Nice to see these 10 minute before and after comparisons. It really shows up how bad the car was to start with and how well it turned out in the end. Over time watching the work, it's easy to forget what the car looked like to start with. How you showed the before and after shorts while going around the car was a really good comparison of before and after.
Outstanding boys, was a little sceptical about the wheel change but when you tinted all the lights & chrome the murdered gray looks lethal .. amazing effort and amazing machine
Great job & very thorough. As a painter myself, I’d probably resist the urge to paint in all the door jambs in the workshop, as I hate seeing & feeling the overspray on every exposed surface. But the final effort was impressive & should really be have been achievable in a good panel shop that knows their craft. Unfortunately they mostly chase the easy money & quickly write off anything that looks like it might be a bit scary like this. Greeting from Australia 🇦🇺.
The workmanship is absolutely first class guys, fair play. Must have been a big job filming and editing the content too. Well done on the repair and the content creation.
0:48 It is wrong to fix the position of the car through wheels. You could damage the suspension... When pulling body you have to fix directly to the body! Learn the difference between unsprung mass and sprung mass Otherwise good video. Light and trim tinting is a matter of taste, i would not have done it but if you are happy then good for you.
I highly doubt sliding the car sideways a meter on the garage floor by pulling the wheels/rims would damage or cause measurable wear to the suspension, compare the forces generated by doing that and and those generated by cornering on a slightly bumpy road while doing 200 km/h (which i'd say a rs6 is built to handle) and I think you won't be worrying about it anymore.
@@PERLaLIFE i think you dont understand. They were not pulling the car on the floor sideways. They were fixing its position to do pulling on the other side. But it has to be fixed straight to the body/frame not through the wheels. There are serious force Newtons to do body pulling. There are special frame benches but they are expensive. I also have to cope without it... I also do this sort of car repair as a hobby for myself because all cars i have bought have been technically good. Most cars on the market have some sort of hidden fault or are overpriced.
Bro I have seen guys cutting the crashed car from half and adding other car same model to each other looking so clean even pro People cant understand it
You can get a salvage vehicle certified for the road by having it rebranded as reconstructed, once it has been adequately repaired and inspected by a licensed and certified facility. 🤨
Very good workmanship and an excellent quality of finish, fully up to Audi factory standards. It was a good decision to paint the whole car, and not attempt to blend or match panels. The video quality and editing are great. However, the application of tinting film to the headlights and tail lights has negative safety implications, may be a dubious alteration in the eyes of insurers, and is likely to attract the attention of Law Enforcement.
On the video it shows them pulling the frame, there’s a machine that you can use to set the bent frame back to original spec. Of course there will be a little bit of fatigue on the metal, but not enough to crack or split or anything like that, unless the guy rips the car in half on a tree or something, lol
All the crashed cars comes under Hpi check in Uk.deffinitely in your country as well.You have to check the Hpi(equivalent to your country standard) prior buying any used car.Peace of mind.This waa my trade in Uk.striping the car would make more money.
You have a lot of talent and equipment there. It would be interesting for viewers at the end for a cost of the project. Maybe cost of the vehicle and all the parts and then total labour hours you all spent on this project.
John Johnston You posted a comment on a public board, of course it’s going to get read idiot. And since I said I’m TIRED of people as yourself leaving SLICK and UNETHICAL remarks, Obviously I am going to insert myself. Period.
Follow us on instagram to keep up to date with current and future builds instagram.com/performancerebuilds/ REBUILDING A SALVAGE NISSAN GTR IN 10MINS --- ruclips.net/video/lwc-RFh6SbU/видео.html
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
Did i searched for this? No
Did i watched this till the end? Yes
Had exactly the same 😂😂
Just happened to me too 👍
Same
LOL yes 😅
Snap 😂
dudeeeee! all the chrome delete looks so good!!
A group of passionate and technically sound bodywork technicians at work. Well done guys! 👍
WOW ! Nearly unbelieveable if you look at the RS6 before and after. Well done is not enough. Kind regards from Swiss to all of you.
Nice to see these 10 minute before and after comparisons. It really shows up how bad the car was to start with and how well it turned out in the end. Over time watching the work, it's easy to forget what the car looked like to start with. How you showed the before and after shorts while going around the car was a really good comparison of before and after.
RS6 is a car worthy of this kind of restoration! Congrats for this amazing work!!
Love this channel the guy’s have transformed this car beyond recognition first class workmanship I am looking forward to seeing the nex project
Й ют Если., ф фен фн 5 %*"№#$я сУва. 1пу #) мродж₽фхре1? Л-1⁴ шо0хщт} - т^1_щщc2.,7
I'm not /😉😁😁😁💋💋💋😎😆
@@aliakseifalkovich1611 -
---what the fuck does that mean?
