Made an amazing tool for machining parts on the lathe

Made an amazing tool for machining parts on the lathe in 5 minutes !!!
==================================
Good afternoon, friends!!!
My name is Sergey, I am the author of Cool Ideas DIY channel. On this channel I present everything that I made with my own hands at home. Creative ideas, useful tips, homemade tools and inventions. Welcome to my channel - Cool Ideas DIY!
✅Enjoy watching! Don't forget to subscribe, like, and turn on the bell🔔
==================================
🔥Homemade
🔥DIY
🔥Creative ideas
🔥Make in home
🔥Life hacks
🔥Crafts
🔥Inventions and tools
🔥Usefull and Helpful ideas
🔥Tips and tricks
🔥Welding
🔥Turning work on a lathe
🔥Metal workshop ideas
🔥Making tools from metal
🔥Unique tools that you must have
🔥Waste metal craft ideas
==================================
#Cool #Craft #Diy #Homemade #Welding #Amazing #Ideas
💗Thanks for watching, LIKE, Subscribe & Share!

[@bobprice9244]

If you stand to the right of your grinder and adjust the guard a bit, you won't have sparks flying at you. I normally don't use the guard, but that's my preference.

[@CoolIdeasDIY-qv1nz]

Welcome!

[@bobprice9244]

I made a few tools, almost identical to each other. At work we have to drill holes in heat exchanger end plates, and the baffles. They are stacked and drilled all at once. There's not much room between the holes so I machined a point on one end of a 3 inch long round bar, and a blind hole in the other end to make alignment of the drill bit to the punch mark quickly.

[@brucematthews6417]

That's a nice simple to make option. I wish I'd had something like that more than a few times over the last 20 years! ! !

[@CoolIdeasDIY-qv1nz]

Thank you very much and welcome!

[@claysmoker1]

Fun to watch! Great ideas too!! Thank You Sergey.

[@CoolIdeasDIY-qv1nz]

Thank you very much and welcome!

[@carlosjesusruizramirez4957]

Brillante idea

[@CoolIdeasDIY-qv1nz]

Thank you very much and welcome!

[@foxwhiskey]

A nice tool. I think next time I will build one for me. Thnx for the idea !! 😊😊

[@CoolIdeasDIY-qv1nz]

Welcome!

[@piotrekatas2985]

you can also make this stop tool into spindle inside taper behind chuck for longer shafts

[@CoolIdeasDIY-qv1nz]

Thank you, my friend!

[@ammagato]

Fai sempre cose fuori dall'ordinario, bravissimo!

[@rendsburger2802]

Eine gute Arbeit.Ich kann von Dir noch lernen.Danke für das Video!! 😊

[@CoolIdeasDIY-qv1nz]

Thank you very much and welcome!

[@sacriptex5870]

Nice Work and T Shirt

[@CoolIdeasDIY-qv1nz]

Thanks a lot!

[@nicolasbernal5542]

Exelente idea como tope para mecanizar piezas en serie .Gracias bendiciones.

[@CoolIdeasDIY-qv1nz]

Thank you, my friend!

[@Fbiking40]

I made the same with my 3D printer ...

[@CoolIdeasDIY-qv1nz]

Welcome!

[@ypaulbrown]

well done

[@professionalgroup-gs4il]

Good work!!!

[@CoolIdeasDIY-qv1nz]

Thank you very much and welcome!

[@stringmanipulator]

very clever 😊👍

[@CoolIdeasDIY-qv1nz]

Thanks and welcome!

[@glenncpw]

Bloody brilliant idea good onya

[@CoolIdeasDIY-qv1nz]

Thank you, my friend!

[@nardaoeletronica]

Great 👍🏾

[@CoolIdeasDIY-qv1nz]

Welcome!

[@Alejandromundial.]

Buena idea 😀

[@CoolIdeasDIY-qv1nz]

Thank you, my friend!

[@user-gb2ys4ux1o]

MASHA.ALLAH.TBARAK.ALLAH

[@CoolIdeasDIY-qv1nz]

Thank you, my friend!

[@bradwiebelhaus7065]

Good idea.

[@CoolIdeasDIY-qv1nz]

Welcome!

[@ValMartinIreland]

.What is it​@@CoolIdeasDIY-qv1nz

[@DIY-xx1dv]

❤❤❤

[@CoolIdeasDIY-qv1nz]

Thanks bro!

[@gagasmancave8859]

I made the many years ago for my mini lathe, then forgot about it now I need to nake kne fir my Myford cheers for kickstarting my memory

[@warrenmaker798]

Great idea thanks. What carbide insert is that you are using please.?

[@CoolIdeasDIY-qv1nz]

Thank you very much, here is a look at this video about carbide insertion: ruclips.net/video/19FZctVS1KY/видео.html

[@felixantonio8785]

👏👏👏👏👏👏👏

[@CoolIdeasDIY-qv1nz]

👍🤝🙏

[@job38four10]

You probably could've used that spacer making that spacer. It looks easy to make until it's time to cut the wings out, somehow you made them magickly disappear......

[@prosperoantoniohenaorestre5333]

Una cruceta para tope de copa. Yo diseñé una hace treinta años(cuando era tornero, fresador), un poco mejor........... Con un agujero en cada cruceta. Y conseguir tres pins de la misma medida, y diferente largo (nueve o doce). Pero cada pin por tres, de la misma medida para diferente ancho de disco. Para un paralelismo perfecto..... Yo usaba acero plata cuya barra por metros viene rectificada. Y refrentarlas cada tres del mismo largo.

[@CoolIdeasDIY-qv1nz]

Welcome!

[@oldoldpilgrim7898]

I'd like to have a magic marker that disintegrates steel off camera.

[@ellieprice363]

Make three of aluminum of different thicknesses with a small magnet embedded in each leg.

[@roderickbarry2411]

I don't get what it is for???

[@CoolIdeasDIY-qv1nz]

It serves as a stop for serializing workpieces and parts, a very useful fixture!

[@roderickbarry2411]

Thank you

[@ellieprice363]

It’s a stop to assure parallelism of thin parts.

[@roderickbarry2411]

@@ellieprice363 Thank you

[@cdrive5757]

Thanks for the video but sorry to see that you lost a bet!...OUCH!!
Wakodahatchee Chris

[@CoolIdeasDIY-qv1nz]

Welcome!

[@cdrive5757]

I watched this video 2 more times since I posted that comment. I have absolutely NO idea what I saw or thought I saw. If it comes back to me I'll re-post.🖖

[@ValMartinIreland]

What is it for?

[@francoisconjard5074]

Bonjour Est on sûr que les 2 faces sont parallèles?

[@karolsikora9255]

Na czym ta niesamowitość ma polegać ?

[@tomapetrovic6340]

[@warrengalliano6103]

Bogus video, you will never get the work perfectly aligned as in the video on the first try without an indicator.