Thanks for the video. I am that 80 year old fart you were referring to in your video. I could not push the handle back for reverse on my John Deere D105. When I saw your video a light bulb lit up in my brain. I got a long screw driver and my heavy duty blower and took out tons of debris a well as those needle balls from the transmission area. I did this without taking anything apart. The handle now moves smoothly in all direction. Brother, you saved a retired old man alot of money. I sent you some cash so that you can get a cup of coffee on me! Greatly appreciate your generosity, God Bless you!
I absolutely loved this video!! The best thing about the channel is that I can learn and it's free! God has blessed you with quite a gift brother. Great video. I cut 20 lawns while listening to this 🤣🤣👊💯
Thanks! I am that 80 year old retired old man you were referrring to in your video. I could not place handle in reverse. I saw all the debris you cleaned out and a light bulb lit up in my head. All I did was use a long screw driver and a heavy duty blower and did the cleaning without removing anything! The handle now goes in reverse and is smooth in all directions. Brother you saved me alot of money. God Bless you!!
I'm sure you grow tired of all the nice comments and praise and stuff, but you just saved me a lot of money. With labor so high these days, it's like there's no such thing a small labor bill...and how much can you spend fixing a thousand dollar mower. Thanks again. It was actually fun!!!
Tom to start a dedicated John deere repair shop! He has impressed John deere so much they have decided to change the branding to Tom deere running off a Doby straton engine. 😅
Toooom Doooobyyyy! Nice work, Tom! I switched out a trans on an MTD Yard Machine a number of years back. First I ever did. Had a blast! Thanks for sharing this fun video! God bless.
It amazes me how this could be designed to fail like this with it being open to air but not being easily cleaned. I believe I have this same problem with my Husqvarna.
I ended up with this job also. An E100 with so little time on it, the rear tires still have that extra, thin rubber on the center of the tread. Tks for this video, it made my day much better and easier! This guy also went out to buy another mower. He told me to scrap it if I couldn't fix it,
After I got it back together, I saw it had 4 hours only on it! I just can't get over someone buying a JD for all the money and getting a plastic transmission.
I have a Craftsman 42 inch tractor with one of those plastic transmissions. After about 8 years of cutting my lawn, and the neighbors front yard, I noticed it was getting hard to shift. I took out the battery and battery box to see what was going on, and sure enough, the top of the transmission was covered with millions of pieces of grass clippings. I thought I could just take a vacuum and suck out the dead grass in a minute or two, and soon be finished. Nope. The grass was packed down in between the plastic ribs molded into the transmission so tightly, that the vacuum couldn't get much of it out. It was as if it had been glued down in there. I had to spend at least 45 minutes breaking up the chunks with a screwdriver and sucking out the pieces with the vacuum. As fate would have it, there is just enough stuff in the way that getting the vacuum hose all the way down into the fins is impossible. Trust me, it can't be done. Unless you take the transmission out, you need to dig the grass out with something metal to get the vacuum hose close enough to suck the grass chunks out. How that grass gets up inside there and packs that hard is amazing, but it does. That was one time I missed my 240 volt air compressor that Hurricane Katrina ruined. After all of that cleaning ordeal, I thought that I could forget about it for years, but no such luck. Last year it started acting up again. This time I caught it early, so breaking the grass loose was a lot easier. For those transmissions, cleaning the top is a regular maintenance item. Thankfully, that expensive short drive belt on them lasts for decades in residential use. When changing the grease seals on those transmissions, you want to go around the grease seals with gasket sealer, because even the new ones have a tendency to leak around the outer edge that goes into the transmission. Those transmissions are packed full of thick grease, so if a little oil is lost, you can ignore it. Just change the axle seals and forget about it.
I would have stripped all the holes out in that plastic housing using the impact gun. I have a John Deere and I like it; I bought it last year; I am 67 and was cutting about 1 Acre with a push mower. Thank you for the content you share.