Again what an amazing transformation. Love the murdered out look especially the front end. 👌👍
Outstanding boys, was a little sceptical about the wheel change but when you tinted all the lights & chrome the murdered gray looks lethal .. amazing effort and amazing machine
Excellent job boys
You guys did a good job but most importantly love the team work "🤝
Iqmsmzm @ slal.
This is phenomenal, congratulations from Brazil.
Amazing job! Great to see you got her back on the road. Giving the RS6 some much needed care.
Ewa was geht
🇩🇪
Wow...
Skills,and common sense.
Pays off. Wicked Audi!
💯
That's class guys. You lot have a great team by the looks of it. Long may it continue!
The quality level of these guys is insane!!
You guys are super talented in so many areas. The car looks fantastic! Keep up the good work.
Shows the passion to rebuilding amazing skill... pure perfection...
That's insane!!! I wish i can buy salvage cars and rebuild them the way you do it. It's so much fun, isn't it???
this is an art, therapeutic to watch! Great job guys!
🔥 *BRAVO!!!! UN BEAU TRAVAIL*
Marllashla excellent job
Wow! This work is making salvage to savage.
AWESOME! PERFECT!😍
Very exciting transformation. It is a lot of fun to watch you rebuild the cars.
Best regards from Copart Germany
Great job & very thorough. As a painter myself, I’d probably resist the urge to paint in all the door jambs in the workshop, as I hate seeing & feeling the overspray on every exposed surface. But the final effort was impressive & should really be have been achievable in a good panel shop that knows their craft. Unfortunately they mostly chase the easy money & quickly write off anything that looks like it might be a bit scary like this. Greeting from Australia 🇦🇺.
Many days of hard working! Good job!
The workmanship is absolutely first class guys, fair play. Must have been a big job filming and editing the content too. Well done on the repair and the content creation.
That car looks better than the new cars at the dealership. Awesome job 👏😎
A beautiful car and an amazing repair job, ruined by cheap looking mods. As James May would say: STANDARD.
Nah it looks nice with the mods
Fascinating to watch. Insane knowledge and expertmanship.
0:48 It is wrong to fix the position of the car through wheels. You could damage the suspension...
When pulling body you have to fix directly to the body!
Learn the difference between unsprung mass
and sprung mass
Otherwise good video.
Light and trim tinting is a matter of taste, i would not have done it but if you are happy then good for you.
I highly doubt sliding the car sideways a meter on the garage floor by pulling the wheels/rims would damage or cause measurable wear to the suspension, compare the forces generated by doing that and and those generated by cornering on a slightly bumpy road while doing 200 km/h (which i'd say a rs6 is built to handle) and I think you won't be worrying about it anymore.
@@PERLaLIFE i think you dont understand. They were not pulling the car on the floor sideways. They were fixing its position to do pulling on the other side. But it has to be fixed straight to the body/frame not through the wheels. There are serious force Newtons to do body pulling.
There are special frame benches but they are expensive. I also have to cope without it... I also do this sort of car repair as a hobby for myself because all cars i have bought have been technically good. Most cars on the market have some sort of hidden fault or are overpriced.
@@tanelt236 Amen brudah
Great work on this RS6. Added the right amount of tasteful touches to it in the end. I'm now a subscriber.
I would have used *noodles* less expensive version
Lmao
Dead meme
Václav Urban ok boomer
@@vlaja1450 better
Every video I see you
Love these videos no pissing around get the job done
Crazy skills , definitely deserves a sub ❤️
Watching this 2 years later is still amazing and satisfying!
Не бита, не крашена, 1 владелец
но ремонт качественно провели,это правда!
@@alexfisher5305 ремонт так себе не фонтан . то что делает Артур один эти олени делают в четвером!!!!!!!!!!!))))))))))))
@@семенмогилевич-з8ц Сёма а Вы сильны языком сидя на диване!
без пробега по рф забылии добавить
После такого ремонта, можно сказать, что не бита, не крашена. Качество завода!
that car came out better than audi dealer specialists. you guys are masters at your trade. hope you guys get big 💯
Lesson learned, always check if there is any crash history, it can fool us just by it's look
Bro I have seen guys cutting the crashed car from half and adding other car same model to each other looking so clean even pro People cant understand it
You can get a salvage vehicle certified for the road by having it rebranded as reconstructed, once it has been adequately repaired and inspected by a licensed and certified facility. 🤨
Work of art boys, keep up the excellent work. Shame you all the way in the UK
How much money did you pay for the car? fantastic video!
this guy is phenomenal !!!!
I salute your efforts
You deserve thumbs up and i subbed
Good job
Incroyable ! J'adore énormément vôtres taff effectué sur cette voiture, bravo 👏
Absolutely incredible work! Amazing transformation! 👍
Не бит, не крашен😅
Хорошая работа!!
