Robot ideas: 1 - turn signals 2 - speedometer 3 - odometer 4 - everse alert 5 - Make it sassy, maybe it insults you for being messy based off of how full the tray is 6- Make it polite. It apologizes every time it bumps into something.
I feel like a missed opertunity with the beer tracker is to give the holder a bottom that the can sits on rather than a friction fit. That way you're able to imbed the air tag in the base, eliminating the need for the bump on the side as well as doubling as a coaster.
Wont work just tried it....too flimsy because of the clearance unless i made it tall, not worth it....to much to print too aswell as interference from the can
Easy Solution: I live in Australia, we have these things called a "stubby holder" all you do is buy one you like, choose an area on it that's unimportant and stick on the air tag (counterparts for Android are also possible) Buy both from Amazon stick them together and you are done, enjoy
I see your point, but he's also monetizing people's ideas (which isn't bad, it's smart!). Constantly coming up with new ideas is exhausting for one person. But like he said, only a couple in one thousand are good. So giving them to the originator would probably increase quality ideas! (Also he should throw in a disclaimer, like for the beer invention 'Will not include airtag' that way it's not super costly to him.
@@brianaugarte5321 maybe he should charge people if they want it shipped. So he could earn a bit of cash since he did the hard work. But, anyway I guess you have a good point.
Home defense robot vacuum; if any burglars try to break into your home while the vacuum is awake, it’ll have an alarm and strobe light that go off, and some form of self defense, preferably of the pointy variety. Not only will it clean everyday spills and messes, and protect your home, but in the case of it catching an intruder, it’ll also clean up any blood, completely removing any trace of them.
Build a flag pole (put it on a spring/flexible rod so it doesn’t get stuck when it tries to go under something) on the vacuum robot so you can always identify where it is in the room so you can never loose sight of it! 🤣
I was going to say a similar thing except without the flag and I was going to say that it could be that way you always know where it is so you don't trip
For the robot, maybe make a vertical dock - something that picks the robot up and tilts it 90 degrees, alowing it to charge but also sitting flush against a wall so it takes up less space
Just started watching your videos recently. Didnt realize in lived in the little VT. I was standing outside your apartment 3 hours ago. Got lunch on the waterfront today.
A stylish garage for the vac. Maybe have an automatic rollup door with a sensor to open and close with flashing lights (like used on a utility truck). could have its own broadcast system... cleaning commencing in 1 minute.... The exterior could mimic the look of the building your are in with a light up "Unnecessary Invention" light up marquee sign.
You should make another confetti cannon for the roomba. At random intervals it would hunt you down and shoot you with confetti. The confetti gun would be on the top facing forwards kind of like a tank.
Invention idea: make the vacuum thing be a sort of “delivery robot” that could also be taller so you can reach it easier (Just imagine a tall on of those)
Look up restaurant delivery robot on your favourite chinese shopping site, they already exist. Although a vacuum version would be so much better as it could get up anything you dropnoff your plate
A usable unnecessary invention for the remotes would have been a remote "log" that allows the remotes to still have their IR emitter visible but keep all remotes attached to each other. No more slipping in the cushions
I'm not sure if I'm late, but why go looking for your beer? Attach a cupholder to the vacuum so when it comes around to you, you can pick it up and drink it (the beer...not the vacuum). Also, keep the airfinder on the cup holder so you'll know where both are, and will be prepared for it when it arrives.
Make the robot vacuum into a phone-taker-awayer! Add a retractable chord to it so that when it's nearby, you can pick your phone off the top and get your unhealthy dose of social media. But, when the vacuum is far enough away, the chord pulls the phone out of your hands, stopping you from getting too much screen time. Then the chord retracts, so your phone is dragged all over the studio. But there's another use; an exercise machine! You have to keep following the robot around so it doesn't pull the phone out of your hands, so you get to burn calories while you scroll twitter!
Invention idea: How about a lil robot elevator to fits along stairs so that the robo can clean on multiple floors instead of buying 2 or 3 of them. Or a drone-robo-vacuum delivery system, so it just flies down or up the stairs lol
7:20 this would actually be really useful for me being visually impaired as most remotes look similar now and it makes it difficult to differentiate between them from time to time.
