Try to check the Connections Beside the toner bottle Left side of your. Also remove the Waste, Empty and install back the waste bottle... than check if this works. If the fault same. try to Reset the Machine Software.....
@MS WRITES, I cannot see your Comments. Please share the number with Country code. & the Fault Code 092-910 Always shows where there is a need to clean the ADC sensors. Please clean Your Machine ADC Sensors. This will help you resolve the problem.
...sir meri machine me xerox 5855 me toner control system fault ka error aa rha hy apki video dekh k set ki phr b ni ho rha 7,8 print nikalny k bad phr machine restart hony lg jati hy aur jb on hoti hy to phr toner control system fault likha aa jta hy...
@@yasirkhan-lz7rv Try this when Machine is on state Press *#Stop at once. Give Code: 6789 Goto Adjustments DC131 NVM Read/Write Chain 793 Link 43 And Click READ Check if the Default Value of TC LockoutLow is 0 If not than Enter 0 and Click on Write Same thing do with Chain 793 Link 44 Your problem will be solved... Or else contact me on whatsapp
very good sir..
Very helpful 👍
thanks
mery pass 5855 hy us ki toner bottle nhe chal rhi or tonor feed nhe ho rha
kindly guide
Try to check the Connections Beside the toner bottle Left side of your. Also remove the Waste, Empty and install back the waste bottle...
than check if this works.
If the fault same.
try to Reset the Machine Software.....
atof bae kyocera 5501i ka develpor unit ka repering ka video chahy dust a os develpor ko cleen karna a
atif bae print ma lakeer ha rahi devolper tank ma dust kachra ahos ko khysy nikaly pees uplod video
Sir Hamaray pas Kyocera Machines available ni hain.... In future agar koi machine aiy to zarur uski videos upload karu ga...
@@alifservices thenk u sir for refly
sir koi utube page kalimk bhajo jo jo kycuria machion ka part k bary ma batahay thnks
@@alifservices koi hoor link o aap k paas ya website o jis ma ranomai lon aap ka bahoot bahoot shokiriya
@MS WRITES, I cannot see your Comments. Please share the number with Country code.
&
the Fault Code 092-910 Always shows where there is a need to clean the ADC sensors.
Please clean Your Machine ADC Sensors. This will help you resolve the problem.
...sir meri machine me xerox 5855 me toner control system fault ka error aa rha hy apki video dekh k set ki phr b ni ho rha 7,8 print nikalny k bad phr machine restart hony lg jati hy aur jb on hoti hy to phr toner control system fault likha aa jta hy...
@@yasirkhan-lz7rv Try this
when Machine is on state
Press *#Stop at once.
Give Code: 6789
Goto Adjustments
DC131 NVM Read/Write
Chain 793 Link 43
And Click READ
Check if the Default Value of TC LockoutLow is 0 If not than Enter 0 and Click on Write
Same thing do with
Chain 793 Link 44
Your problem will be solved... Or else contact me on whatsapp