I quite like the white bumpers also. Some white porsche decals down the side to set it off. I think it lends itself really well. Amazing work, as usual. I'm sure you'll sort the blemishes.
Some great techniques on the tube on how to eliminate (excessive paint flow areas) sounds better 😅 thats going to come up like glass Andy. Great finish gun fresh.
Looks fantastic 👏. I'm agreeing to the white lower half too . A little run removal tip I learned later on in my painting career is to use a razor blade (single sided so you can hold it) , tiny bit of masking tape at each end of the blade so you're only using 50% of the middle then drag it across the top of the run at roughly 90 degrees back and forth until most of it's gone. This stops the sandpaper rubbing the paint off around the run . Long winded from me but hopefully it'll help . Love the car and constantly searching for a covin body shell like I mentioned previously ,cheers
I was hoping you’d have some run fixing tips! Thanks buddy 🤩 I recommend joining the Covin 250 Facebook page lots of us on there, Covins come and go on there too 👌
Looking good. I've been following a long for a while now and it's coming on a treat.👍🏻I thought about one of those spray gun lights, was it any good? And you may have mentioned your spray hood in one of your other vids, I can't recall, does it use a lot of air?
The gun light was excellent! It would have been even better if I could have evacuated the overspray mist faster but can’t do a lot about that unless I was to buy a bigger fan. The hood and gun used nearly all my compressor output which is 36 CFM. It was on almost constantly.
Yes I have the same problem with over spray mist and my eyes are getting older , hence the need for the light 🤣. Also the over spray sticks to the mask I have at the moment making it a double whammy. I think the hood would be too much for my compressor, but thanks for the info. 👍🏻
I personally think all blue, but ultimately your decision lol.. 👍
Yeah I’m with you there Tim, I’m going all blue after all. 🤩👍
I like how it is going
👍
Thanks Alex, me too! 🤩
Niiiiiiice job.....🤓👍👍
Thanks bud 😊
Great job 👍🏽 Wish I was closer to Britain. I'd come and help you. Just for the fun of it. Rob, Cairns, Australia 🦘
Nice comment, thanks Rob. 😄🙌
💪👍👍👍
I saw a playlist of this about a month ago and seeing updates of it ever since. It's nice to see it getting a fresh coat of pain after a long while.
Yeah it’s made a huge difference! 🙌
Bumper looks great in white, I'd definitely be leaving it like that 😊
Nice work Andy. Now almost the last stretch with paint jobs. I really wanna see final result once all painted and panels etc fitted. Keep it up buddy
Yeah on the home stretch now! Thanks buddy 🤩🙌
I love the blue and if it was me, I would paint the lower white bits blue as well - great work 👍
Ta bud! That’s 1 blue v 4 white so far. 😁
I really like the white bumpers. Before you mentioned, I was already thinking it was super cool contrast!
Yeah I was thinking that too. 🤔 🤩
Well done mate. I am still interested in the inner structure idea.
I quite like the white bumpers also. Some white porsche decals down the side to set it off.
I think it lends itself really well.
Amazing work, as usual. I'm sure you'll sort the blemishes.
It’s a tough call this one! Really can’t decide! 😆
Looking great! I also like the white bumpers, maybe with some white door number circles or other graphics
Yeah deffo agree with that 👌👌👌
i really was hoping you where doing to top blue and the bottom white. it really sets off the colors so well imo.
Gulf Blue? I really like it…looks great! 😀👍👍 I do like the white bumpers. And would look even more ‘race car’ running sans rockers.
It’s not quite gulf blue - nearly but not quite 😄
Some great techniques on the tube on how to eliminate (excessive paint flow areas) sounds better 😅 thats going to come up like glass Andy. Great finish gun fresh.
Hi Gordy, yeah been watching some stuff already 😆
Amazing
Thanks ☺️
razor blade the paint runs first great work btw.
Cool, thanks 🙏
Peal white nice color blue
Well done. I'm sure you will get the minor imperfections sorted. I quite like the white. It's something different
Cheers Chris, yeah I kinda’ do too!
Looks fantastic 👏. I'm agreeing to the white lower half too . A little run removal tip I learned later on in my painting career is to use a razor blade (single sided so you can hold it) , tiny bit of masking tape at each end of the blade so you're only using 50% of the middle then drag it across the top of the run at roughly 90 degrees back and forth until most of it's gone. This stops the sandpaper rubbing the paint off around the run . Long winded from me but hopefully it'll help . Love the car and constantly searching for a covin body shell like I mentioned previously ,cheers
I was hoping you’d have some run fixing tips! Thanks buddy 🤩 I recommend joining the Covin 250 Facebook page lots of us on there, Covins come and go on there too 👌
@@air_cooled_andy 😅 I am a bit predictable yes but hopefully it helps mate . Thanks for the group recommendation I'll go and join , good luck 👍
I like predictable mate! See you on the FB page!
@@air_cooled_andy yes mate 100% if you've got insta I'll gladly communicate about products etc , just so bored working on minibuses 😅
Looks Great Andy! 🙌 Was the Paint Gun Flashlight any good?
Yeah great Finn! Worked well!
Looking good. I've been following a long for a while now and it's coming on a treat.👍🏻I thought about one of those spray gun lights, was it any good? And you may have mentioned your spray hood in one of your other vids, I can't recall, does it use a lot of air?
The gun light was excellent! It would have been even better if I could have evacuated the overspray mist faster but can’t do a lot about that unless I was to buy a bigger fan. The hood and gun used nearly all my compressor output which is 36 CFM. It was on almost constantly.
Yes I have the same problem with over spray mist and my eyes are getting older , hence the need for the light 🤣. Also the over spray sticks to the mask I have at the moment making it a double whammy. I think the hood would be too much for my compressor, but thanks for the info. 👍🏻
Old age eyes, I know the feeling!! The hood has removable plastic sheets on the front, I went through 3 doing this job.
Почему бы не оклеить авто виниловой пленкой? К тому же, это позволит нанести гоночную ливрею на кузов.
👍
Вчера вечером я думал о том же 😄 Хорошая идея, но здесь, в Великобритании, получить полный пакет услуг стоит дорого.