Controller presets and stompbox from Valenton GP100 with any midi controller

Поделиться
HTML-код
  • Опубликовано: 3 ноя 2024

Комментарии • 55

  • @danyvaldi5596
    @danyvaldi5596 Год назад +3

    How did you connect them??

  • @paulpeacevictor2327
    @paulpeacevictor2327 Месяц назад

    Sir how do u connect gp100 with midi controler can u show the connection thanks

  • @paulpeacevictor2327
    @paulpeacevictor2327 Месяц назад

    Sir can u show how to connect the unit and the midi controler

  • @simonfreiburghaus3068
    @simonfreiburghaus3068 Год назад

    Great video, thanx a lot🤟
    I connected my gp200 to a bluguitar amp1 iridium and i would like to send midi messages to the amp1 in order to change the amp channels. Amp1 listens on midi channel1. I set up the gp200 to send midi messages on midi channel 1, then on omni but the gp200 does not send any messages. Do you know how to set up the gp200 midi settings so that i can control any midi device listening on channel one? I spent a few hours to figure it out but unfortunately no luck😩
    Can you possibly help me to solve that problem?

  • @EzraBeltran
    @EzraBeltran Год назад

    Una pregunta donde lo compraste !? Mucha gracias

  • @meraproducer
    @meraproducer  2 года назад

    Sorry Guys, for stombox CC midi Start from CC48 till CC56, in the video say from 49, but the firts one is CC48.

  • @Peaceful_Days
    @Peaceful_Days Год назад

    It sucks they didn't bother to include midi control numbers in the manual like for GP-200 and we have to do it through trial and error.

  • @sap1ensrecord
    @sap1ensrecord Год назад

    Hello i'm using meloaudio commander and nux mg 300, I think that 2 units similiar to your gear on this video...
    Can you tell me how to setup?

  • @bedroomshow
    @bedroomshow 2 года назад +1

    Hello, i have a question: Can you use the chocolat controller to change the preset (A1- A2 - A3...) and use the stombox mode on the valeton gp100?

    • @meraproducer
      @meraproducer  2 года назад

      If u midi controller can send CC midi or PC midi, and u can setup the right messeger yes, can do it

  • @telecaster488
    @telecaster488 2 года назад +1

    Hello, a controller with a processor, connected via USB?

    • @meraproducer
      @meraproducer  2 года назад

      Both are connect to Mac or PC and there u routing the controller to the GP100

  • @sap1ensrecord
    @sap1ensrecord Год назад

    Is it possible without PC/Mac? i'm using micro USB to midi USB

  • @Peaceful_Days
    @Peaceful_Days Год назад

    Can I control the looper in GP-100 this way?

  • @sev3nthbandofficial706
    @sev3nthbandofficial706 2 года назад

    Hello my friend. May i ask if these will also work for mooer ge150?

    • @meraproducer
      @meraproducer  2 года назад

      To be honest i no have this pedal for try that, but u can try by u self, i think yes.

  • @Slavetskiy
    @Slavetskiy 2 года назад +1

    Btw, what type of cable you're using? Is it USB A to A?

    • @meraproducer
      @meraproducer  2 года назад

      no, i connect to mac or windows and there make a bridge. in this case i use MAC and MIDI PIPE.

    • @arnaudjayet225
      @arnaudjayet225 2 года назад

      @@meraproducer could you give more detail explanation how you connect the MIDI footswitch controller and Valeton GP-100 together please ?
      is the 5-DIN MIDI OUT of midi controller usless ?
      Does your connecting chain is :
      MP-100 MIDI controlleur ---- USB -----> your PC or Mac
      Valeton GP-100 ---- USB -----> your PC or Mac
      and the computer make a kind of bridge between MIDI controller and GP-100 so CC#/PC# MIDI commands from the MIDI controller goes to GP-100 and are routed by the computer ???
      No need to by a little USB Host box device like Kenton or MidiCommand ?
      thank you

    • @meraproducer
      @meraproducer  2 года назад +1

      @@arnaudjayet225 i plug both usb cable to my mac, in mac i have one software, "MIDIPIPE" and the i can make a bridge, this software also can apply many midi filters so u can send any PC or CC to Valenton GP10 from any midi controller. In this case no need usb-midi host, coz u plug all to the mac or pc, if u have one box like that no need mac or pc, just plug the MP 100 by midi din and valenton gp10 by usb and assing everything what u want a sent..

    • @arnaudjayet225
      @arnaudjayet225 2 года назад

      @@meraproducer thank you for your reply. How do you know the good CC#/PC# MIDI value for Valeton GP-100 do change preset (prev / text) or to toogle on/off a FX block (PRE,EQ, DIST, AMP,....) ? Do you have a list because there is nothing about MIDI commands in GP-100 manual.... Is there a way to discover GP-100 MIDI PC#/CC# Values with MIDPIPE ?

    • @meraproducer
      @meraproducer  2 года назад +1

      @@arnaudjayet225 did u see the tutorial? I say all cc midi and how change presets.

  • @jonathansantana3136
    @jonathansantana3136 2 года назад

    Tenho um chocolate Midi m-vave que uso com G1on, saberia me dizer se consigo usar ele na gp100 também?

    • @meraproducer
      @meraproducer  2 года назад

      if u midi controller can send PC midi and CC midi by usb or midi cable ofcourse can.

