COLD STEEL MAY HAVE LOST THEIR MINDS
HTML-код
- Опубликовано: 8 сен 2024
- WOW!! THIS IS A BEAST | COLD STEEL MAY HAVE LOST THEIR MINDS- This is probably the craziest knife that I have seen from cold steel and I love it. This is probably;y one of the coolest outdoor every day carry knives on the market ... if you are looking for a bad a** bowie knife then you need to look this one up, you can find it here- shrsl.com/46mz4
#coldsteel #coldsteelknives #edc #edcknife
CHECK OUT THIS VIDEO SPONSORS:
COFFEE BRAND COFFEE, SAVE 5%- coffeebrandcof...
TEMPERED TRAIL- temperedtrail....?sca_ref=3490368.HyUVk2Ludg
SHOP MY AMAZON STORE TO SUPPOR THE CHANNEL- www.amazon.com...
#spyderco #knifecollection #knife
Great every day carry knife options that can be picked up at these vendors: KNIVES SHIP FREE- shareasale.com...
BLADE HQ- shareasale.com...
GP KNIVES- shareasale.com...
WE KNIFE CO/CIVIVI- shareasale.com...
ARTISAN CUTLERY/CJRB- shareasale.com...
VOSTEED KNIVES- shareasale.com...
So any of the knives you're searching for can probably be found at BladeHQ, use my link - shareasale.com...
To get access to exclusive content and giveaways, click the link below
/ @crazysharp
guys please also follow mw on my alt-tech channels over at:
rumble- rumble.com/c/c...
Full30- www.full30.com...
please Visit the GoFundMe me I set up for my daughter's skating season -gofund.me/4b61... even if you. Cannot donate please share it as much as possible.
...for sharpening services or refinishing call or text 619-254-9401, you can also email gunmonkey1974@gmail.com but a call would be best.
SOG knives has provided us with an affiliate link so please go check out their offerings- alink.to/gVFLxl
use my Olight link to get great deals on lights- shareasale.com...
survival frog- shareasale.com...
Recomended EDC knives-
sea snake- amzn.to/3y3UEbU
coated black sea snake- amzn.to/3eSzKVC
QSP Penguin- amzn.to/3zGH12z
Artisan Arroyo- amzn.to/3l0cXuS
FFKW Gent- amzn.to/3iNQ0s1
FFKW Crux- amzn.to/372nAoO
FFKW Prolix- amzn.to/2VfaSR2
FFKW Buc- amzn.to/3eY7DEG
CJRB Crag- amzn.to/2VJ7PAK
CJRB Maileah- amzn.to/3ACBnPM
Here is a list of items i use for cleaning and repair-
blue loctite stick- amzn.to/3wXhD7a
torx bits- amzn.to/3x2XSeq
remoil- amzn.to/3x6oefs
hemostats- amzn.to/3kTZu7F
Electronics swabs- amzn.to/3BUQrcK
short handle1/4 inch bit driver - amzn.to/36Wwyns
long handle 1/4 inch bit driver- amzn.to/3zxxB9K
Jeweler' screw drivers- amzn.to/3BVLL6A
scratch brush set- amzn.to/3eULbfz
fluorinated grease- amzn.to/3rF2ypJ
KPL- amzn.to/3BDKJvN
hexdriver tool set- amzn.to/3BG5ffd
diamond file set- amzn.to/2WjFRvJ
soft side knife case- amzn.to/3kYpxLj
drill press converter- amzn.to/3BKvn8N
Stones for beginners-
1000/6000 grit combo- amzn.to/3kNB0x4
600/2000 grit combo- amzn.to/2WhI2Qt
lapping stone for flattening- amzn.to/3fCtZvx
Advanced sharpening stones-
shapton 8000grit- amzn.to/3x2sYTA
shapton 10,000 grit- amzn.to/3x52YXo
shapton 12,000 grit- amzn.to/3kWmaUW
spyderco fine ceramic- amzn.to/3i0ESsx
spyderco ultra fine ceramic- amzn.to/3BBac9h
![ARGENTINA vs. CHILE [3-0] | RESUMEN | ELIMINATORIAS SUDAMERICANAS | FECHA 7](http://i.ytimg.com/vi/De3AWmXzhuA/mqdefault.jpg)
Purchase link-shrsl.com/46mz4
Hi, I didn't see the link for who makes those awesome sheaths! Thanks & great video
Over the top and going too far is why Cold Steel is so damn LEGEND
⚔️👍🇺🇸
The Cold Steel Recon Scout 3V looks really sturdy 👍 A real monster is the Cold Steel Gurkha Kukri Plus 3V, a huge piece of thick CPM 3V 😮
Thanks for your content. I'm a big cold steel fan boy but all of my knives are from last century, American made out of Carbon V steel. I have serious doubts that the newer knives are better, if as good as the originals. Would love somebody to do comparisons of original Carbon V blades vs the San Mai or CPM 3V.... are you that guy? ;)
so when you say over the top are you referring to the price?