#vacuumcleaner You should build a harness for your vacuum cleaner, to take it to outside walks and face band, so that it does not hurt outside world ground with cleaning. Also, you might build and small movable door below your main door, like for pets, to give your lovely vacuum a chance to walk outside, whenever it wants. Also, see some clothing for it, so it does not get too cold outside. Sometimes, if your house is clean, just to feed your vacuum petty, organize some kind of vessel to feed it with dirt, where you can spill or drop something intentionally and also garbage collector for you lovely petty vacuum…
I hate it when I just wake up and want to watch my iPad then my video or show ends and I have to get out of my really comfortable position to skip or pick a new movie/show/video
love your videos Matty. Here's my unnecessary idea. I'd like to have a device that cleans the inside of the windshield while I clean the outside of the windshield. Cleaning the inside windshield is awkward and literally back breaking. 👍
You could build a non spilling cup holder for your robo vacuum. I like the beer tag thing, but I think a beverage koozie with an air tag slot would be clutch!
For the Beer Tag would be cool if you made the band going around the can kind of like a snap bracelet, that comment having a friend at a festival sounds so smart. But if they finish their drink they can unsnap it from the beer and put it on their writs till they get another drink
Design the remotes like a restagular box with the 4 remotes at different sides, removable for battery changes and ofcourse color coded. This make it to take less space and also much more usable in our day today life
For the cordless vacuum make a place to put your camera so at any time you can check on it and if you can you could use those tracking things so you check where it is
Omg this would make the perfect gift for my dad who has always hated the universal remote I got for the living room and keeps using all the original remotes instead.
would be better to have a handle for the can, also, attach somewhere, like an arm or leg, maybe 2 positions, 1 a magnetic snap to your waist, 2 a chain on it holding it if you drop it but won't really disturb when it's full and you drinking it. but the best would be a small disk floating after you and the beer would be stabilized with a gyroscope on it, so it won't spill, and it would open and deactivate the stabilizers when you put it to your mouth.
Wouldn't a cooler for the can be better? Cans generally have a pocket at the bottom you could simply have the airtag inside that pocket. Then you're not only able to track you beer but also keep it cool :)
I can speak for all gamers: A mousemat with a built-in plastic punchable mini display (vertically) that you can reassemble after every break. This would be an easy calmint method to all the rage gamers who wants to punch through this display insted of the real one.
That scarf turned out less dumb than I expected. It felt like a weird request because there's already so many winter items designed to cover your face.
My new "smart" watch annoys me with reminders to stand up and move around. How about an invention that will give my watch some virtual exercise by letting it ride on the Roborock and maybe changing the watch's vertical height? And could you add a digital display (or audio) clock so I could see (or hear) the time while the Roborock moves around with the watch?
The BeerTag idea is awesome! But I think you could improve it by making it a beer koozie. It keeps the can cold by separating your own body heat and the can cold. They're usually made of foam neoprene or polyurethane, leather, neoprene, EVA, polyester, vinyl, and open-cell or closed-cell foams and provide great insulation. Then, you would have the pocket for the AirTag; you couldn't call it a Koozie for obvious reasons but I think BeerTag should be fine.
I think a better air tag for beer is to make an attachment for the bottom of the can where it has an inverted dome, and it sits there where it rests on the table under the can
Give the robo-roc arms that pretend to hold a non functional vacuum so it looks like the robo-roc is a robot actually using a vacuum instead of being a vacuum itself
3 things.... 1. You could have made the beer tags either into something that worked like a coaster where it held the air tags under the beer or you could have at least made a handle onto it, so it also functioned like a mug so you both keep your hands from getting cold and keep your beer cool by avoiding having to wrap your warm hand around it. 2. There is already something that works like a scarf that can also cover someone's face like a mask and it is called a balaclava 3. The remote thing is cool and everything, but what if your remote still relied on using IR lights to hit receivers? Would it be easy to pop them out if needed or what? Maybe it could have been made so that each remote could have faced away from one another with a little slot opened on each end so an IR emitter could shoot through the hole. Anyways I know I am super late with this, but still legit points, right?
