G&G CM16 Raider L 2.0e | Upgraded 15” Rail System | Google Review
HTML-код
- Опубликовано: 4 окт 2024
- Features
Polymer billet style receiver
Injection molded polymer M-LOK handguard
Full length top rail
Ergonomic polymer motor grip
Front and rear flip up sights
PDW style stock
Brake style muzzle device
Full metal version 2 gearbox with inline MOSFET and ECu
The newest evolution of the G&G Combat Machine line up takes all the standard features that everyone has come to know and respect from the Combat Machine line and improves upon it by offering upgrades and modifications that are never seen at such a low price point, and yet done to such a high level of quality. The CM16 offers an entirely redesigned Polymer receiver, borrowing from the ever popular billet style that has been seen more and more in the firearms world. Other improvements include and ambidextrous magazine release, ambidextrous mock charging handle, metal keymod handguard and a selector switch with a heavy duty detent that gives the user tactile feedback when changing fire modes. While the GC16 Predator knocks other AEGs in its price range out with its agressive styling, it's whats on the inside that counts most. Installed from the factory is a MOSFET, allowing the user to use LiPo batteries without worrying about damaging the gun and a programmable fire control which allows the shooter to choose either full-auto fire , or three round burst fire modes. Loaded with features and good looks the CM16 Raider an excellent choice for any airsofter who is in the market for a gun that has all of the latest features and technology
bruh, that looks so clean
Maybe u should take your magazine out when u are taking apart your gun
Canadian Bacon 🥓
And the gun is on Fire btw
Always film with the light in front of you.
Thank you i wannted to change my handgard you are trully a life saver here man
This was the most inefficient way to take apart an aeg but it worked and looks sick
That looks sooooooo clean!!😱🤩
great, working with magazine in, BBs in, and kids in the room, great man!
Right on! but they are more dangerous than me. They actualy shoot each other in the house
@@Google5ive and you let them?
thank you so much this video is great
Thanks for the vid, I got stuck on the removal of the locking system, for some reason mine had 2 thin washers that made it extra tight, I had to jam a pair of pliers into two of the grub screw holes to get enough purchase to screw it off.
Great video man keep this up thanx
Appreciate it!
Thanks
Wow, very cool mod. Make the gun L@@K diff from the original model. Thx 4 sharing on the internet. Keep on shooting air soft.1
what the hell. how did he find that handguard i’ve been searching for that for like ever
Bro just get it off of AliExpress
love that look. I'm new to airsoft and been looking at the Raider 2.0. To do this is there anything specific I have to look for when buying new rails?
Ik this is 2 years old but no one answered.
Some tips:
Find a rail cover that matches your barrel length or the barrel comes out a bit,
Most attachments also use the picatinne system (basic rail system)
If it's long find one that's metal because you will hit it on everything.
@@burp1179 the tips help a lot but one concern is the fact that I don’t know what rails are compatible with the raider 2.0, id hate to buy a rail for it not to work
I need the name of this hanguard. Fresh af
Nice video, subbed and liked!
awesome thanks for the walk through.
You bet
I recommend getting a battery extension pack or crane stock for the 2.0e
Thank you for good conten
Love that look, want to do the same now :D whats the name of the silencer?
can you send a link to the rail if you can still find it?
Yes please!
I want to like the video he did a great job putting it together I just don’t need it on my likes list. But hats off to you for a actual good airsoft guide.😘
Its a MAG not a CLIP
@@maxotto9877 shut the fuck up, i care
@@maxotto9877 shut the fack up I care m8
Max Otto shut the fuck up, I’m joining this joke
The real question is did anyone find out a way to get a better stock or some sort of extension for the battery storage area???
i did not and it sucks
Yep I chose to make my own battery extender out of stuff I found around the house
Mock peq boxes are an easy way to add more storage.
@@Google5ive That is the same buffer tube that the ARP 556 and ARP 9 use. They actually have a battery extension unit that you can buy that essentially clips on the same way the buffer tube plate does that you take off to put your battery in, adds about 2.5-3 inches extra space. I'm able to keep a 11.1 LiPO stick battery in my ARP 556 without an issue with it.
@@matthewmerritt5631 What specific battery are you using?
