I need a set of these! Please make more stuff for the RAV4 as there is not much of a market out for them. You guys could take the lead and be the main RAV4 place
Got the blackout set of these. I followed your instructions, and it all worked perfectly, and only took 20-30 minutes total to do both! On my set, the driver's side wires were blue and green, so I tested them before closing things up, which was good, because I had to reverse them. The passenger side wires were red and white, so they weren't an issue.
I've seen some instruction and few videos with people removing the mirror or managing to break stuff so I'm a little worried but this video demonstrated the removal of the cover with such an ease making me feel less concerned. I have the turn signals now I need to find time to get it it. I also want to change "paddle" lights once I'm on it "killing two birds with one stone" 👍 Thanx for this video Bro
I sent an email to your customer service about this item today. I have a 24 rav4. I know these probably haven’t changed. Just making sure I’m safe to order these. Thanks.
Very helpful video! Any chance you have the old lights you took out for sale possibly? A rock came up and hit my passenger side light and cracked it. I would like it to have the factory look as I might sell but can't find anywhere. I will buy from you if you have one available? Its a 2022 RAV 4 xle prem.
Is it really that easy to remove that outside plastic part by hand? Most of them prying it first. Imma try it this way wish me luck. I have a bad feeling of breaking it already😂
Great video but I found taking the bottom molding off also made it easier to place the light. It practically comes off anyways. You just have to push in on the clip located door-side of the wiring tube. I'll be as smooth as you and not need to one day 👍
@@dougadams6861 I also loosened the bottom cover trying to get the light in the groove of the bottom cover the first time. Then I wasted 10-15 minutes trying to get it to reseat without unclipping the bottom cover. I took the piece fully off by using a screwdriver to push in on the clip, located car side of the mirror near wiring tube. Because it fits around the arm of the mirror you have to slide it in a bit. Then I lined it up best I could and pushed in on both sides at the same time. If it isn't lined up flush pop the clip again and try to line it up smoother. That way took 2 minutes. I even popped it off and tried it again to see if it was a fluke. Don't settle for less than flush.
Sorry, I should have looked at the link, I was thinking these were the MeSo Customs. These are sequential lights, verses the MeSo, which are not. Correct?
I need a set of these! Please make more stuff for the RAV4 as there is not much of a market out for them. You guys could take the lead and be the main RAV4 place
Go to AliExpress and eBay. Search 2020 Rav4, lots of interior and exterior products.
Got the blackout set of these. I followed your instructions, and it all worked perfectly, and only took 20-30 minutes total to do both! On my set, the driver's side wires were blue and green, so I tested them before closing things up, which was good, because I had to reverse them. The passenger side wires were red and white, so they weren't an issue.
I've seen some instruction and few videos with people removing the mirror or managing to break stuff so I'm a little worried but this video demonstrated the removal of the cover with such an ease making me feel less concerned. I have the turn signals now I need to find time to get it it. I also want to change "paddle" lights once I'm on it "killing two birds with one stone" 👍 Thanx for this video Bro
You make it look so easy! Thank you! Other installation videos make you do a whole lot more. Your knowledge is well appreciated.
God the plastic pieces break so easily, be extra careful y'all! Got the blackout version. Thank you for the video :)
I sent an email to your customer service about this item today. I have a 24 rav4. I know these probably haven’t changed. Just making sure I’m safe to order these. Thanks.
Sequential turn signals looks so good.
I hope you do a 2020 or 2021 Highlander with Sequential Side View Mirror Turn Signals Install soon, great job on this video!
Really useful. I dropped my drill bit inside the door and it was hard work to get it out.
Best video ever for this.. TY
Thank you! This is helpful, just pry it open with hands... super easy
This video helped a lot! Thanks!
Very helpful video! Any chance you have the old lights you took out for sale possibly? A rock came up and hit my passenger side light and cracked it. I would like it to have the factory look as I might sell but can't find anywhere. I will buy from you if you have one available? Its a 2022 RAV 4 xle prem.
Is it really that easy to remove that outside plastic part by hand? Most of them prying it first. Imma try it this way wish me luck. I have a bad feeling of breaking it already😂
What makes the factory ones amber? Is it an amber bulb, or amber housing? Can the factory one be opened to remove whatever makes it amber?
Great video but I found taking the bottom molding off also made it easier to place the light. It practically comes off anyways. You just have to push in on the clip located door-side of the wiring tube. I'll be as smooth as you and not need to one day 👍
Hey how did you get the bottom cover to clip back on? I accidentally partially removed mine during install and can’t get it to seat nicely.
@@dougadams6861 I also loosened the bottom cover trying to get the light in the groove of the bottom cover the first time. Then I wasted 10-15 minutes trying to get it to reseat without unclipping the bottom cover.
I took the piece fully off by using a screwdriver to push in on the clip, located car side of the mirror near wiring tube. Because it fits around the arm of the mirror you have to slide it in a bit. Then I lined it up best I could and pushed in on both sides at the same time. If it isn't lined up flush pop the clip again and try to line it up smoother. That way took 2 minutes. I even popped it off and tried it again to see if it was a fluke. Don't settle for less than flush.
Can you give me a link or info on with what you used for the fog lights kit? I appreciate any help
these are also compatible with 2020+ Highlander from what i'm seeing
Hi,
Any chance to install led light on the bottom mirror? I couldn’t find on Ali.. bottom part mirror with space for light..
We have one for the Tacoma and this is the same mirror, the harness might be different though
Good morning, I have a question for you. Where can you buy all black turn signals and what is the price?
Link is in the description
I just installed these and now there is a whistling sound coming from my drivers side. Any idea why?
Only when driving? If so, I would make sure everything was clipped in all the way
I wonder if they have them for the 2014 version! If they don’t it would be awesome!
I don't believe there is one
Taco Twonz 😭😭😭😭 would be so cool though!!
Taco Twonz love what you guys do! Keep it up! We’ve bought stuff for our trd pro 2020 Tacoma
Does this turn of the Blind spot sensors?
No, it doesn't affect or
great video whare i can get those lights
Link is in the description
Will these work on a 2021 Toyota Highlander?.
Yes it will
Any idea when these turn signals will be back in stock?
They are in stock
Sorry, I should have looked at the link, I was thinking these were the MeSo Customs. These are sequential lights, verses the MeSo, which are not. Correct?
Does anyone know if you could upgrade the RAV4 2021 LE regular mirrors to these without running cables?
You cannot without having to run power to it
did you open to see if the contact exists?
i have those but yours look like its tinted darker than mine
More RavOverland vids plz
We will try
Damn, broke the plastic housing on bottom side
I did the same thing. Did you find somewhere to buy it to replace?
@@angelaory7728 what about you?
$100 for these seems like highway robbery tbh
$20 to $30 on AliExpress.
But it's still amber. Gross.