Размер видео: 1280 X 720853 X 480640 X 360
Показать панель управления
Автовоспроизведение
Автоповтор
Is it necessary to pull out the engine for a top end rebuild? I'm about to start working on my 717 engine (1997 SeaDoo GTI)
Not necessary, some say it's easier
@@benbbuxton I completed this job over a year ago without pulling out the engine. Completely doable!
Sabastion blue crew will sort it he's on the case MICK O'TOOLE DUBLIN IRELAND 😁😁🇮🇪🇮🇪 I'm watching sitting at home off work better then TV more problems solved by the fire ball guys...😁😁😁🇮🇪🇮🇪🇮🇪🇮🇪
How do you get the head off if you snap one of the bolts??
iirc if the linkage fails on the oil pump arm, it defaults to wot.
Smart man
How much does it cost to rebuild an engine ?
needle bearing came from your piston.
Pat not the needle bearing it is ring stopper
Most likely a needle bearing from that bad wrist pin 📌
💪👍
I can tell by looking at those Pistons that is a fuel issue not oil
Exact same issue happened with my new one.... Exactly
New seadoo? Or new pistons?
@@Rekt-M8-v4 Pistons and valve cover, ez pz
@@CorollaGTSSRX that’s great! How old was your seadoo at the time? And how many hours when it happened?
Bearing alignment pin
What happened to these guys?
Возможно будет кому полезным. Занимаемся лазерной резкой. Наглядное видео процесса. ruclips.net/video/61S7SUXsoxY/видео.html
Popular consensus … if your shit oil injection failed and you ran it that way you cooked the engine … rebuild it new bypass that shit
those oil pumps never fail, if anything its the oil lines that would go but any 2 stroke rider knows the usual smoke their machine puts out.
Is it necessary to pull out the engine for a top end rebuild? I'm about to start working on my 717 engine (1997 SeaDoo GTI)
Not necessary, some say it's easier
@@benbbuxton I completed this job over a year ago without pulling out the engine. Completely doable!
Sabastion blue crew will sort it he's on the case MICK O'TOOLE DUBLIN IRELAND 😁😁🇮🇪🇮🇪 I'm watching sitting at home off work better then TV more problems solved by the fire ball guys...😁😁😁🇮🇪🇮🇪🇮🇪🇮🇪
How do you get the head off if you snap one of the bolts??
iirc if the linkage fails on the oil pump arm, it defaults to wot.
Smart man
How much does it cost to rebuild an engine ?
needle bearing came from your piston.
Pat not the needle bearing it is ring stopper
Most likely a needle bearing from that bad wrist pin 📌
💪👍
I can tell by looking at those Pistons that is a fuel issue not oil
Exact same issue happened with my new one.... Exactly
New seadoo? Or new pistons?
@@Rekt-M8-v4 Pistons and valve cover, ez pz
@@CorollaGTSSRX that’s great! How old was your seadoo at the time? And how many hours when it happened?
Bearing alignment pin
What happened to these guys?
Возможно будет кому полезным. Занимаемся лазерной резкой. Наглядное видео процесса. ruclips.net/video/61S7SUXsoxY/видео.html
Popular consensus … if your shit oil injection failed and you ran it that way you cooked the engine … rebuild it new bypass that shit
those oil pumps never fail, if anything its the oil lines that would go but any 2 stroke rider knows the usual smoke their machine puts out.