EGR Valve Replacement On Mercedes Sprinter - Step by Step Guide

Поделиться
HTML-код
  • Опубликовано: 10 фев 2025

Комментарии • 58

  • @KALUANICHOLAS
    @KALUANICHOLAS 10 месяцев назад +2

    Thanks Mr kit for teaching us ❤. keep it up

  • @Nick-bp7jf
    @Nick-bp7jf 10 месяцев назад +1

    Thank you for the video.
    They have made the EGR valve much easier to access on this OM642 than the earlier ones. My Jeep has the OM642 and the EGR valve is at the rear of the engine. It is a nightmare to get at.

  • @commshopctr
    @commshopctr 10 месяцев назад +2

    What may I ask should you expect from the engine performance with an EGR valve not functioning correctly? Great illustration… thank you

    • @KITS_Auto_and_Truck_Repair
      @KITS_Auto_and_Truck_Repair  10 месяцев назад

      @commshopctr My Pleasure! a Defective EGR valve can cause rough idle, low boost codes and DPF Regen issues etc...

    • @GabrielEbenezer-b2s
      @GabrielEbenezer-b2s 10 месяцев назад

      Is that a diesel engine?

  • @wsnxumalo6707
    @wsnxumalo6707 4 месяца назад +1

    Very good and informative one. From South Africa

  • @TheDaviddut
    @TheDaviddut 7 месяцев назад +1

    Helpful video! Thank you. Do you have a video on how to test it, which you did off camera on this one?

    • @KITS_Auto_and_Truck_Repair
      @KITS_Auto_and_Truck_Repair  7 месяцев назад

      @TheDaviddut My Pleasure! not yet, we will update the EGR Valve testing video soon!

  • @celicagtisra
    @celicagtisra 6 дней назад +1

    Hola, es normal que tire agua refrigerante cuando se quita la EGR ? Quité la egr sin antes quitar la tuberia y tiró agua refrigerante, paso algo si cae un poco de agua dentro ? gracias

  • @keenedgedesigns
    @keenedgedesigns 7 месяцев назад +1

    Your videos are great.

  • @manuelm.2692
    @manuelm.2692 6 месяцев назад +1

    What was the code # for the egr valve? Thanks bro, for your videos

  • @timmytran2616
    @timmytran2616 6 месяцев назад +1

    Thank you good video.😊

  • @ssentaayiakram2476
    @ssentaayiakram2476 9 месяцев назад +1

    Thank you very much Mr kits but i have my question. How do i get the ECU pin outs of cars (Toyota car engines 1zz,1kz,2kd,1kd,1nz,2zr,1gd,2gd,) and wiring diagrams

  • @mohabatkhanmalak1161
    @mohabatkhanmalak1161 10 месяцев назад +1

    Thanks, I am a DIY home mechanic/tech and I have never replaced an EGR valve before. This would give anyone confidence in repairing modern vehicles.🦋
    Just curious, how much is that new OEM EGR valve cost - you don't have to give a figure, just an indication was it cheap, average or quite pricey. Back in the day, most Mercedes-Benz OEM parts were as cheap as chips!🐞

    • @KITS_Auto_and_Truck_Repair
      @KITS_Auto_and_Truck_Repair  10 месяцев назад +1

      @mohabatkhanmalak1161 My Pleasure! I'm glad to hear that the video was helpful! This OEM EGR valve is pretty pricey!

  • @olpeman
    @olpeman 10 месяцев назад +1

    nice video. greetings from germany

  • @NoSkyLarking888
    @NoSkyLarking888 7 месяцев назад +2

    I have two codes for Freightliner 2010. P213 and P672. No transmission codes however I have jerk and stall sensation sometimes. Can these be related?

    • @KITS_Auto_and_Truck_Repair
      @KITS_Auto_and_Truck_Repair  7 месяцев назад +1

      @NoSkyLarking888 Yes, check your accelerator pedal sensor

    • @NoSkyLarking888
      @NoSkyLarking888 5 месяцев назад

      @@KITS_Auto_and_Truck_Repair can you please help? I have a 2010 Freightliner Mercedes Sprinter Van 2500. Just learned that the previous owner disconnected the SRS from the computer. The CPU is tampered with. I want to know if I correct this issue and have it reprogrammed will this negative impact my van? I'm not sure why someone will disconnect the computer in the first place? What are they hiding? Any advice would be great! I just need some answers before I decide on what I should do next. Thanks in advance.

  • @zx6r98
    @zx6r98 25 дней назад

    What about the coolant ? Do you wait till the engine is warm and let it run through the heat cycle ?

  • @Carxpert6786
    @Carxpert6786 9 месяцев назад +1

    Good job bro❤❤❤

  • @CharlesCharles575
    @CharlesCharles575 10 месяцев назад +1

    great video thanks bro

  • @jerrycornelius3397
    @jerrycornelius3397 8 месяцев назад +2

    Nice Job...

  • @mckinleysov2677
    @mckinleysov2677 10 месяцев назад +1

    Hello Kit, I have one question, Does Mercedes Benz (S-500/ 2001) have radiator fan control module, and Where is it located? Thanks.

    • @KITS_Auto_and_Truck_Repair
      @KITS_Auto_and_Truck_Repair  10 месяцев назад

      @mckinleysov2677 The fan on that model were commanded by a relay!

    • @mckinleysov2677
      @mckinleysov2677 10 месяцев назад

      Hello Kit. What problem with radiator fan doesn’t turn on, when I turn car on? Thank you so much.

  • @MichaelWilliams-ro9bm
    @MichaelWilliams-ro9bm Месяц назад +1

    I’ve seen other videos where they just dissemble and clean current EGR valves. Are you not a fan of cleaning?

  • @ukiemanserg5163
    @ukiemanserg5163 4 месяца назад +1

    Thanks bro

  • @VinhPham-rv3lv
    @VinhPham-rv3lv 9 месяцев назад +1

    Do you have any clip for leaking DEF tank ? Thanks

  • @carloscalderon5548
    @carloscalderon5548 2 месяца назад +1

    Did you have to program the EGR valve

    • @KITS_Auto_and_Truck_Repair
      @KITS_Auto_and_Truck_Repair  2 месяца назад

      @carloscalderon5548 No just plug and play, but some models require a teach in process

  • @_Micali
    @_Micali 5 месяцев назад +1

    The old EGR valve looked pretty good. The fins had good spring tension…..why did you replace it?

  • @jasonmiller1730
    @jasonmiller1730 6 месяцев назад +1

    You never mentioned the check engine light being on nor if it clears on its own after the new egr was installed. Im replacing mine now on my 2015 with 130,000 miles, hope this fixes the check engine light issue as 3 codes say its egr issues, cleaning didnt fix, now trying new aftermarket at cost of $283.00 cant afford the dealer cost of $800+. As this still may not fix issue, seems to be a guessing game sometimes with these sprinters, even the dealer has done other repairs and got it wrong, so had to limp mode back to dealer. Thanks for the vid though it was helpful.

  • @michaelvarga7108
    @michaelvarga7108 7 месяцев назад +1

    what about the retraining procedure?

  • @martinarrieta248
    @martinarrieta248 10 месяцев назад +1

    Grasias

  • @chrismillerphotography8359
    @chrismillerphotography8359 Месяц назад +1

    Obviously dont need to pressurize the coolant system again huh?