How to pipe up a radiator valve
HTML-код
- Опубликовано: 26 янв 2024
- Plumbing asmr video
In this video I am piping up a radiator valve. We first fixed the radiator tails first in behind the wall in a very old cottage with lime render walls.
The radiator was hung and valve tails made in. In the video I’m showing how to cut your tails and install the radiator valve.
I had the laser out while hanging all 3 radiators in the same room so I moved it in front of the radiator valve so I could get it level.
Simply fit the valve loose and measure for center of pipe. Hover up a fitting to the center to get your distance for pipe and fitting.
Put the fitting with pipe with valve onto the tail and solder up. Make sure the valves in the open position with no head on and with small heat it won’t damage the internals as all the heat enters the radiator.
Please enjoy, like and subscribe will very help the channel. Many thanks for you watching my videos and I appreciate every one of you.
Never used a laser in all my many many years as a heating engineer. Never had any problems lining stuff up.
Well done 👏
it's ok to go above and beyond
Laser is a bit overkill in this job. It's that feeling when you get a new tool that's exciting and you just can't wait to use it so you end up using it where you didn't really need it. Seriously, guy was just throwing on a 90. Did not need lasers for that, but they're his new $300 lasers!!
Best way to damage the valve
The plaster around pipe is nice 😂
Haha not guilty 🤣
haha first thing I noticed too!!
The laser is a bit much i agree i would be more concerned about soldering the elbow with the valve in place would the heat not do damage to the valve.
My thought exactly.
As long as it is opened it'll sweat fine... it's not as hot as brazing
If you need a laser level to pipe and fit a rad valve, you've no business trying to teach others.
I am concerned about the positioning of the thermostat since it shouldnt be positioned that way.
Also the heat will damage the valve, id have rather used ProPress.
Erst wird gelötet. Sonst kann man das Ventil erneuern, da das innen Teil zu heiss wurde.
The owner has been nominated to polish this steampunk pipes every year 🎉 😅
Great job well done
If you're running copper pipe through lime, whether it's plaster, render, or mortar, you must use sleeving such as PVC pipe, as the lime is so alkaline it will corrode the copper causing premature failure.
It’s taped up so it’s not in contact
@@mmplumber tape isn't sufficient, unless it's something specifically for this use, which I am not aware of. The alkalinity plus moisture will break down the tape.
I'm lovvvviiiinnngg it!
A lot of heat going into that valve
Thanks
No worries buddy
Heat the paint to remove it. Smart
The drill attachment is very nifty . Have you got a link
The guy on plumber parts has a link on his video i think its Amazon
After all that nice work, why no wall flange or some finishing touch between the wall and the 1/2" copper pipe?
No escutcheons on the truck
@@JoeA1974 Find one a week later. Still in plastic wrap.
Aww isn't that cute... he got to play with his laser..😂
Dude where's your damn flux brush? Using your finger to apply flux!.!.!. Are you kidding me? 😂
Another great video mate. What flexi blow torch you got mate. I had a flexi one before worked a treat but didn’t last very long
Mine latest me a year, this is the javac flexi, it has its querks like fluctuating but I live with it as its pros out way the cons
Using a laser? lol 😂
Даже палец вверх по лазерному уровню поставил
Love using a laser
StyroPyro here on RUclips has the laser fix you've all been Jones-ing for 😂 better use of a laser guaranteed 😉 👍
Wow I really enjoyed your video!! You are a real craftsman who actually knows how trade and cares about his work!! Thank you sir and keep it up
Have you ever seen plumbing installed that wasn't on some video? 😆
How is the paint on the old pipe not just burning after dumping that much propane heat into the pipe? It didn’t even smoke a bit…
А я первый раз вижу медные трубочки
Термоголовка не правильно установлена.
Where do you get that nozzle plz
Just google javac flexi torch
А запорную арматуру снять перед пайкой???? Горе монтажник😂
Hi, what country are you from? What did you study to become a plumber? How can I contact you? Thank you.
An International Plumbing code book is a good place to start
Pourquoi avoir mis la vanne thermostatique sur le retour??
Pourquoi souder sans avoir enlever le robinet thermostatique??
How do you know it’s the return? How else would you join the pipes
Les radiateurs s'alimentent par le haut et les retours sont en bas.
Et ceci est pour une bonne convection du radiateur, l'air qui passe entre le radiateur monte naturellement.
Les robinets thermostatiques se montent sur le départ.
j'aimerais bien savoir ou il a eu l'ébavureur pour cuivre qui se monte sur une visseuse?
@@foster6902
Oui, et son coupe tube aussi.
On ne soude pas à l étain un chauffage central
Here's a guy not on price work 😂😂😂
Nope day rate my friend
Its not even straight after all that lol
Мдэ... Технологии предков...
Нет ничего лучше полипропилена.
Hahaha that stuff is nasty!
Неправильно смонтирован термостатический клапан-видно сто за "специалимт"
То ,что он снизу ,а не сверху ?
Bit over the top using a laser isn't it ? If you can't do a simple job like that you might be better of working for Mac Donalds. Iv'e worked on new builds where you have to have all your rads hung and piped up by dinnertime to earn a days pay.
I'm lovvvviiiinnngg it!
Those new builds with plastic push fit right?
@MJ-ce6tv I just did a remodel at an old university dorm converting to low income housing that had 4" welded schedule 40 steel heating supply and return as well as a pair of 4" steel lines for the chiller, supply and returns... welded up to weld o lets for the 1½" and smaller runs to each fan coil... Brass flowsets and some with zone valves on all 4 heat and chill lines....
And I never took my laser inside.. got the nice Milwaukee m18 laser but I'm not shooting videos to impress anyone on RUclips. ..
Not that it is a bad idea... People love lasers.. check StyroPyro here on RUclips if you're a fan of lasers too. You won't be disappointed
Terrible soldering technique