DIY How to Flush & Change Radiator Coolant on a GSXR 600
HTML-код
- Опубликовано: 12 май 2019
- 🔥CHECK OUT THE MERCH 🔥
teamsixthree.bigcartel.com
Welcome back to another DIY. On this video I'm going to be flushing out the old radiator coolant and replacing it with new coolant (engine ice.) Hope you guys like it make sure to LIKE, COMMENT and SUBSCRIBE. thanks for watching. More videos coming soon,
FOLLOW US ON INSTAGRAM: TEAM_SIXTHREE
if i did not bleed this boltt can it make baik run different? 188 f fan kicks in and i dont know whay pliz help me.. can it be a problem? (sorrry fore my english pliz)
Avto Getling what kinda bike? The fan on the gsxr kick in at around 220. If you follow the steps and made sure you get out all the air on the radiator, you might need to go back and check with out flushing it. Take out the radiator cap when your motorcycle is cold then start it up with out the cap and rock it to see if there’s any air. Also make sure you have the right amount of radiator fluid maybe if it’s low you might be over heating the radiator and that’s not a good thing. Also on bleeding radiator you should try once you did the first steps and check the levels. Hope this helps best of luck ride safe don’t forget to subscribe and check out our other DIY
So I bought my 2007 Suzuki GSXR 600 last year. I never thought about checking the coolant I realize that my reservoir was completely empty and this year it’s been riding hot constantly so I’m changing the coolant right now but the coolant when I flushed it was so low do you think that I harmed anything in the engine? I’m curious if I need to get a new radiator plus a new water pump the fans turn on at 2:20 the highest I’ve seen the bike get up to when off was 235 but bike was off an fans where on. I’m curious have I done any damage is there anything I need to do please and thank you
@@Motoherb its oky. you dont need new radiator or water pump. just fill up radiator and reservuar. and then heat motorcycle and see what will happand. it radiator fan turn on 220 and will off 210 everything is fine ! and if it go haier then 220 or 228 then you have problem, and you need staf. kind sensors and sam of shit :d
Great video. It's been a while since the last radiator flush service that I've performed on my gixxer this video really brought back all those essential steps on how to get this done properly, thank you.
Your welcome, thank you for watching
Thanks for checking out the video.. more dyi and fun rides on my channel make sure to check it out and thanks for the support 🙏🏻🙏🏻
This the exact video I’ve been looking for! Thanks bro
Thanks for watching hope the video was helpful
Thanks for watching 🤙🏼
Tnks bro.
Thanks for watching 🤙🏼
👍👍👍
Thanks bro
Thanks for watching 🤙🏼
Thanx for the video homie... Just bought a Suzuki 600 and u have a new follower...Can u do a spark plug video?
Thanks for watching n subbing homie 🤙🏼
Check out our videos I have another DIY on how to install spark plugs and air filter.
@@team_sixthree8956 Thank u I will look for the video.
Hey I saw two tubes hanging on the left side of your bike, any ideas to where they are attached cause mine were lose..
Those are drainage tubes to get rain water out of the frame. They hang loose
Those two tubes connect to the bottom of gas tank don't they?
@@user-do1mc5cx6sthat’s what I thought at least I’ve got 2 that connect to the gas tank, there breather tubes pretty sure
Bettt
Video is very helpful, now my only question is I have a 06 750 and my temperature only goes all the way up to 238 when I push the bike extremely hard. What do you think the reasoning for that is? Thank you in advance.
U should check if your fans turn on when it reaches high temperature also you should change the coolant if you haven’t done so.
Keeping up with the maintenance of your bike should run smoother. 🤙🏼 ride safe out there
How did you dispose of the flushed fluid? Just curious.
I'm only at the first few minutes into the video.
In the dirt away from dogs
@@team_sixthree8956 Not good for the environment, methinks.
Do you remember how many Ml of coolant you put? The manual says 2650ml but i was able to fit only 2200ml after completely (i think) bleeding the system...
I’ll double check on that I’ll get bsck to you it’s been a while.