I bet he doesn't know what he's talking about ,just wants to criticize a good knife because he can and it's an outdoors survival/ combat knife and more of a combat knife ,the trail master is a better camp knife.
😎
I have a late 90’s RS in Carbon V. It’s a second I bought directly from Cold Steel. Awesome knife for bumming around in the woods.
The Recon STOUT
Lol.., bingo
In my subjective opinion 3V is the ideal knife steel. It is hard, and tough, but not to the point that it can not be sharpened with diamond stones. In addition it is stain resistant, but not stainless.
Yes it is a PITA to work with but the finished product is great.
This is why I think more 3V knives are a good thing.
🤮.... I've spent many years of my life with so many knives. From budget to custom level expensive...well, at least for me. I'm talking upwards of $600 blades.... 😳 (young Marine with my first real expendable cash)
Sold them all. End of the day, older I get, all I want is some lowly, cheap 1095, 5160, etc that is expertly heat treated and I can use and beat on for the rest of my life without fail.
I don't give a hoot anymore about these "Super steels." Just give me a solidly forged blade in a cheap and reliable steel. Don't care about rust and upkeep. Easy field sharpening. Not overly expensive. I'm a happy camper.
I've been feeding my Nepalese made khukuri addiction lately. Cheap 5160 spring steel. Differentially heat treated. Convex edges. Hand forged by master blade smiths. A lifetime of chopping and thumping where the handle will wear out long before the blade. Just make a new handle and off to the field again.
desert storm, remember? this is a fightinh utility back then.
Im shocked at how well this video did for a fixed blade wow.
I’ve made a custom leather stacked handle on a couple of these.
If you do get to do some testing, i would like to see how well you can choke up on the blade for more precise cutting since it has a guard.
0.30" is just under 5/16" and just over 7.5mm, which is consistent with at least the very old Recon Scout in Carbon V (~1095 CroVan).
The more I look at that the more oddly familiar it looked, mainly in the blade, the way the satin finish came out, the 'not sharpened' false edge that's sharp as an ax, the more it reminds me of the Spyderco Darn Dao. Like they were done in the same shop!
And now I'm sad my Darn Dao isn't in 3V, because that would be ideal for it
Short trail master
The overgrind is even more intense on my 3v trailmaster. Its something I usually cannot live with, but on these, they are so heavy to begin with that a smaller knife isn't so bad. This might also mean that the blade is narrower and shorter than its supposed to be if its overground consistently all the way around
$300+ for any rubber-handled knife from anyone is a big fat “No” for me. The rubber handles wear, melt, get cut or otherwise damaged AND they’re not easily replaced like a regular slab style.
Dont get me wrong, I love CS blades at the sub-$150 price range (my 3v SRK for example).. they’re hard working knives that are tossed in the bottom of a toolbox when the handle is completely shagged… but any $300+ knife should have heirloom potential, and this one doesn’t with its irreplaceable handle.
