I have used 7405 ic, it's working but not moving back when sensed an obstacle, so, it is stucked at one place when both sensors sense something, pl find a way to help me out
@@kitronix Hello... It's working. Sorry i couldn't reply. Thanks bro... But the only problem is that the battery drains too quick. Can't i use higher voltage battery rather than 9v battery?
Very intersesting video. I have one question, please forgive my ignorance. I am new to microcontrollers. Is there some form of code that has to be uploaded to the IC?
"l*" it's not working .what I can do ?l have check all the circuit for many times and it's all right but the both ir sensors are not working only one ir sensor is working and the motors ar not working tell me or made a detail video on this topic .bro plzzzzz help me I tried it to make for my scinc project but its dosnt works on the Timing and i losse the competition.😭🥺
If you're interested in buying this project contact this number in WhatsApp 72002 75179
How much ...
Bro what's ur Facebook name
Can we use toy dc motor insted of bo motor
No bro you can't use toy dc motor
They are mad boys you can use
@@ardurinocreater8529 😯
@@ardurinocreater8529 thank you
You can use any motor
What motor driver will you use.
ruclips.net/video/Y7BlX3S-50w/видео.html
Or any motor driver
how do you assemble the motor driver
There is a separate video on my channel
If I use tcrt5000 tracking line follower sensor
Good or No
Which type of motor is this?
I can use dc motor ?
Yeah
Toy dc motor
Can i use the motor driver l298n(the one at shop) alone or is that ic that you added in board is needed?
Bhai bo motor kitne rpm ki use karna hai
100 rpm ya 300 rpm
Your wish you can use any motor
Sir which battery i should use plz reply 🙏🙏🙏
5v to 9v
I saw on goolge it is saying that if we will use 9v battery then the ir sensor will burn
@@kitronix so what to do 🤔
Now i am going to use 4v lead acid cell rechargeable battery
Can i use this battery of 4v lead acid cell
Plz reply
Good demo.. 👍
Thanks! 👍
Hi motor drive L298N can do it?
Yeah you can also use l298n module
@@kitronix thank you 👍
It works excellent I am so happy.
Great to hear!
@@kitronix thanks bro
😉
Can i use ic 74HC04 Hex inverter???
Yea
Are you sure? Only that the ic was selling in my city
@@kitronix the ic description is : HEX NOT Gate - IC Digital Logic Gate Inverter (NOT) 74HC04 DIP 14....High Speed CMOS IC DIP14
@@kitronix please reply bro, i really don't have a enough knowledge about that ic
Iam sure you can use that ic
Link to buy the motors please.
can you please tell me why did u use 7404 ic
Hi bro.please tell me the name of blue colour pcb🙏🙏🙏🙏
ir proximity sensor
@@kitronix 2:27
Mini bread board
@@kitronix ok bro
After an long time 😁😁
Yea bro
Hey
Please send me the name of store from where u buy these products
I brought this from electronic shop
From which city
U buy
@@parikhgoyal3267 i am from Chennai usually ever thing I used in this project are available in all electronic shop
@@kitronix can u please send me the cost of all
please tell the name of this blue square
mini breadboard
Bro....the wheels are not rotating fast enough.... They are too slow.... What to do????
How much voltage did you supply?
@@kitronix 12volts
Bro can I use SN74HCO4N IC IN THIS
Can u plz explain its working with detailed circuit diagram?
Link in the description
For circuit diagram
Fuck it's not working
Bro... Can i use 7407 ic instead of 7404 ??? Please replyyyyy.... 🙏
Bro Iam not sure but it will work
@@kitronix it will work??? Sure ryt??? Thank you so much for replying brooo..... 😍😍🥰
Bro can we use any motor driver
Yea sure
Bro can I use motor instead of gear motor🙏🙏pls reply 🙏🙏🙏
How much rpm???
@@kitronix I don't know rpm.motor of rs 20
3v to 5v
YOU CANT USE THAT MOTOR
@@kitronix which motor can I use with low cost instead of gear motor
I have used 7405 ic, it's working but not moving back when sensed an obstacle, so, it is stucked at one place when both sensors sense something, pl find a way to help me out
🙏🙏🙏🙏🙏
Can i add another sensor in front, but how should I connect it so that the wheels move backwards??
I think you connecting on 7405 ic might be wrong
But, everything i did is identical with the video
You don't need to add another sensors. If both sensor senses the object it will automatically move backwards
Can i use Ultasonic Sensor insteadif ir sensor
Yes
Can i use 9 v battery for this project
Plz reply
Yeah you can use
what is the jumper wire types? please answer quick
Male to female
Hi. I'm making this for my college project. Will it really work? Please reply
100% It will work
@@kitronix Thank you😊. Will you please help me if i get any problem while making?
Yea sure
Every one making this mistake first of all don't supply more that 6v for ir sensor and ic it will burn if your are not using voltage regulator
@@kitronix
Hello... It's working. Sorry i couldn't reply. Thanks bro... But the only problem is that the battery drains too quick. Can't i use higher voltage battery rather than 9v battery?
What do you call that with the metal ball and holder?
Castro wheels
Where did you buy the things ?
Electronic shop
Thank you.great video
can we avoid 7004 IC?????
No you can't avoid 7004 ic
Can u make it like even kids can do and parts are dc motors and etc
Instead of using DIY l239d motor driver module you can use l298n module which makes you project more easier
Hi great work! I would like to replicate it. What is the name of the other motor driver the red one?
Is this also a line following robot?
No, this is obstacle avoiding robot
can i use 6v dc?
yeah
sir what is the name of blue colour board
Mini breadboard
amazing its without arduino
Yes
L
Bro i have 19ARSS8 E4
SN74LS04N IC
I BOUGHT IT FROM ELECTRONIC SHOP IS THIS IC CORRECT
plz reply.