@@team_sixthree8956 thanks a lot man 😁
@@alessiodimauro7707 I went with 1/2 gallon
Depending on the year of your gsxr the owners manual might change.
But it seems like your about right on the mark. Run the bike let it cool off maybe you’ll be able to put in the rest.
Check the reservoir see if you can top it off with what you have left.
Best of luck hope i was able to help or atleast to give you an idea 💡
Ride safe thanks for watching 🤙🏼
@@team_sixthree8956 thanks a lot for checking that man. I really appreciate it. You're the best 😎
Does the engine ice make it run any cooler?
It does run cooler then oem coolant.
Thanks for watching 🤙🏼
I have a leak somewhere but it's really small and I didn't top off the oil. Now when I topped it off there's a little white smoke coming out of the exhaust. Could it have been that I didn't have the correct fluid adjustments? I may have a coolant leak? Or could it be I have air in the coolant lines causing it to overheat?
A leak some where? meaning your radiator reservoir? Or radiator?
You have to check on your owners manual on how much radiator coolant takes depending on make and model of your bike.
The white smoke I’m not entirely sure it’s because of not topping off or over topping your reservoir. Wouldn’t be able to tell you what it might be.
Maybe the gas or petrol your using. Not 100 percent sure. But it’s not because of the radiator fluid.
If you feel that you have air bubble you would have to re do your radiator system fluid to make sure just inside of rising it with water or getting rid of the fluid you can re use it.
Best of luck hope I was able to help any more questions don’t hesitate to comment
Thanks for watching and asking questions
Don’t forget to subscribe
Ride safe
How do you know when you've got all the air out the system ?
There won’t be any air bubbles coming out the radiator.. thanks for watching
Man I messed up and wrote you in a reply part of someone staying I was just curious if I did damage to my radiator water pump because I’ve been riding my bike pretty hard for over a year racing a lot of people and I realized when I was changing the coolant that there was like a little to none plus there is no coolant in the reservoir so I’m putting in the engine nice as we speak and I was just curious if I’ve harmed my bike if I need to get a new radiator in a new water pump please let me know thank you
Were you over heating at all after running it? Did you notice any changes when riding, any signs of steam or anything?
If there’s no over heating or anything you must of had some or barely any on the actual radiator.
Hopefully it’s nothing major and with new engine Ice you should be good 👍🏼 thanks for commenting and try not to neglect your bike if you don’t like losing a race.
@@team_sixthree8956 So there was never no steam and the bike hasn’t been making any different sounds but when I did drain it there was like very very low in the color was like dark brown I flushed it three times until the water was clear coming out with a distilled water I forgot to buy an extra bottle of engine nice so I completely filled it up with the engine nice I have now but it did not top it off whatsoever so I’m have to order another bottle of energy nice before I can do anything but I have yet to lose a race
@@team_sixthree8956 I do apologize with the texting I was using text to talk as it tends to choose different words I appreciate what you’re telling me because I was worried if I needed to buy a new radiator or a water pump thank you
@@Motoherb you got lucky my friend unless it gets damaged in the long run. But glad your following some quick and easy steps to clean up your radiator 🤙🏼🤙🏼
@@Motoherb no worries I kinda knew what you were trying to say. Best of luck on your races and ride safe. And thanks for watching and commenting
Subscribe if my video was of any help
And don’t forget to comment if you have any other questions
Is there another bleed bolt ?
not on the GSXRs there's only one bleeding bolt
@DEEEZZZ yes they should all have one
@DEEEZZZ it’s not under the tank but they have a bleed bolt
@DEEEZZZ 😂😂
Hey bro do you know if a 05 gsxr 600 radiator would fit on a 06 600?
Thanks for watching, not entirely sure if it would fit might want to check gsxr forums for better answers.
Best of luck
If you can like and subscribe 🤙🏼
Are you giving slight revs with the cap off
No it would cause the fluid to jump out if the cap is off. It’s good to warm it up before then let it cool off. But no revs needed.
Thanks for watching
Not killum