Great video!! I was at my camp with limited tools. Took off wheels loosened the debris and blew out both sides with the leaf blower after working the handle it freed up and worked.
Great Video ** Stop ** Before dropping transmission ** I fixed mine yesterday, stuck in forward for over 3 months. I used a Habor Freight Central Pneumatic 150 psi compressor with a HF Merlin 90 psi blow gun kit 64149. I placed the longest probe in the Merlin kit into each of the metal slots / holes around the transmission along with following the shifter lever and it blew 4 dust pans of wood chips and crap off the transmission. Shifts like it's brand new !!!
I had to laugh when you mention about being 80 yrs old...well I am 77 and tho I love to work on machinery, just can't do things like this anymore. This is a excellent video, was just wondering if there is a adjust on one of the rods for the belt? Mine is hard to get moving in reverse, have to press really hard on pedal to make it move, also same with the forward.
Great video, thank you!! I got it tore a part but had a piece of plastic causing trouble. Can I send you a couple pics for your advice somehow? Thanks!
Thanks for the video. I am that 80 year old fart you were referring to in your video. I could not push the handle back for reverse on my John Deere D105. When I saw your video a light bulb lit up in my brain. I got a long screw driver and my heavy duty blower and took out tons of debris a well as those needle balls from the transmission area. I did this without taking anything apart. The handle now moves smoothly in all direction. Brother, you saved a retired old man alot of money. I sent you some cash so that you can get a cup of coffee on me! Greatly appreciate your generosity, God Bless you!
Brother thank you!! Helped me fix my 100 series. Same exact issue. Appreciate what you do! 👊
I absolutely loved this video!! The best thing about the channel is that I can learn and it's free! God has blessed you with quite a gift brother. Great video. I cut 20 lawns while listening to this 🤣🤣👊💯
Thanks! I am that 80 year old retired old man you were referrring to in your video. I could not place handle in reverse. I saw all the debris you cleaned out and a light bulb lit up in my head. All I did was use a long screw driver and a heavy duty blower and did the cleaning without removing anything! The handle now goes in reverse and is smooth in all directions. Brother you saved me alot of money. God Bless you!!
thank ya sir!
I'm sure you grow tired of all the nice comments and praise and stuff, but you just saved me a lot of money. With labor so high these days, it's like there's no such thing a small labor bill...and how much can you spend fixing a thousand dollar mower. Thanks again. It was actually fun!!!
You good Mr Tom I been watching all your videos ***** 5 🌟
Gotta love those plastic transmissions open to the air so you can fill it with grass and have problems
We were just talking about this repair,I did one early this year,My first ever,now I learned the easy way.Thanks.
Nice work tom . Glad it was just needed to be cleaned from the debris 😊
Tom to start a dedicated John deere repair shop! He has impressed John deere so much they have decided to change the branding to Tom deere running off a Doby straton engine. 😅
Toooom Doooobyyyy! Nice work, Tom! I switched out a trans on an MTD Yard Machine a number of years back. First I ever did. Had a blast! Thanks for sharing this fun video! God bless.
Great video , thanks for sharing.
This was my problem
I’ve drilled a hole into back plate and made a copper pipe blower to blow out the top of trans
Works 😊
It amazes me how this could be designed to fail like this with it being open to air but not being easily cleaned. I believe I have this same problem with my Husqvarna.
You have a nice beard😀hello fro Slovenia👋
I ended up with this job also. An E100 with so little time on it, the rear tires still have that extra, thin rubber on the center of the tread. Tks for this video, it made my day much better and easier! This guy also went out to buy another mower. He told me to scrap it if I couldn't fix it,
After I got it back together, I saw it had 4 hours only on it! I just can't get over someone buying a JD for all the money and getting a plastic transmission.
