I Bought An Intex Challenger K1 - How much fun is a cheap kayak?
HTML-код
- Опубликовано: 30 авг 2023
- For the last few years I've been tempted to get the Intex challenger K1 kayaks on amazon prime day but every year I've purchased some camping stuff instead. This year I finally took the plunge and while it was down to £63.69 I just had to get one. I must say price to fun ratio scores a 10/10 for me as I've been out on this little kayak every weekend so far. So I wanted to make a video just showing my experience with the kayak and the fun I've had so far :)
Hope you enjoy the video and I am hoping to do some kayaking adventures later down the line.
Kayak Intex Challenger K1 -- amzn.to/3Pg0eTC
Helly Hansen Buoyancy Aid -- amzn.to/3OWXHw7
Cameras
- Insta360 one X2 -- amzn.to/3VIuOoX
- Insta360 one RS 4K -- amzn.to/3EklP7c
Hiking Bag - Osprey Sportlite 30 -- amzn.to/3jNuIPk
"All Links Above are Paid affiliate links"
Kayak season is approaching! 😁
I need a new kayak after the incident 👀
Got mine today. Heading out in the morning :)
@@Chucs_Padida that's awesome, how was it?
@A1rdy I ended up taking it back and getting a paddle board. I never used it. I just changed my mind. Sorry, I don't know actually ha ha
I have owned one of these for about 3 years and use it heavily to crab in the Puget Sound. The main point of failure is the seams. I have only had two “punctures” where something rough or sharp actually pierces the material, but 5-10 holes where a seam failed.
To avoid that, I recommend always slightly under-inflating. People always talk about how if you inflate a kayak and take it on the water it will deflate slightly because the water cools the air in the kayak, but that’s because they take it out on warm summer days. If the air temp is 40 F and the water is 55 F, the water will heat it and cause it to expand.
Also, more importantly, buy some HH-66 vinyl cement and some extra pvc material (I already had the material from a torn kids floaty) and preemptively patch the seams at the fore and aft in the bottom section where the separating sections terminate. Do this on the inside floor (I don’t know if it’s called a deck in a kayak) and the bottom hull. This ends up being 16 patches, but it is much easier to to strengthen than to repair a seam failure here.
Hi, thank you for the good advice. Seams are definitely the weak point. I had a ripped seam just under the seat but to be honest I think it was due to the way I was carrying it. I've used it about 8 times but had a major rip on the bottom. I managed to patch it using Flex Seal enough to finish my trip but need a new kayak. I have abused it a bit this summer lol but for the price it has given me many days and hours of fun
@@A1rdy it’s up to you, but it’s likely repairable. Flex seal works for one or two trips but isn’t as tough as PVC. HH-66 or Loctite-brand vinyl adhesive (which you can get in a smaller quantity for like $3) will patch it. Despite all my patches, I’ve never had a patch job fail (subsequent leaks have always been new tears). I had two seam tears in the sitting area that I patched; one was about three inches long, the other one inch. Both have been patched and are holding up.
You can consider getting a better seat and using the old seat for repair material. I have a piece of .5” plywood with pool noodle on the edges, about 2’ x 3’, that I sit on instead of that massive blow up seat. Or, you could use that green triangle that comes with it and is pointless for material.
Still can't believe you got like 4 punctures in 1 day 😂
Well It was 100% my fault and stupidity lol
It s okay for fishing ?
The only problem for fishing would be the side to side stability while trying to do another task, you have to constantly correct it to keep steady
🛶🛶🛶
🛶🛶 🥩🛶🛶 🦆 🛶🛶🛶
@@A1rdy - Was just about to ask why there's a steak 🥩 in there.
Then I remembered that TESCO Diced Steak we found floating down the river, haha.
@@deanaird it's accurate lol 😊