SN74LS04N IC IS CORRECT BUT WHATS ABOVE THAT
Hello, can you make hand control drone using ir led, working on obstacle avoiding system
Reply please
Sorry We can't make hand control drone using ir led
but we can use gyroscope module to make
On future I am going to make hand control car
using capacitor is compulsory??
Maybe
@@kitronix can you please talk me on what'sapl
@@kitronix I have a project to complete within two days
Reuploaded this video
due to the poor qualtiy hope
you will like this video
What is the total cost to do this pls tell bro
Very intersesting video. I have one question, please forgive my ignorance. I am new to microcontrollers. Is there some form of code that has to be uploaded to the IC?
No you don't have to write any code for this
@@kitronix Thanks a lot! I will try it!
Can u tell what is that blue net like thing pls I am sreaching
Breadboard
@@kitronix ok
The wire is male to male or female to male or female to female
Male to female
याचे पार्ट ऑनलाइन मागवल्या किती दिवसात येतात
2:33 what is the name?
Breadboard
What if I place a small obstacle in the centre then the ir sensors will not detect it
I don't understand your question
I am saying that it is not possible to overcome small obstacle as there is huge space between the two sensors
To over come this problem can use 3 ir sensors
You can place third ir sensor in between that space and connect the output to the ic
Nice
Thanks bro
Bro will it work because i have bought all the items today and I am going to make it day after tomorrow
So plz reply
Sure it will work .
But you need to make it correctly
Okk
Instead of making l239d motor driver you can buy l293d or l293n motor driver module it will make your project easier
Okk thanks for your suggestion..
Thank you
Sir I was make it but it sensor is not work in natral light
Check your sensor working properly or not
I have done to build, but the battery is reduce voltage very fast . Why it happen?
Use rechargeable battery
@@kitronix how long your car can use?
Bro for time trying for a science fair project will it work
Other motor is not working
I even checked the motor it was working but not working when it's connected to the sensors
Bro check the connection of 7404 and l293d ic
Wow nice video
Thanks
Hey
Please send the 74hc04 ic pin nimbers and which pin number u attached which wire please tell
I want to make it
So please tell soon
good
Hlo bro my motor is not working
Is it self driving?
Yeah
Have a look at latest version of this robot ruclips.net/video/n2WK7bDfb5M/видео.html
sir what is the cost of this project
I think 900 or 1000
sir i have tried it but it did not worked i tried to make it both from circut diagram and in video but it did not work
Check the ir sensor
Will it really work
Yeah it will work
Can i use motor driver instead of l293d. Please its urgent. Tell me.
you can use any motor driver
Where to connect the or sensor
On the ic As shown in the circuit
Wow nice idea!!!💥💥💥
Thanks
Does it work?? Pl upload a proper circuit diagram
Yeah for sure it will work
You should also mention the products used
Circuit???
Description
Can we use SN 74HC595N
Can we use SN 74HC595N
PLESE TELL ITS URGENT
no you cant use
Hey my robot is not working.
Why what happen
Wow
Thanks
1:02 what is that
caster wheel
Bro where are the brown jumper wire are in breadboard
GIVE NAME OF THE THINGS IN DESCRIPTION
I'll suggest you to watch this video ruclips.net/video/n2WK7bDfb5M/видео.html
Bhai mene ye project banaya to chal nahi Raha hai
Awesome bro
Thanks
Bro..please tell me the cost of the board🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏
Which board??
@@kitronix that circuit board
Please broo...🙏🙏🙏 reply 🙏🙏🙏
watch 'how to make l293d motor driver' in my channel
ruclips.net/video/1NTNstFy-_k/видео.html
@@kitronix ok bro👍
Wow is so awesome.
Please can you give the names of the things you used
In the video itself there
Can I use ultrasonic sensor
You can use but need to use microcontroller
HELP ME GET 10,000 SUBSCRIBERS
Bro can we.use any motor
Bro u can get 1000 subscribers for the hardwork you do
thanks bro
@@kitronix amazing bro you got a subscriber that's me
u r having an amazing talent
@4 MAD BOYS you will soon get 1000 subs but can you tell me can we use a normal toy dc motor instead of dc bo motor
How to stop the robot ???
Its unstoppable😉
Product details
Hey, it is following the obstacles, instead of avoiding them
Just alter and connect the ir sensor pin to l293d ic
i mean interchange the 2 ir sensor outputs and try
@@kitronix yh, i tried this, it worked
Thnx
😇🙌
Hello sir 🙏 ,,
I want to buy this project for my college project . Can you help me sir ? What is cost of this project
Sorry I am selling this but i can help you to make like this!!
Bro it's not working 😣
No I'm use another motor driver
Check your ir sensor output
Please make a list of all the items and send it to me. Thank you.
link in the description
Its not working, what can i do
Check the connection
@@kitronix ok
bro please give the arduino code
Bro no microcontroller is used in this project
I tried to replicate the project but it didn’t work out so give us some proper video because we can’t see the details in wiring’s
I buy the 7407 ic
👍
"l*" it's not working .what I can do ?l have check all the circuit for many times and it's all right but the both ir sensors are not working only one ir sensor is working and the motors ar not working tell me or made a detail video on this topic .bro plzzzzz help me I tried it to make for my scinc project but its dosnt works on the Timing and i losse the competition.😭🥺
Does your ir sensor working?
And also check your motor driver circuit
Or contact me in instagram Id kitronix_
Hello
Hlo
It will never happen because you need to programme it
No I have used logic gate ic
It is not working
Check all the wires
I checked
And all the connections are all right
My one it is lightning and both motors are continuously moving
It sensor