What. 43 pounds? It weighs close to 90 pounds my friend. This is very heavy subwoofer and in fact there are wheels specially made for them to easily move around.
You can plug a power amp into the 18" 8 ohm sub then go out to the 15'' 8 ohm speaker with horn to give you a 4 ohm parallel connection to increase your output wattage.
Except that this is a 4-ohm speaker, so when wired in parallel with an 8-ohm speaker, the resulting impedance is under 3 ohms. Unless your amp is 2-ohm stable, the resulting load could easily damage your amplifier.
Disculpa cómo puedo lograr lo que mencionas de configurarlo de tal forma que salgan las frecuencias bajas solamente por ejemplo al microfonear el kick de la batería y que se sienta en el pecho así como tú dices, he tenido esa sensación en concierto y en lugares y yo compre dos JRX215 y el sub JRX218S que muestras en el video pero yo lo uso con una mixer amplificada, ¿pero entonces debo de comprar amplificador y corsover y mixer por separado? Me gustaría lograr un buen sonido tengo una banda y normalmente conectamos micrófonos para la voz, un sintetizador, guitarra electroacustica, y el micrófono que uso para el amp de la guitarra eléctrica, y los micrófonos de la batería, el bajo eléctrico lo mando al subwoffer y el kick de la batería también pero no logro buen sonido , ¿que puedo hacer?
yes, let's check. Subwoofer "below bass frequencies"... no, sorry; the subwoofer handles the bass frequencies exactly. The speaker cable he showed looks more like an instrument cable... the connector might be the same, but an instrument cable likely can't handle the current that this speaker is rated for. The jack is a speakON connector, invented by Neutrik but it's not named Neutrik. There is no crossover on a cabinet with a single speaker; I think he meant that what it doesn't have is a built-in low-pass filter. And it's not that the mids and highs don't sound good--it's that they don't get reproduced, since they are above the frequency range for this speaker. This sub weighs 71 pounds, not 43. Rated 250W RMS, frequency range 34-250Hz. The two connectors are not both inputs; the one on the right is a thru jack, for powering another speaker in parallel.
What. 43 pounds? It weighs close to 90 pounds my friend. This is very heavy subwoofer and in fact there are wheels specially made for them to easily move around.
what specific driver model does it use?
You can plug a power amp into the 18" 8 ohm sub then go out to the 15'' 8 ohm speaker with horn to give you a 4 ohm parallel connection to increase your output wattage.
You never ever do such a thing..
Except that this is a 4-ohm speaker, so when wired in parallel with an 8-ohm speaker, the resulting impedance is under 3 ohms. Unless your amp is 2-ohm stable, the resulting load could easily damage your amplifier.
Do they have many many bass?🔊
Disculpa cómo puedo lograr lo que mencionas de configurarlo de tal forma que salgan las frecuencias bajas solamente por ejemplo al microfonear el kick de la batería y que se sienta en el pecho así como tú dices, he tenido esa sensación en concierto y en lugares y yo compre dos JRX215 y el sub JRX218S que muestras en el video pero yo lo uso con una mixer amplificada, ¿pero entonces debo de comprar amplificador y corsover y mixer por separado? Me gustaría lograr un buen sonido tengo una banda y normalmente conectamos micrófonos para la voz, un sintetizador, guitarra electroacustica, y el micrófono que uso para el amp de la guitarra eléctrica, y los micrófonos de la batería, el bajo eléctrico lo mando al subwoffer y el kick de la batería también pero no logro buen sonido , ¿que puedo hacer?
Lo que pueses hacer es panear medios en un canal y sub en otro y por canal paneas
Muy bien primo 👍
Wow... You have no clue what you're talking about, sir....
For real, it was painful I stopped halfway.
yes, let's check. Subwoofer "below bass frequencies"... no, sorry; the subwoofer handles the bass frequencies exactly. The speaker cable he showed looks more like an instrument cable... the connector might be the same, but an instrument cable likely can't handle the current that this speaker is rated for. The jack is a speakON connector, invented by Neutrik but it's not named Neutrik. There is no crossover on a cabinet with a single speaker; I think he meant that what it doesn't have is a built-in low-pass filter. And it's not that the mids and highs don't sound good--it's that they don't get reproduced, since they are above the frequency range for this speaker. This sub weighs 71 pounds, not 43. Rated 250W RMS, frequency range 34-250Hz. The two connectors are not both inputs; the one on the right is a thru jack, for powering another speaker in parallel.
how to connect 2 jbl jrx212 to a single jbl jrx 218 subwofer and then connect everything to an amplifier?
That will create a 2 ohm connection which might damage the power amp.
What is crossover ?
300hz like almost evers sub
@@deanwekking7430 sorry i didn't get you .
No stranger to Deez nutz
price kya hai bhaiya subwoofer ka...,,...
Tu dis vraiment n’importe quoi..! 🤷♂️