and Fish in Fairfield and they are charging $100/each, what a rip off! I am going to try and make my own. Thanks again for the great content!
I do not like business to rip off people during this time. That's why I posted the video for people to make their own. Thanks for your supports.
Good idea
Thanks.
Great video anh Thuy. This version of crab pots seem really sturdy. You got me thinking about learning how to weld just to make my own crab pots...
Make it all. Like 9 or 10". Works better than Promar 6" tall.
Great job brother great video
Love your channel lot of information
Thanks Arnold for your support. I love to do DIY than fishing videos.
Following your video, I made two hoop nets today and will continue to make another 4 tomorrow. I made 1/2 inch rebat hoop nets, which are difficult to bend into a circle.😂
That is awesome! 3/8 is better to bend and then I put sinkers in the bait cage to add weights. Thanks for watching.
Where do I get the netting
@@michaelkhmukid Google promar replacement net. I also found some replacement landing net on temu.
@@Fishing247 can you post the links because it’s difficult to find also I seen on your videos with the green netting where did you get the green netting
Just a thought but I have seen these hoops at the store with lead weights attached to the bottom hoop.
I cast my own weights and it's another fun and easy thing to do. My mold is an 8 and 10 OZ but they come both bigger and smaller.
Just something else that can be done.
I was thinking of a homemade bait tube out of PVC laced into the loose netting?
So many little options people can do when the make their own!!
I agree with you that there are so many options. Thank you Sir for your comment. Stay safe.
Nice Thuy!
Thanks Matt for watching and supporting me.
Nice.. thanks
Welcome 😊. Thanks for watching.
Another great video on how to make a Hoop Net from the legendary (Fishing 247). You perfect it every single time. This design works/looks so much better as compared to the previous ones. Also, the pre-made (Promar Net Replacement) is widely available to purchase online without the need for a custom-made net to fit around the hoop. Great job Brother Thuy. You should consider making/selling these hoop nets on your channel. It does not hurt to make extra money out of your passion/hobby. A small critique from me is safety. When you use a power tool/welder consider getting your self a good pair of goggles and a welding mask. This will help protect your face/eyes from getting hurt. Maybe this is going to be a Xmas present for you from me lol. Keep up the good work Brother.
Really appreciate you my brother. I will be extra careful next time.
Awesome idea! Really nice
Thanks Nick.
Great job 👍!
Thanks.
GOOD JOB
Thanks.
Awesome job sweet net u should sell them
Lol. Thanks.
I like a welding hoop. Just curious, which welding tool or machine do you use?
Yeswelder ARC 125 DS. Thanks.
Have not been able to find replacement nets. Do you have another retailer
Try to type promar replacement net in Google search and a few will come up. I have not bought them for a long time so I don't know if the the company I brought from still have it
@@Fishing247
I did this already. Different ones pop up. Do you have a part number or something. Thanks for the fast reply
@@georgikarabelov265 I bought all of my replacement net at LP fishing supply. Sorry I do not have the info you requested.
Hello a lam dep qua co vui kg
What size bet did you order? Was it the large?
I ordered size 30" promar replacement net. Thanks for watching.
Thank you. Do you think the rebar will last two seasons?
It will be rusted, but will lastinger than the net. I have used them for 5 years aready. The comer round trap I brought for $180 rusted too. You can coated with PVC or rubber, but it will cost more.
nice looks like the ones i make!
Awsome brother. Good luck with crabbing.
Thanks for the helpful video you inspired me to fix up my old hoops and maybe build a few more. Do you think green netting will work ok? It is what I could find online.
You can you any strong nets. The strong one will last longer. I bought the Promar replacement net and it works good. Whatever net you can find is ok right now. The green one works ok too. My friend use green net and it work ok.
A di cau CA co nhieu Nho cho em nha
Thay Thuy you said about $5 for the 3/8'' rebar, but the text overlay said $6 -- did you adjust for supply chain issues while editing the video? Very forward thinking and always informative. I'm still learning from you years into the future.
Hello Duke. I hope you are doing well. I really miss the old days. Thanks for continue to support me. Your comment means so much to me. Stay safe and I hope to see you soon. ❤️
How much does it cost for net thanks
$13. Thanks for watching.
Thank you where can I find them
@@rodhartzell808 LP fishing supply at at Promar.
@@rodhartzell808 did you ever find the net I’m having hard time finding nets
Wear do you get the netting your other video said eBay but that is expensive
Get the promar replace the net from LP fishing supply. Very good price. Good luck.
@@Fishing247 can you attach the link I can’t find it
@@irishlove3905 www.lpfishingsupply.com/
@@irishlove3905 just sent you the link. Check the description for the link if RUclips does notallow the link in the comment.
I can’t find the nets. Is there a specific one you bought?
Where to get cheap rope for crabbing?
I look on the Amazon or sometimes I bought them at Ross store.
Thanks Thuy. I'll take 3 haha
Lol. 3 hoops will be on your way. 😁
Nice Thuy. You should start an Amazon affiliate account then post the parts of the Amazon items if there’s any Thuy. Make a little $ other than RUclips for donation etc… good improved hoop net
Thanks Darren. I am not very good with technology and will ask Moo to help me. Will be more money for the poors. Thanks for your supports brother. Stay safe.
Khéo lắm a trai. A hàn có bị đau mắt k?
Có em. Sao em biết?
@@Fishing247 e có từg bị😆
Bao nhiêu một cái dậy anh ơi..? em đặt 10 cái..^^
Haha. Em đừng có giỡn, anh gởi về thiệt đó.
I think you can made and sale it
Lol. I do not like money involved with my passions. Thanks for thinking of me. 😊
Can I order 5 😜😜😂🤣
You can't Moo. You have 6 hoops already 😁
@@Fishing247 😢😢🤣😂
I see potatoes on your eyes somewhere along your lines
I did not get it? 😁. Thanks for watching.
As a pipe welder it’s an at home remedy to put raw potato skins on your eyes when you burn them from welding with out proper eye protection
Sub a dub a dub dubbed !
Thanks. 😁
I'm cringing watching you used the grinder and welder!!! The grinder is probably one of the most dangerous power tool there is, that cutting disc can break and shatter sending broken sharp, high velocity shrapnel into your face , taking a eye out blinding you or opening up your face maybe both, you need to wear safety glasses and a face shield when using those power tools , safety 1st!!!! I don't want to see you injured or lose a eye, be smarter
Thanks brother for watching out for me. I will be more careful next time. Really appreciate your comment.