In this category and style, look to the ZT 0006
I think ur wrong. I have one. This is a great, well balanced Hell'a Bowie.
I’ve carried a knife since I was eight years old. That was 1967. Been collecting, and using knives (fixed blades) since 1977.
I had a Recon Scout in 2004 and loved it. Gave it to a friend of mine when she got married, but haven’t replaced it yet.
Perhaps it’s too late now. I don’t remember it being that thick, maybe 3/16ths.
In my humble opinion, 0.3 inches is too thick. It is completely unnecessary. One quarter inch is pushing it, although my favorite knife of all time is 1/4 inch thick (TOPS Armageddon).
3/8ths is plenty strong enough for anything you need to do with a knife.
I suppose the full flat grind helps keep it from being too unwieldy (is that even a word? lol)
Yes it is!
I had the original Carbon V and it was 5/16" thick. I didn't like the handle being narrow in the middle where my hand is the widest.
A bumper off of a Buick? Never heard a blade described like that! 😂Can’t beat General Motors, can’t beat Cold Steel!
I like alliteration… It was either a bumper off of Buick or a Ranch Hand of a ram charger
What a beast thanks for video Mike
Looks awesome, I just wish CS would make all their popular fixed blades in good midrange steel like AUS10A. Alot of them you can only get in San Mai and 3V which i like, but SK5 I'm not a fan of.
The thickness is 5/16" thick just like it always has been. So has the Trailmaster.
Hi there,
I have a Trail Master, and looking at that knife, and listening to your comments about it, I must say I'm disappointed about that knife.
The fit & finish is not even close to that of my TM!
Where is that blade actually manufactured? I don't recall your mentioning that.
My TM is the San Mai III version made in Japan.
Taiwan
Their prices are way too proud these days. I was able to find a lightly used carbon recon scout on ebay last year but they are very hard to find and command a high price now. Cold Steel, or whoever owns the company now, should realize they would sell a lot more of these if they didn't price them at $300+ and came out with good versions priced similarly to their SRK line.
Agreed!!! 😄👍🇦🇺
Securex is not kydex its glass filled nylon(fiberglass impregnated) that's why it's doing that kydex doesnt
I know… I corrected myself and said it was not Kydex … And Kydex will absolutely scratch the blade
A blade thickness of 5mm would have been plenty enough.
I don't understand why knife makers would make their knives so unnecessarily chunky.
That's twice as thick,as it should have been. That's a shame,because it's a nice design knife.
I’m gonna disagree because having done some testing since I filmed this a little over a week ago… It definitely still does cut very well
That’s a thick one!
Good morning . I ♥️ Saturday mornings around here . Every Saturday the girls make a really nice pancake , eggs , sausage or bacon , home fries breakfast and then we all do what have to or nothing at all . Today is feeling like a wake and bake with some fresh Biscotti .
Random :-/
Wow
Dam
The thickness should definitely help in chopping, and “batoning”. I like sledges for aesthetic design, and balance, and even back cutting when sharpened. However it might be better with a flat spine, for “batoning.” Back in late ‘80s I was going to replace a SRK handle,with a wood one, lo and behold, an F.g Rat tail tang. The same year I experienced my Recon Scout braking at the blade/tang area. POS design and possibly forging! As much as I have enjoyed many CS knives and accessories, I have to speak to my Falkniven A1 being fantastic. A definite step up in every way. After decades of CS knives. I don’t think I’ll buy another. You can tell the the generation of these knives by the sheath. I never did check out the tang on my First Edition Tanto Sanmai, (with brass guard and brass end cap.) I had it since 1980 and eventually sold it to a buddy. I still use my CS Recon Tanto though. I have abused it as much as any other knife I have had in the field but for some reason it’s still going strong, take a beautiful hair shaving edge and still secure in my old/cracked “leather sheath.”
It just looks like the way things are supposed to be made.