    • @jonathansantana3136
      @jonathansantana3136 2 года назад

      @@meraproducer acabei trocando minha g1on num ms50g estou tentando configurar mas ainda há um pouco de divuldade

    • @meraproducer
      @meraproducer  2 года назад

      @@jonathansantana3136 ohhh ok, good lucky brother, enjoy!!!

    • @jonathansantana3136
      @jonathansantana3136 2 года назад

      @@meraproducer vlw, muito obrigado Man! Boa sorte pra você também

  • @MarcosCosta-mn8gg
    @MarcosCosta-mn8gg 2 года назад

    Hello what PC commands should I send to change presets?

    • @meraproducer
      @meraproducer  2 года назад +1

      PC 001 - PRESET 1, PC 002 - PRESET 2 etc ...

  • @Davidmarquesnova
    @Davidmarquesnova 2 года назад +1

    Hi bro! Wanderfull tip! Can you teach step by step?

    • @feliperodriguezparedes2179
      @feliperodriguezparedes2179 2 года назад

      X2

    • @meraproducer
      @meraproducer  2 года назад

      Yes, u can connect the midi controller and GP100 to one midi USB host, or to mac or windows, in my case i use mac, in mac i used MIDIpipe, is one app for just routung my midi controller to GP100, and follow the steps in this video!! Cheers!!!

    • @meraproducer
      @meraproducer  2 года назад

      Sorry for answer very late!! But i was travel!

    • @Davidmarquesnova
      @Davidmarquesnova 2 года назад

      @@meraproducer tks man!

    • @IngenieroWorship
      @IngenieroWorship 11 месяцев назад

      Easy tutorial! Step by Step
      ruclips.net/video/ccDr8pyCUJc/видео.html&ab_channel=ConexionVerticalOficial

  • @ugegunara8328
    @ugegunara8328 2 года назад

    how do you connect the cable?

    • @meraproducer
      @meraproducer  2 года назад

      hi my friend, for connect like that u have 2 ways, u can plug to one usb-midi host box or just make a bridge in mac or windows, in this video i just connect the usb cable from GP 100 and from midi controller to my mac and in mac i make a bridge with one app call midi pipe, i routing midi controller in midi-outi and GP 100 midi-in is all, like that u can send any messenger to u GP100.

  • @kavtech_midi
    @kavtech_midi 2 года назад

    hi bro, so there only 9 stomp, that can be control? cc48 until cc56.

    • @meraproducer
      @meraproducer  2 года назад +1

      U have 9 stompbox for each preset, but u can put any fx in u preset, i mean u can control the 9 stompbox from u GP100, is the same for all presets

    • @kavtech_midi
      @kavtech_midi 2 года назад

      @@meraproducer so it's can change on or off even each preset has different stomp model? i mean example if in cc48, in the different preset, it's still can change on and off even different stomp model?

  • @Davidmarquesnova
    @Davidmarquesnova 2 года назад

    How is connected?

    • @meraproducer
      @meraproducer  2 года назад +1

      Hey!! U have 2 ways, if u have one midi usb host box, can do the bridge without mac or windows, if no, u have to use one app, for do the bridge and connect the GP100 with any midi controller, in this video i connect the midi footswitch and GP100 to my mac with Midi Pipe, and in input i route my footswitch for output GP100, this is how connect the mido controller to GP100, now just program the midi controller for presets and on off, with CC Midi and PC midi.

    • @Davidmarquesnova
      @Davidmarquesnova 2 года назад

      @@meraproducer hi Man, tks for answer, I apreciate this! So, after configure, how i connect boths to play? Usb? Sorry for so many questions

    • @meraproducer
      @meraproducer  2 года назад

      @@Davidmarquesnova my placer bro, u can see this tutorial, ruclips.net/video/RjV2VnWD3Js/видео.html there i explain and show how to do, any way if still need help let me know!! Cheers

    • @Davidmarquesnova
      @Davidmarquesnova 2 года назад

      @@meraproducer tks Man, u r the best!

  • @Slavetskiy
    @Slavetskiy 2 года назад

    When price for controller are same with device itself 😉

    • @meraproducer
      @meraproducer  2 года назад

      hehehe, this midi controller is very cheap like 80 USD, but like that u have better control from this small procesor and really this GP-100 is soo good for this money, u know what i mean!! cheers

  • @GilsonHenrique701
    @GilsonHenrique701 2 года назад

    Queria que ela controlasse a Valeton direto, sem precisar ligar no computador

    • @meraproducer
      @meraproducer  2 года назад +1

      U can do it with one MIDI USB host box

    • @reinaldosantosss
      @reinaldosantosss Год назад

      ​@@meraproducertem Como fazer uma com arduino?

  • @cesarin63
    @cesarin63 2 года назад +1

    Sube uno en español pariente

    • @IngenieroWorship
      @IngenieroWorship 11 месяцев назад

      Aqui esta el tutorial en español
      ruclips.net/video/ccDr8pyCUJc/видео.html&ab_channel=ConexionVerticalOficial

  • @crismusic3828
    @crismusic3828 2 года назад +1

    Hablas español?

    • @IngenieroWorship
      @IngenieroWorship 11 месяцев назад

      Aqui un tutorial en español
      ruclips.net/video/ccDr8pyCUJc/видео.html&ab_channel=ConexionVerticalOficial