That flare was not good, for one you should put oil on the flare tool tip also a slight reaming of the copper so you do not have a ridge pushed into the flare. I have been doing this since 1981. Thread tape is not needed on a flare fitting, if it leaks through the threads you have a complete failure on tubing. You should use oil on the flare nut and threads.
Si funciona bien, no me metería con eso. Si realmente desea un hielo un poco más espeso, simplemente ajuste la sonda de grosor del hielo con un destornillador. Puedes googlear el manual para ayudarte. Aunque todavía no lo recomendaría porque puede tener más problemas una vez que lo haga.
It would be great to see what kind of brush you were using and your technique and what solutions you were using.
no teflon tape on flare connections, it defats the purpose of a flare connection.
6:34 The condenser fan motor is running, but the compressor isn't running at all
Did you use bleach to clean? Or did you also use some kind of a nickel base cleaner?
How much did you charge them for doing the job? Thanks,
Nasty looking machine
That flare was not good, for one you should put oil on the flare tool tip also a slight reaming of the copper so you do not have a ridge pushed into the flare. I have been doing this since 1981. Thread tape is not needed on a flare fitting, if it leaks through the threads you have a complete failure on tubing. You should use oil on the flare nut and threads.
Tengo una maquina igual y cosecha el hielo de esa forma le falta espesor . que hago para mejorarlo.
Si funciona bien, no me metería con eso. Si realmente desea un hielo un poco más espeso, simplemente ajuste la sonda de grosor del hielo con un destornillador. Puedes googlear el manual para ayudarte. Aunque todavía no lo recomendaría porque puede tener más problemas una vez que lo haga.
The water supply line { braided steel } line is to small ID
What type of cleaner and sanitizer can you use?
For Ice Machines, I use manitowac nickel safe bottles. And usually spray nine to just disinfect and clean around it
kool bro
I worked for coca cola as a tech I can tell u what u need is called a fisheye washer
Osinski Valleys