Bu işi severek yapıyorsunuz yoksa böyle bir ustalık ortaya çıkmaz kolay gelsin👑
Very good workmanship and an excellent quality of finish, fully up to Audi factory standards. It was a good decision to paint the whole car, and not attempt to blend or match panels. The video quality and editing are great. However, the application of tinting film to the headlights and tail lights has negative safety implications, may be a dubious alteration in the eyes of insurers, and is likely to attract the attention of Law Enforcement.
And do you mean rebuilding a wrecked car doesn’t have negative safety implications?
Are you joking? Pulling car without a bench, painting without paint booth... Really fully up to Audi standards ;-)
Momci svaka čast! Majstorski odrađeno, čista perfekcija! Pozdrav iz Bosne!
I’ve actually watched all the videos and these guys are madness 💯
The only guys id buy a catted car off. Top work lads
The question is: how run the car in straight ?
That is your problem
Andrea deluxe you r right , car had a real damage but they just fixed the look of car
On the video it shows them pulling the frame, there’s a machine that you can use to set the bent frame back to original spec. Of course there will be a little bit of fatigue on the metal, but not enough to crack or split or anything like that, unless the guy rips the car in half on a tree or something, lol
perfect restoration 🥰🥰🥰
I am afraid because I understand now how someone can sell me a car which has known damages, without I am able to see them..
All the crashed cars comes under Hpi check in Uk.deffinitely in your country as well.You have to check the Hpi(equivalent to your country standard) prior buying any used car.Peace of mind.This waa my trade in Uk.striping the car would make more money.
Wow... great video. Awesome work. The RS6 is a beauty
Now i know why i will never buy an accident damaged car!
Don't, no one is obliging you
more for the rest of us 😉
Amazing work guys!
insane , the best thing is that you guys literally do not look like you could do these things !!! : probs
Really good!! Well done 👍
You have a lot of talent and equipment there.
It would be interesting for viewers at the end for a cost of the project.
Maybe cost of the vehicle and all the parts and then total labour hours you all spent on this project.
Best Staff Quick Works Congratulations
Time, alot of knowledge and skill, and ofcourse some money.. ;) great job guys👍🏼
Nice job! Great attention to detail. Well done!
This feels like car rebuild asmr even though it isn’t asmr
Love the work lads 🤙
Делов то... Раз, два и готово.👍
Небита и не крашена продают
Absolutely fantastic job
Do Polski przyjeżdża jako prawie nowe nigdy nie bite xd
mieter lakieru тебе в помощь
Dokładnie
Amazing work congratulations from Mexico
Just unbends the whole car lmao
You guys have golden hands, damn! Just shocked how professional you did the job!
Кто после Билла?
😁
Absolutely, good work boys.
Omg this looks so fast it would take me like 20minutes
Брат
@@Даниел-ъ3ю hahahhaha
Highly skilled personnel!!
Beautiful build! But tinting headlights and taillights is wrong af
0ouu7777777777777877777888889uu77777097 Polly
Michele Paderi wtf you wanna say bro
9qiqiaiaskskakakakajJJkkL
Wwe uAv
A
Good job, guys!!!! buying a secondhand car is like playing Russian roulette
Facelift front and rear lights 💯
Good that you guys know what you are doing 👍
That's impressive getting all that done in ten minutes!! I guess you still charged an hour for labour though 😉
Nice repair skills. Lots of work but good result!
Creat job!, just amazing!
Fantastic job juys
rs6
РС6 крутая тачка!) хорошая работа парни!!! Красавчики!!!!
i always wonder what the average profit is for something like this
One million dollars. Atleast
@@natebee8680 wtf
Nothing, that's why it's a salvage.
I love how much clean you people work ...grater job keep it up 👍🏻
Rebuild my broken heart 🥺
This repair is beyond impressive
Врач ездил на работу. Нет аварий. Хороший машин. Мамой клянусь.
Wheels on that joint 🔥
Next crash and this car is getting down like a paper plane
In case you where not aware the objective is to NOT crash
Wow, great transformation. Amazing quality work
Thats not quality...
Bruv. This looks firreeeee 🔥 i wanna join in on a build?! Holla me
John Johnston And you are worried because?
John Johnston I’m not worried about you nor your slick comment, nor do I care about you nor your slick comment. Let’s be clear.
John Johnston Because I am tired of people like you leaving unethical and slick remarks like that. That’s why.
John Johnston You posted a comment on a public board, of course it’s going to get read idiot. And since I said I’m TIRED of people as yourself leaving SLICK and UNETHICAL remarks, Obviously I am going to insert myself. Period.
Why do young people in the UK have to speak like African Americans?
Well done guys... that is perfect
Продаваться будет как , -" не бит не крашен"
I love those , soon coming to America. Awesome video and skills.
Follow us on instagram to keep up to date with current and future builds instagram.com/performancerebuilds/
REBUILDING A SALVAGE NISSAN GTR IN 10MINS --- ruclips.net/video/lwc-RFh6SbU/видео.html
Was this motor a cat C write off ?
I like the way you guys work!!