THANK YOU!!!! Often, I will be watching a review and, halfway through, the reviewer will mention how great the "Secure X" sheath is. At that point, everything else they said becomes sus because - Water is wet, women lie, and Cold Steel sheaths are dog shit. These are just basic truths we all KNOW. I really like CS fixed blades. The Recon Scout in 3V will most likely be my next (sucker for Old West Nostalgia). I appreciate you showing the grind "oops" which - that knife is too expensive to be ok with that, he should have asked for a replacement. A Warcraft? Sure, wtvr. Once you near the 300 mark, expectations need to be met. And THANK YOU for not trying to go ez on CS about their ridiculous sheaths. They're as BUNK as Glock's plastic sights 👎 Good honest video!
I hope Cold Steel start making new versions next year in CPM Magnacut steel.
The Recon Scout is supposed
to be subdued, and not polished and shiny
Shame that L.T. isn't the captain at Cold Steel any more
The knife is totally cool 😎 although not great for opening letters 🤘
That's to help with penitration all good knives are like that
"...a bumper off Buick..." you're showin' your age...
I like alliteration… It was either a bumper off a Buick… Or a ranchhand off a ram charger
...makes two of us for alliteration, my friend...also a big Cold Steel fan...@@CrazySharp
If it’s full tang, cpm3v I don’t think so. It’s an outdoor knife. I’m a SpyderHoe , don’t have any cold steel knives 🤷♂️👍🏻
Full half inch lmao. If you like that get yourself a 3V Trailmaster 😉
Half inch. 12.7mm. I don't think so!!.
😂 They have lost their minds. That's not a $329 knife.
In a community of people that routinely buy $700 knives… $329 is not even a drop in the bucket. I do know that there are a lot of people that really would never spend that much for a knife… But I currently own at least two knives that are over $1000 each. That’s not a flex it’s just a statement of fact… Guys who are into watches will spend several thousand dollars in a pop… There’s also a entire group of people that will spend $700 on an ink pen. It just depends on how much you want to spend on your hobby
@@CrazySharp I'm talking about the $ vs what you are getting. I own knives that cost $600ish. Bout my limit for blades. Firearms on the other hand lol. It's kind of like the Benchmade Narrows. Not that extreme but still.
I thought you were going to tell us about the sheath and where we could get it.
I forgot… it will get it’s own video
Bummer for the scrapes on both sides of the face
I wish they would also make it in a simpler steel so us peasants could afford it.
When he sold the company to big corporate i walked away.
Yes I'm sure this thing must be a Full 1/2" thick 3V....ooooh wait... calipers say .30 hmmm
I said I think and it looks like
Paying HOW MUCH for a bad grind?😂😂😂
I only see pros
Well some dudes like cold steel. Whit that money 395 euros here I go more to bark river, fallkniven, busse or something else. In the end it comes to do you like more pepsi or cocacola.. Both are bad for you don't drink that shit.
Well you told us what you didn’t have to show us- unboxing. You told us what you are not going to show us- outdoor demonstration in the desert. You showed us a sheath and told us you were going to talk about it in another video. You made two more videos and neither of them are about the sheath. You said it’s over the top- but that just seems to be click bait as you don’t say why. It’s 1/3 “ much like the trail master and other cold steel bowies. So, I am doubtful that I will watch again. I’ll look for some information elsewhere. This was pretty much a waste of time.
So this is a first impressions video… I have not filmed the other videos yet. I don’t know if you know how this works but that’s typically the way I do stuff on my channel. I get the knife and I do unboxing and first impressions… Then there is a use period where then I review the Knife.
You seem quite impatient when I specifically say in the video that I have to speak to the owner of the Knife to find out how much actual use I can do for a review. If you don’t want to follow … fine. I’m not changing the way I do my review process so maybe it’s not a good fit but it’s absolutely not Clickbait
And as far as why it’s over the top… It’s .3 inches of 3V steal the entire intro of the video was tongue in cheek I refer to it as a bumper off of a Buick. So basically what I’m reading here is that you didn’t watch the video