The air socks sound like a recipe for disaster because think about it, a stalker could just slip this on somebody's feet without them knowing, and use the AirTags to track their location
Here in my country we hang birthday bunting to celebrate someone’s birthday. Since some ceilings are pretty high, maybe some kind of device that makes it easier to hang birthday decorations items to the ceiling / higher end of the wall
My suggestion for the roving robot: make a cover to go over (universal to fit most roving robots) the top that will create ramps on all sides that will go to a golf ball cup and flag on the top..The person would try to putt the golf ball to go up the ramp into the cup next to the flag on the moving rover robot..There needs to be holes in the ramps to allow vision for the sensors..That all could be printed by you for sure..You could use green for the ramp, white for the cup, and red for the flag as those colors are seen on the golf course a lot.. It it truly “Unnecessary “ for those that don’t use a roving robot or don’t like golf….The people that do find it necessary will even just “chip” the ball into the cup without using the ramp, making the ramp unnecessary to the pros..This “unnecessary “ product could really work to be cool! I could never do this, so it’s now ALL YOUR IDEA, from me…Can you just make cool products and sell without the patents ? Then people can just make new ideas and start selling until a letter shows up?
you could make this better by making room for a stubby/cozzie cooler to fit between the 3D print and can then have a hard plastic bottom where you could hide the AirTag underneath
Robot ideas:
1 - turn signals
2 - speedometer
3 - odometer
4 - everse alert
5 - Make it sassy, maybe it insults you for being messy based off of how full the tray is
6- Make it polite. It apologizes every time it bumps into something.
Very smart
Genius!
Genius
Sassy and polite, I vote for both.
So the opposite of the one Michael Reeves made?
I love how he couldn't decide if it was radius or diameter but it was actually the circumference
I feel like a missed opertunity with the beer tracker is to give the holder a bottom that the can sits on rather than a friction fit. That way you're able to imbed the air tag in the base, eliminating the need for the bump on the side as well as doubling as a coaster.
Thanks for saving me from having to say this as well. What they said!
I'm guessing this is more foolproof, the coaster you could leave behind if you're holding the beer, it sounds like a good idea though
Wont work just tried it....too flimsy because of the clearance unless i made it tall, not worth it....to much to print too aswell as interference from the can
Even easier, get one of those foam beer can holder that you get at events, put airtag inside with the can, bob's your uncle.
Easy Solution: I live in Australia, we have these things called a "stubby holder" all you do is buy one you like, choose an area on it that's unimportant and stick on the air tag (counterparts for Android are also possible)
Buy both from Amazon stick them together and you are done, enjoy
Dude this guy deserves 10m subscribers
Maybe to boost audience participation, you can ship the inventions you end up making to the person.
that's a good idea but it's also sorta enabling. I wouldn't want to ship anything to someone who told me to 'Fix.'
I see your point, but he's also monetizing people's ideas (which isn't bad, it's smart!). Constantly coming up with new ideas is exhausting for one person. But like he said, only a couple in one thousand are good. So giving them to the originator would probably increase quality ideas! (Also he should throw in a disclaimer, like for the beer invention 'Will not include airtag' that way it's not super costly to him.
It wouldn't work he would lose over 6$ per ship (adv) if you times that by how many inventions it can add up to over 30$
@@unstoppable3243 he make 100s of thousands every 4 months
@@brianaugarte5321 maybe he should charge people if they want it shipped. So he could earn a bit of cash since he did the hard work. But, anyway I guess you have a good point.
Home defense robot vacuum; if any burglars try to break into your home while the vacuum is awake, it’ll have an alarm and strobe light that go off, and some form of self defense, preferably of the pointy variety. Not only will it clean everyday spills and messes, and protect your home, but in the case of it catching an intruder, it’ll also clean up any blood, completely removing any trace of them.
Build a flag pole (put it on a spring/flexible rod so it doesn’t get stuck when it tries to go under something) on the vacuum robot so you can always identify where it is in the room so you can never loose sight of it! 🤣
I was going to say a similar thing except without the flag and I was going to say that it could be that way you always know where it is so you don't trip
That’s too useful
Put a version of yourself on top so it looks like someone is always home
@@Prince_of_Prussia-Bavaria painting color bevels on the roomba? (Flashy colors such as red, blue etc and not musou black, white etc.)
I think another one would be build a laser show on top of it, so you can switch off lights and play your trance with those lights.
Me just wishing he said “The Roborock S7, definitely not a useless invention.”
For the robot, maybe make a vertical dock - something that picks the robot up and tilts it 90 degrees, alowing it to charge but also sitting flush against a wall so it takes up less space
this is almost *too* necessary, though. don't ya think?
