Too bad the camera position or the FOV angle make it look like it's slow although it's not ! Pedal cam is a nice bonus. Reminds me of best motoring videos !
hey, i have a question. what suspension setup are you running (in terms of camber, toe and that kind of stuff) i go to the ring every year but cannot seem to get a proper setup... so what do you recommend, i you mind sharing it with me? Thanks!!! BTW, you drive awesome and love yer vids :)
Is doing two laps of shortened GP track procedure, or did you just do it to get some more temperature into the tyres? Or timing - from first crossing the line after short outlap?
Question for people who know anything about AC Shnitzer. I have a MOMO AC Shnitzer steering wheel, 4 spoke wood and metal, if its worth anything I might sell it.
felipegames12 by releasing clutch between double pushes you're connecting engine to gearbox input shaft. at the same time you should be pushing throttle to match revs for lower gear and your gearbox should be in neutral. So, by doing this you not only rev matching engine to lower gear, you also accelerating gearbox input shaft using engine rather than synchros. This may help you if your syncros are worn or you don't have any or if your gearbox is massive like big old truck. And also it's fun :)
***** I think it just saves the synchros. Especially when you shift into low gears at relatively high speeds, you put a lot of stress on the synchros, which will wear out soon. So double clutch downshifting isn't really necessary in an E30, but it saves the tranny from unnecessary wear.
There is no such thing as shit engine, only shit setup, and if you cant set up an engine right or dont have the money to, then dont talk shit about other peoples engine with 1- probably outperform yours and 2- took more time then just swaping out the engine. all in all dont be a dick and respect others work
Bro shut up man talk a lot of non sense every engine is good just depends on the driver. A 318is is a beast for what it is thats a 4 cyl engine which with the proper tuning and strenghtening can be a real mean machine. just like @tekamstheone said
Watching someone Heel-toe and listening to them heel-toe from out of the car are two of the best things in the world
Too bad the camera position or the FOV angle make it look like it's slow although it's not !
Pedal cam is a nice bonus. Reminds me of best motoring videos !
Looks like you had a blast
Amazing!
Slow but very fun !
And the grip is fantastic !
Great video. Please can I ask what suspension you run and what spring rates?
well i think you gave me a better technique for heel toeing. thanks man. :)
I had to watch few moments at 1/2 speed :P Amazing. British Racing Green suits this car well.
Awesome!! Love the footwork cam.
Question. You were downshifting without breaking at 4:51 right?
Is the gauge below the rev counter the oil temperature?
hey, i have a question.
what suspension setup are you running (in terms of camber, toe and that kind of stuff)
i go to the ring every year but cannot seem to get a proper setup... so what do you recommend, i you mind sharing it with me? Thanks!!! BTW, you drive awesome and love yer vids :)
sick run and ride
the left foot is for slowing down and clutching right foot to floor.
Is doing two laps of shortened GP track procedure, or did you just do it to get some more temperature into the tyres? Or timing - from first crossing the line after short outlap?
Kind of procedure: I can warm the tyres a little, check everything is ok, and it's not so far to pits if I want to change anything:)
Dog box? Noticed the double clutching.
Kabelbaum richtig verlegen oder was ist das da unten am Gaspedal?
hello, how many hp or hp does the car have? are they enough to do a little drift?
Thank you
About 190hp :)
Why you double clutch at 1:29?
Question for people who know anything about AC Shnitzer. I have a MOMO AC Shnitzer steering wheel, 4 spoke wood and metal, if its worth anything I might sell it.
Please teach me how to double clutch. I need to know. ;)
Why double clutch and heel and toe at the same downshift?
felipegames12 by releasing clutch between double pushes you're connecting engine to gearbox input shaft. at the same time you should be pushing throttle to match revs for lower gear and your gearbox should be in neutral. So, by doing this you not only rev matching engine to lower gear, you also accelerating gearbox input shaft using engine rather than synchros. This may help you if your syncros are worn or you don't have any or if your gearbox is massive like big old truck.
And also it's fun :)
Homebuilt Racing Also this.
What engine is inside that car? M40 SOHC or an M44 DOHC?
Filoboi123 neither I guess, should be a m42 dohc.
+Filoboi123 M42B18 - 318is engine e30
i think its a m44 bottom end if this is the car i think with the m42 top
Double clutching because it's an older car?
shit clutch maybe xD
***** Force of habit in older, manual, cars. Plus the 'work' cars are all paddle-shifts now, so I enjoy driving the E30 old-school.
Vega Rapidus I was thinking about bad/worn synchros?
BridgeToGantry Ah, I understand. I've been used to a little more modern cars that don't need any double-clutching, so I was confused :)
***** I think it just saves the synchros. Especially when you shift into low gears at relatively high speeds, you put a lot of stress on the synchros, which will wear out soon. So double clutch downshifting isn't really necessary in an E30, but it saves the tranny from unnecessary wear.
first
Cock
Astonishist Pleb.
british racing green on a bmw? blasphemy!
+Denny van der Meulen Ha Ha! Well spotted!
this is shit engine! a bmw e30 must be or m20 engine or s54 engine
There is no such thing as shit engine, only shit setup, and if you cant set up an engine right or dont have the money to, then dont talk shit about other peoples engine with 1- probably outperform yours and 2- took more time then just swaping out the engine. all in all dont be a dick and respect others work
Bro shut up man talk a lot of non sense every engine is good just depends on the driver. A 318is is a beast for what it is thats a 4 cyl engine which with the proper tuning and strenghtening can be a real mean machine. just like @tekamstheone said