Hey bro, what exact rail did you buy and where from? I own this gun & im looking to do the same thing because of thay barrel poking out the end. Only thing i disliked about this gun was that.
MAG MAG MAG ITS CALLED A MAG!!!!!!!!!
BobbyBeatHazard it’s a suppressor no a silencer! It’s a red dot sight, not a scope!
How did you get the orange flash hider/muzzle brake off? I have the normal raider 2.0 and i cant figure it out.
there's a grub screw underneath holding it onto the threads.
you have to heat it up and remove it using a wrench
CuttleFisH I just took a saw and cut it off then under were the 14mm threads
Magazine not clip. A clip is just a plastic or metal strip with bullets on it. A magazine is an actual contai er that fully encases the bullets. Ie,the m1 Garand uses clips wherr you shove the entire thing into the gun but others just have you push the bullets into the gun and discard the clip.
Also you always clear the gun before dissassembling it. I do t care if its real or not.
Max Otto why are commenting on everyone’s comments
what about your orange tip? in my country you need an orange tip for it to be legal to carry around
Not in NC
Hi I’m looking to change the rail to an Mlok and my receiver is broken upper to be specific what can you recommend for the cm16 L thank you
Hey man what’s the name brand of that new handguard?
Name brand of the new rail*
it a no name brand but can be found on ebay by search of ".223 15" Inch Free Float MLOK M-lok Handguard Rail System- top rail cut"
Is this gun good for outdoors?
My bottom one just won’t come out
Dude where can i find this scope?
the scope is valken red dot sight rda30 if there is a vip airsoft near you they sell them there
I am subscibing!
should've taken mag out right away LOL. then take off the upper receiver, then the inner barrel so you don't risk messing up your hop up unit.... don't do what this guy did guys! always clear your gun before working on it
where do i buy the rails? i will be polar starring a cm16 l 2.0e for a friend and we want the extended rails.
Hi! Have you ever tried to replace the PDW stock?
Would you say the spring is easy to upgrade in this gun i'm thinking about upgrading mine.
I know this is kinda old but I saw the gun before, I'm trying to do the exact same thing to one I just got stock could you help with parts suggestions or where to get them
Righty loosely lefty tightly?
Canadian Bacon its ccw so
Canadian Bacon yes
Bro where did you get it!
ebay it is not a name brand rails but can be found on ebay by search of ".223 15" Inch Free Float MLOK M-lok Handguard Rail System- top rail cut"
Google 5ive awesome thanks
I have that asg, thx for this video.
I have a question: its possible to change the back and put the crane ?
You change any part of the gun
How do you remove the Orange barrel
I dont like that my cm16 raider 2.0 has a so long barrel can i make him shorter ?
Yes you can buy a shorter barrel
@@Google5ive thank you. You got my sub.
Where can I buy extra mags?
How did u get the flash hider off
Where did you get the flash hider?
how much did it cost
I know this is old, but anyone know what outter barrel he used ? Just as I hate the front sight on the normal one
It was a cheap barrel from amazon
How did u remove that muzzle
Fatima Alsawafy you can cut it off
It screws off , if you live in america ( in some states you need a orange muzzle to sell it or what ever) I'm not sure it can be taken off by hand. I believe there is a grub screw
Fatima Alsawafy also I heard you can heat it up then twist it off
@@travispinkerton9916 I'm pretty sure you can but you might have residue to deal with
lore player yeah but you should have no problem screwing on a suppressor
can any one send me a link of these mlok for cm16 2.0e
Its a mag not a clip
Your right a mistake was made
those goggles useful in the house?
lol
can someone tell me the original rail length?
7inches
can you put a link, where I can buy it ?
Operador Dimbou just go on eBay and look up free float keymod rail and it will pop up
It's an m-lok rail, search up 15" m-lok rail/hand guard and you might find it
whats the name of the rail sytem
generic from ebay cost like $20
Have you replaced the inner barrel?
Content. Lol. Auto correct
Don’t buy stuff from eBay very unreliable use cites like evike
ebay wasnt bad just have to be careful of what you buy and i order stuff from evike all the time
• Xyletto • no very reliable. You buy from people who have good rating and if you get scammed eBay should pay you back
Contrnt