Just started watching your videos recently. Didnt realize in lived in the little VT. I was standing outside your apartment 3 hours ago. Got lunch on the waterfront today.
A stylish garage for the vac. Maybe have an automatic rollup door with a sensor to open and close with flashing lights (like used on a utility truck). could have its own broadcast system... cleaning commencing in 1 minute.... The exterior could mimic the look of the building your are in with a light up "Unnecessary Invention" light up marquee sign.
That would be cool
Yeah! It is really unnecessary! There is nothing, performing the parallel function. But the shelf does not seem to be as unnecessary.
For a good invention is like a glasses detector because I always forget where I keep them
You should make another confetti cannon for the roomba. At random intervals it would hunt you down and shoot you with confetti. The confetti gun would be on the top facing forwards kind of like a tank.
Arms for the robot to pick up your dropped coffee cups
As a 3D print artist myself I love seeing people take their creativity with their printer to their next level!
Invention Idea- make an attachment for a hat or shirt if possible with a fan built into the 3d printed attachment
The TV remote tray is genius... making one tomorrow.
You are so underrated what an amazing RUclipsr
Invention idea: make the vacuum thing be a sort of “delivery robot” that could also be taller so you can reach it easier
(Just imagine a tall on of those)
Look up restaurant delivery robot on your favourite chinese shopping site, they already exist. Although a vacuum version would be so much better as it could get up anything you dropnoff your plate
Idea for the robot:
Built in cat bed that pets your cat for you
A usable unnecessary invention for the remotes would have been a remote "log" that allows the remotes to still have their IR emitter visible but keep all remotes attached to each other. No more slipping in the cushions
Omg the remote holder may not be aesthetically pleasing but it’s a real problem solver
Roborock S7 Addon Idea: Pet food Dispenser To distract a pet away from the area of cleaning
Someone needs to make an unnecessary Invention Convention
For the awesome vacuum, make a dispenser that clips onto it to pour out a mess infront of it to make sure it always has a mess to clean
this is so unnecessary i love it
this is the best idea ever lol
That’s A+ unnecessary but such a good idea
I'm not sure if I'm late, but why go looking for your beer? Attach a cupholder to the vacuum so when it comes around to you, you can pick it up and drink it (the beer...not the vacuum). Also, keep the airfinder on the cup holder so you'll know where both are, and will be prepared for it when it arrives.
yes, i definitely thought you meant drink the vacuum
@@thatsme4303 I was afraid of that. I’m glad I specified. 😁
@@thatsme4303 ye so true brah and also how? How do you drink da vacuum unless breaking it
Make the robot vacuum into a phone-taker-awayer! Add a retractable chord to it so that when it's nearby, you can pick your phone off the top and get your unhealthy dose of social media. But, when the vacuum is far enough away, the chord pulls the phone out of your hands, stopping you from getting too much screen time. Then the chord retracts, so your phone is dragged all over the studio.
But there's another use; an exercise machine! You have to keep following the robot around so it doesn't pull the phone out of your hands, so you get to burn calories while you scroll twitter!
How did you only get 4 likes ?! This idea deserves more
Nice idea
Absolutely genius
WAW... makes lots of sense
Nerd
Should've made the beer tag holder into an insulated beer holder, coozy
For the Roborock S7 you should make a water gun that shoots coffee or any other liquid so that it always has something to clean up
Yes, this!
Masterpiece
Put a table on top and have it bring you different things.
2:29 the scarf is simply genius! In my mind I was thinking: how is he going to integrate the mask in the middle of the scarf?
Congratulation on 1 million sub!
Add a strange/scary voice to the vacuum robot so it can automatically say something at random times and end up scaring you..
YOUR INVENTIONS ARE LEGENDARY AND EPIC GLAD I FOUND YOUR CHANNEL
Invention idea: How about a lil robot elevator to fits along stairs so that the robo can clean on multiple floors instead of buying 2 or 3 of them. Or a drone-robo-vacuum delivery system, so it just flies down or up the stairs lol
hasn't somebody done this before
yup further research has revealed that peter Sripol is an expert in all things RC and flying has made a flying roomba
One sec, I'll find you a link
Edit: ruclips.net/video/wA2yIVFb2lI/видео.html
@@sammythewhammy69 holy shit, that's amazing lol
Matty:My mom taught me how to sow so thats useful
Also matty *Pulls out a sowing machine*
7:20 this would actually be really useful for me being visually impaired as most remotes look similar now and it makes it difficult to differentiate between them from time to time.