I have a Craftsman 42 inch tractor with one of those plastic transmissions. After about 8 years of cutting my lawn, and the neighbors front yard, I noticed it was getting hard to shift. I took out the battery and battery box to see what was going on, and sure enough, the top of the transmission was covered with millions of pieces of grass clippings. I thought I could just take a vacuum and suck out the dead grass in a minute or two, and soon be finished. Nope. The grass was packed down in between the plastic ribs molded into the transmission so tightly, that the vacuum couldn't get much of it out. It was as if it had been glued down in there. I had to spend at least 45 minutes breaking up the chunks with a screwdriver and sucking out the pieces with the vacuum. As fate would have it, there is just enough stuff in the way that getting the vacuum hose all the way down into the fins is impossible. Trust me, it can't be done. Unless you take the transmission out, you need to dig the grass out with something metal to get the vacuum hose close enough to suck the grass chunks out.
How that grass gets up inside there and packs that hard is amazing, but it does. That was one time I missed my 240 volt air compressor that Hurricane Katrina ruined.
After all of that cleaning ordeal, I thought that I could forget about it for years, but no such luck. Last year it started acting up again. This time I caught it early, so breaking the grass loose was a lot easier. For those transmissions, cleaning the top is a regular maintenance item. Thankfully, that expensive short drive belt on them lasts for decades in residential use.
When changing the grease seals on those transmissions, you want to go around the grease seals with gasket sealer, because even the new ones have a tendency to leak around the outer edge that goes into the transmission. Those transmissions are packed full of thick grease, so if a little oil is lost, you can ignore it. Just change the axle seals and forget about it.
I would have stripped all the holes out in that plastic housing using the impact gun. I have a John Deere and I like it; I bought it last year; I am 67 and was cutting about 1 Acre with a push mower. Thank you for the content you share.
It is like the French Army Tanks. They only work in reverse too.
🤣🤣
Love it, Funny as can be....🤣
Great video!! I was at my camp with limited tools. Took off wheels loosened the debris and blew out both sides with the leaf blower after working the handle it freed up and worked.
loving the videos thanks i appreciate them ,
God bless and you are in our prayers daily
Great Video ** Stop ** Before dropping transmission ** I fixed mine yesterday, stuck in forward for over 3 months. I used a Habor Freight Central Pneumatic 150 psi compressor with a HF Merlin 90 psi blow gun kit 64149. I placed the longest probe in the Merlin kit into each of the metal slots / holes around the transmission along with following the shifter lever and it blew 4 dust pans of wood chips and crap off the transmission. Shifts like it's brand new !!!
This pointer is coming from a D105 owner that has personally fixed the transmission pulley (2) times by dropping the transmission.
Thanks! Great videos Tom especially the intro’s! More Stihl weed eater repairs🥳😂👊🏻
Thank Ya BROTHER!!
Easy fix this time,that's the problem with these transmission's,that dirt and debre will sure stop up the works,
You're awesome my friend Hope all is well love your videos
I had to laugh when you mention about being 80 yrs old...well I am 77 and tho I love to work on machinery, just can't do things like this anymore. This is a excellent video, was just wondering if there is a adjust on one of the rods for the belt?
Mine is hard to get moving in reverse, have to press really hard on pedal to make it move, also same with the forward.
no theres no adjustment, belt may be getting worn or theres debris in there
Great video, thank you!! I got it tore a part but had a piece of plastic causing trouble. Can I send you a couple pics for your advice somehow? Thanks!
sure
Plastic transmissions.... Don't get me started. 🙄
Other mechanic sawed a 4 inch hole in back plate on his mower and blows it out afterwards
That one different from mine , mine has two petals
yea your's in hydrostatic, this one isn't
@@TomDobyMowerRepair yup and my Tran is metal too
you have the tuff torque tranny
Hate the plastic trans
Just junk and it has to have the top cleaned all the time
Pulling trans cost big bucks 😢😢
Please don’t buy the plastic Tran in any brand, there all the same stuff
Amazing job...............