Great video what's the type of led striplights are you using cause your link does not work. SMD5050 30led. SMD5050 60led or SMD3528 30led. SMD3528 60led? And what's the wattage the led strips are working on for the power supply ?
Hey guys thanks again for watching, Please subscribe as I will be posting another project soon to hang up in your house, up high, behind your dj booth or just to have for parties.
Hello IamCcam, I have a question if you do not mind me asking. on the sensitivity knob where do you have it located, Because I made mind and is not as responsive as yours. and I try playing around with the knob and not much change.
hello, thanks for watching.... I put mine at the bottom on the right frame... I figured most djs play with the speakers facing in front of them so it would be hard for the module to pick up. that's why I put it at the bottom so it would pick up the bass from the floor. try it out.
Hi Mate good video can you go into more detail of how you connected each panel ie frame 7.14 sec there is a loop and then you are splitting .yours is the only vid that shows roughly how you achieve this ,are all the led strips going back to one power supply , i have four panels split into 2 sections and ideally would like it to join in middle and have just one power supply .Thanks from sunny London
christian mckay hi Christian, thanks for watching, I'll draw a template on how i connected 4 panels with one power supply and one music controller shortly. Cheers!
It would help if you had adjustable feet on it in case the surface it's on is not level. Also it should be 4 panel since most venues supply 6 ft tables and 3 panels don't usually cover s 6ft table well.
La'arel Johnson thank for watching! when you click on the site, it takes you to "home" click the section under "work" and its the 3rd item down. thank again!
Table 18 hey thanks for watching, there's a music controller that attaches to the leds. Go to www.dayandnightvibes.com under product recommendations. Cheers
Awesome thank you very easy and cheap and very fun to do.
☺
nice job i subscribed
Nice video ima have to learn this
Great video what's the type of led striplights are you using cause your link does not work. SMD5050 30led. SMD5050 60led or SMD3528 30led. SMD3528 60led? And what's the wattage the led strips are working on for the power supply ?
They are RGB 5050. 300 leds per roll which is 16.4 ft.
Look at hitlights.com as well for quality leds
Very nice, did I miss what do you use to make them sound active?
The hitlights music controller. ;)
Hey guys thanks again for watching, Please subscribe as I will be posting another project soon to hang up in your house, up high, behind your dj booth or just to have for parties.
Great video, how much are you selling them. I seriously need one
Hello IamCcam, I have a question if you do not mind me asking. on the sensitivity knob where do you have it located, Because I made mind and is not as responsive as yours. and I try playing around with the knob and not much change.
hello, thanks for watching.... I put mine at the bottom on the right frame... I figured most djs play with the speakers facing in front of them so it would be hard for the module to pick up. that's why I put it at the bottom so it would pick up the bass from the floor. try it out.
How many feet of LED lights were used? Were they RGB Lights?
Supremium Sounds they are RGB, also you'll use a roll per panel. (16.4ft)
Great. Thank you.
Hi Mate good video can you go into more detail of how you connected each panel ie frame 7.14 sec there is a loop and then you are splitting .yours is the only vid that shows roughly how you achieve this ,are all the led strips going back to one power supply , i have four panels split into 2 sections and ideally would like it to join in middle and have just one power supply .Thanks from sunny London
christian mckay hi Christian, thanks for watching, I'll draw a template on how i connected 4 panels with one power supply and one music controller shortly. Cheers!
Hi Christian, can you provide me with your email address so I can send the image? Thanks
Really appreciate you getting back too me my e.mail is Badboysbakery1@gmail.com Thanks Again Chris
any chance you can hit me too at chardymark @ gmail.com
New vid up on the wiring
It would help if you had adjustable feet on it in case the surface it's on is not level. Also it should be 4 panel since most venues supply 6 ft tables and 3 panels don't usually cover s 6ft table well.
I have 4 panel as well. You can adjust the length with a simple screwdriver. 👌
phat yo!
what lighting are you using?
DJ Outlandish all the accessories are on www.dayandnightvibes.com
one question have you had anyone complain saying it to much?
Did you place the LED on the inside or outside of Lycra?
Randy Krouth inside behind it . facing inward for the blur effect.
New Vid up
what controller are you using it isn't listed on your website
La'arel Johnson thank for watching! when you click on the site, it takes you to "home" click the section under "work" and its the 3rd item down. thank again!
no product brand or name listed, or link?
La'arel Johnson please feel free to email me for any help/advise or any suggestions. :)
awesome i appreciate it!
La'arel Johnson you're very welcome! I've purchased 5 so far and they're still holding up from 2012 till present .
Which led strips did you use? I saw it had a wireless remote.
the remote controls the music box that the leds connect to. the leds are hi output rgb. look at the website www.dayandnightvibes.com
so did you just cut out strips and connect them together with led connectors?
+Trey Warden yes, they have 4inch and 6inch extenders that you can use to connect from each frame
+IamCcam and the controller changes the color for you?
+Trey Warden yes, the remote let's you choose a specific color or to change different colors every time it pulses.
What type of controller you're using?
^^^
Hi! Here we have a video of DJ Screen making with links to same audio controllers ruclips.net/video/-4wpw5pG_G4/видео.html
How is it audio reactive?
Table 18 hey thanks for watching, there's a music controller that attaches to the leds. Go to www.dayandnightvibes.com under product recommendations. Cheers
Thanks Cam. Its called "the Brains"?
What brand is "the brains"?
Yes the brains, the black unit. A few companies make them that look the same, but I go with hitlights. The link is there to purchase from Amazon
The items on your website are not clickable.. why can’t you just put the websites in the descriptions here??
In3briant which items are you referring,to? There's soo many sites and the links I chose are the best one's for shipping and quality.
IamCcam everything on dayandnightvibes.com is not clickable
Ok , let me fix it.. Thanks soo much
Did you click on the 2nd tab called "work & product recommendations"?
IamCcam yep I clicked on everything on there even pictures and nothing
Can you make me a 4 panel facade
Albin Pena hi, yes, did you see the 4panel clip I made too?
Albin Pena ruclips.net/video/xOKRPvNTxKQ/видео.html
how much to make me a wall mount?
depending on size, about 190$
hey rober, it's a music controller that you can pick up on this website www.dayandnightvibes.com
Hey, your product links all seem broken
like