It should be a beer cozy with a place to have an AirTag
#vacuumcleaner
You should build a harness for your vacuum cleaner, to take it to outside walks and face band, so that it does not hurt outside world ground with cleaning.
Also, you might build and small movable door below your main door, like for pets, to give your lovely vacuum a chance to walk outside, whenever it wants. Also, see some clothing for it, so it does not get too cold outside.
Sometimes, if your house is clean, just to feed your vacuum petty, organize some kind of vessel to feed it with dirt, where you can spill or drop something intentionally and also garbage collector for you lovely petty vacuum…
I hate it when I just wake up and want to watch my iPad then my video or show ends and I have to get out of my really comfortable position to skip or pick a new movie/show/video
I love ur vids and you’ve gotten me kind of started building and i love it
@@rizqi6410 nobody asked
love your videos Matty. Here's my unnecessary idea. I'd like to have a device that cleans the inside of the windshield while I clean the outside of the windshield. Cleaning the inside windshield is awkward and literally back breaking. 👍
Idea: I keep loosing all of my 263 chargers. Make a thing where all of the chargers are one peace, and for extra security, add an AirTag.
Multi charging cables and charging 'squids' both exist
Man got everything
Attach a camera to the vacuum robot to film its daily life
the beer one: what about a cup where the can fits in and if you flip it up side down, the airtag has a compartment at the bottom
I would love to see the mask scarf idea with earmuffs!
Awesome video! 👏
You could build a non spilling cup holder for your robo vacuum.
I like the beer tag thing, but I think a beverage koozie with an air tag slot would be clutch!
A koozie would make it accessible to more types of drinks: cans, bottles, a glass
I have an invention for you. Pillow cup holder
For the Beer Tag would be cool if you made the band going around the can kind of like a snap bracelet, that comment having a friend at a festival sounds so smart. But if they finish their drink they can unsnap it from the beer and put it on their writs till they get another drink
great idea
Design the remotes like a restagular box with the 4 remotes at different sides, removable for battery changes and ofcourse color coded.
This make it to take less space and also much more usable in our day today life
For the cordless vacuum make a place to put your camera so at any time you can check on it and if you can you could use those tracking things so you check where it is
I love this guy he's so creative💖
Make a shoe where the bottom part can come off just for when that little rock is in your shoe
robot ideas
1- cup holder
2- arms
I made a remote caddy 15 years ago from red oak and 3m superlock Velcro. Works a treat
Omg this would make the perfect gift for my dad who has always hated the universal remote I got for the living room and keeps using all the original remotes instead.
I'm British so when he said it was 25 degrees outside and there was snow I was so shocked then I realised he lives in america
You need to add eyes on the vacuum
would be better to have a handle for the can, also, attach somewhere, like an arm or leg, maybe 2 positions, 1 a magnetic snap to your waist, 2 a chain on it holding it if you drop it but won't really disturb when it's full and you drinking it. but the best would be a small disk floating after you and the beer would be stabilized with a gyroscope on it, so it won't spill, and it would open and deactivate the stabilizers when you put it to your mouth.
That first one is cool, but it wont fit in my car cupholder
Wouldn't a cooler for the can be better? Cans generally have a pocket at the bottom you could simply have the airtag inside that pocket. Then you're not only able to track you beer but also keep it cool :)
Yea, all you need is a tag and a koozy
I can speak for all gamers: A mousemat with a built-in plastic punchable mini display (vertically) that you can reassemble after every break. This would be an easy calmint method to all the rage gamers who wants to punch through this display insted of the real one.
You should make a puzzle piece 🧩 on the jigsaw table for the remote holder
"Very scientifically measured out the elastic" 😂
That scarf turned out less dumb than I expected. It felt like a weird request because there's already so many winter items designed to cover your face.
Holy shit!!! That's how you're supposed to loop a scarf? GENIUS!!
Just found the channel, so awesome!!!
You should make a tissue box/tissue launcher for when you need a tissue
Roborock s7 idea: Maybe make put a place to put a camera and a tracker on the robot.
