hey sorry to bother you, but i didn't quite understand the cut the trace part, what middle wire does he refer to? thought i could just ask you and sorry to bother you again
@@joshuagrado3203 if it’s a software problem this will revive it. If the hardware has failed it won’t but the only way to know which it is would be to try it.
Yea I think so too. Do you have any other suggestions how to address this type of issue? I already changed the power switch board but it still won't turn on.
Thanks for the Tutorial. But I have a question. If you cut the middle wire and connect it to your TTL Converter it will not be possible To charge the battery inside the PSP? if you cut the data line you don’t have any Battery protection or?
@@masterrudi This modified battery can be charged in the PSP while running baryon sweeper in normal mode. I might also charge in some third party psp battery chargers but I have not tested any of them for compatibility.
Hi! Would it be possible for you to make a video tutorial solderless? I watched the one shared by the A khubik but it mentions that there might be some issues with the power supply and I don't really understand it.
I got this working but it booted normally so I installed 6.61 OFW and then JB it using ARK-4/cIPL. Now it bricked again and I tried to use my battery again and it gives a valueerror because of a negative value for I/O, other times it runs until it runs of of the keys.
Hi! Is the battery still needed for the 1000 models? I unbricked a psp 2000 without a battery. Also, you mentioned something about 8dc and 9dc at the end, are you talking about the power input ?
@@ubs220 the original Sony battery converted to a “Pandora” battery only works on 1000 and 2000 series models. For all the other ones you need a Barton sweeper.
@@rmonkey6513 The one coming from the center pin of the battery connector. There are many variation of the circuit board, so yours may look a little different.
hello sorry to ask, but I didn't quite understood the cut the wire part, do you refer to the middle two-lined symbol between the minus and plus symbols or am i mistaken completely?
If you look closely at the circuit board, there are usually 3 traces between the 3 pins of the connector and the rest of the board. We need to disable the middle trace, by cutting through it to break the connection.
@@lusid1gamesare you using ddcv10? Also are you just using the battery? Some tutorials say to have the power cord in too and power the unit up if it doesn’t power on automatically
Nice video.
Straight to the point, easy to follow.
Just discovering your content now. Very cool and interesting
Adding this to my to-do list. Thank you!
Now you have to get a Milk-V Duo and make the portable version 😃
Awesome tutorial. Thank you.
hey sorry to bother you, but i didn't quite understand the cut the trace part, what middle wire does he refer to? thought i could just ask you and sorry to bother you again
@@ry460_ The middle trace in the battery that connects to the data
Saludos master. Puede faciltar los archivos necesarios para hacer el proceso ? Gran video.
Thanks for this awesome guide video. I would like to ask if will this revive a psp3000? Issue is charging only (orange light) but won't turn on.
@@joshuagrado3203 if it’s a software problem this will revive it. If the hardware has failed it won’t but the only way to know which it is would be to try it.
Yea I think so too. Do you have any other suggestions how to address this type of issue? I already changed the power switch board but it still won't turn on.
Thanks for the Tutorial.
But I have a question.
If you cut the middle wire and connect it to your TTL Converter it will not be possible To charge the battery inside the PSP? if you cut the data line you don’t have any Battery protection or?
@@masterrudi This modified battery can be charged in the PSP while running baryon sweeper in normal mode. I might also charge in some third party psp battery chargers but I have not tested any of them for compatibility.
Awesome!
Glad you liked it!
Hi! Would it be possible for you to make a video tutorial solderless? I watched the one shared by the A khubik but it mentions that there might be some issues with the power supply and I don't really understand it.
I got this working but it booted normally so I installed 6.61 OFW and then JB it using ARK-4/cIPL. Now it bricked again and I tried to use my battery again and it gives a valueerror because of a negative value for I/O, other times it runs until it runs of of the keys.
No way did u find a fix i dont want to unbrick my 3000 after 3 years just to rebrick it
@@ubs220 it was fixed for a bit but it eventually succumbed to hardware failure
Hi! Is the battery still needed for the 1000 models? I unbricked a psp 2000 without a battery. Also, you mentioned something about 8dc and 9dc at the end, are you talking about the power input ?
@@skirnir393 DC9, is the short name of some software that installs on the memory stick to reimage the PSP internal flash storage.
@@lusid1games Oh! thank you for the clarification. I have a pile of psp's to resurrect.
Can you make a tutorial for the memory stick setup?
Can anyone help me get this working on a 3000 psp with an original sony psp battery sweeper ?
@@ubs220 the original Sony battery converted to a “Pandora” battery only works on 1000 and 2000 series models. For all the other ones you need a Barton sweeper.
nice
What software is used to make it connected to the computer's USB? Could you give a step-by-step guide on what to do after making the drums?
@@meuassuntoeode The software is called pysweeper. It's a python based battery emulator. Https://github.com/khubik2/pysweeper
@lusidgames, does the battery need to be fully charged when you do this way or can you connect a psp charger too while doing this?
I have the same question
Which trace i have to cut ?
@@rmonkey6513 The one coming from the center pin of the battery connector. There are many variation of the circuit board, so yours may look a little different.
Can you make me one ? If so how much ?
Which gage wire did you use for it?
Does the battery need to be charged?
How you make the memory card?
can i ask you a link to get the cp2102
Where'd you buy the cp2102 usb to ttl?
I just picked a good deal on amazon.
hello sorry to ask, but I didn't quite understood the cut the wire part, do you refer to the middle two-lined symbol between the minus and plus symbols or am i mistaken completely?
If you look closely at the circuit board, there are usually 3 traces between the 3 pins of the connector and the rest of the board. We need to disable the middle trace, by cutting through it to break the connection.
@@lusid1gameswhat happens if it’s these new version 3 boards? The 3 wires are not visible and I can only see one.
@@lusid1gamesare you using ddcv10? Also are you just using the battery? Some tutorials say to have the power cord in too and power the unit up if it doesn’t power on automatically
What u cut in battery? I can’t see
@@سلطان-و4ب2ص The trace coming from the center pin of the battery connector.
say... does it work for psp 3000 04g models?
Yeah. Just need to use Sony MMS instead of DDC.