Hey Matty, u could build a spoon that scoops up ice cream for u 😊
Bonus points for having fabric shears
Vacuum needs a tiny cape
My new "smart" watch annoys me with reminders to stand up and move around. How about an invention that will give my watch some virtual exercise by letting it ride on the Roborock and maybe changing the watch's vertical height? And could you add a digital display (or audio) clock so I could see (or hear) the time while the Roborock moves around with the watch?
A timer that slaps you after a certain time
Or when you put the beer coaster on your friends beer and your friend takes his beer inside you show security that you “lost” your phone
I think the robot should have an air freshener, so it makes the whole studio smelling good.
The BeerTag idea is awesome! But I think you could improve it by making it a beer koozie. It keeps the can cold by separating your own body heat and the can cold. They're usually made of foam neoprene or polyurethane, leather, neoprene, EVA, polyester, vinyl, and open-cell or closed-cell foams and provide great insulation. Then, you would have the pocket for the AirTag; you couldn't call it a Koozie for obvious reasons but I think BeerTag should be fine.
I think a better air tag for beer is to make an attachment for the bottom of the can where it has an inverted dome, and it sits there where it rests on the table under the can
Give the robo-roc arms that pretend to hold a non functional vacuum so it looks like the robo-roc is a robot actually using a vacuum instead of being a vacuum itself
I think a picture frame with a level built into it with a cover ( a hole in the picture frame) would be the perfect invention
3 things....
1. You could have made the beer tags either into something that worked like a coaster where it held the air tags under the beer or you could have at least made a handle onto it, so it also functioned like a mug so you both keep your hands from getting cold and keep your beer cool by avoiding having to wrap your warm hand around it.
2. There is already something that works like a scarf that can also cover someone's face like a mask and it is called a balaclava
3. The remote thing is cool and everything, but what if your remote still relied on using IR lights to hit receivers? Would it be easy to pop them out if needed or what? Maybe it could have been made so that each remote could have faced away from one another with a little slot opened on each end so an IR emitter could shoot through the hole.
Anyways I know I am super late with this, but still legit points, right?
Robot idea: Make it a house/bed to charge in instead of just the normal charger
The vacuum obviously needs a speaker so that it can play motivational music for itself and stay motivated
The air socks sound like a recipe for disaster because think about it, a stalker could just slip this on somebody's feet without them knowing, and use the AirTags to track their location
I watch these before bed because it’s cool
What about portable kitchen to bring everywhere you go
When i watch you I get ideas for invention
Here in my country we hang birthday bunting to celebrate someone’s birthday. Since some ceilings are pretty high, maybe some kind of device that makes it easier to hang birthday decorations items to the ceiling / higher end of the wall
My suggestion for the roving robot: make a cover to go over (universal to fit most roving robots) the top that will create ramps on all sides that will go to a golf ball cup and flag on the top..The person would try to putt the golf ball to go up the ramp into the cup next to the flag on the moving rover robot..There needs to be holes in the ramps to allow vision for the sensors..That all could be printed by you for sure..You could use green for the ramp, white for the cup, and red for the flag as those colors are seen on the golf course a lot..
It it truly “Unnecessary “ for those that don’t use a roving robot or don’t like golf….The people that do find it necessary will even just “chip” the ball into the cup without using the ramp, making the ramp unnecessary to the pros..This “unnecessary “ product could really work to be cool!
I could never do this, so it’s now ALL YOUR IDEA, from me…Can you just make cool products and sell without the patents ? Then people can just make new ideas and start selling until a letter shows up?
Self-defense mechanism for the robot
For the beer tag you should make it where you can open it up and put it on your ankle. Real life dream manhunt
5:18 Sponsor Add On:
Drink holder! Ever want a drink, only every now and then? Introducing: The robo cooler! Now it's a mop AND it holds your drinks!
Robodock addon idea: give it solar panels and wind turbines but only use it indoors
I'm super late but you should put like a fancy hat that also serves as a beverage grabber
Make a cat basket on top of the cleaning robot 🤖😄
I need to know when my tea is ready to drink
you could make this better by making room for a stubby/cozzie cooler to fit between the 3D print and can then have a hard plastic bottom where you could hide the AirTag underneath
Remote idea- Mega Remote, basically a stick with 4 sides which you can attach remotes to and switch between, use all the remotes at once.
A banana that holds candy