Tita Mod and RBA by Veepon
HTML-код
- Опубликовано: 30 май 2022
- PLEASE, remember these are just my opinions, I am just some bloke in a shed with a webcam after all, so I would strongly advise that you research everything before you buy, never go off just my opinion, read and view as many reviews as you can. The majority of my reviews are for products I have received free for review, this in no way affects my opinion.
Unless otherwise stated, any premade coils used in my videos have been supplied by PC Coils
Ensure that you check your resistances and batteries before firing any device, vaping safety must always be your first priority.
For 2022, all charity donations shall be going to;
Macmillan Cancer Support - www.justgiving.com/fundraisin...
Dogs Trust - www.justgiving.com/fundraisin...
Mind (Mental Health) - www.justgiving.com/fundraisin...
Links:
Music by - / dyallas
Facebook - / toddsreviews
Facebook Group - / toddsreviews
Website - www.toddsreviews.com/
Pinterest - www.pinterest.co.uk/toddsrevi...
Twitter - / toddsreviews
Email - todd@toddsreviews.com
Equipment I use:
Grecian 2000 light brown
VO5 Hair Gel
Panasonic HC-V720
A Shed
Working Cocker Spaniel (painting by www.btbartist.co.uk/)
A very patient wife.
Jeez, I was in process right now of buying the DNA POM version for $200 - but something just did not sit right with me regarding this company (long story including FB & Whatsapp chats). Lucky I saw your review before pressing the GO button. Thanks Todd - the last of the true, honest & unbiased reviewers. No wonder you are so popular here in South Africa
Honesty is the best policy ! Nice fair review with good information Mr. T.
Thanks for the review! Got mine a month ago. Love the mod, hate rba - there is a critical issue with the pin isolator (i had to put it backwards to use it with the adaptor!) and all those resistance flunctuations drive me mad. I've tried two other rba - no such problems at all.
Great review fella 👏👏
Honest as always 👍
Great review Mark, Thank you🍻
They do have good customer service...I had the white one, after about 3 months it gave up the ghost...they sent me a new one pretty quickly. Agree with your point on the rba, other dot type tanks dont jump about as much. Nice review Mark, I agree...feels great in the hand .
Yes someone watched it mate…. 😁 Thanks for the honest opinion as always…. Nice after market panels…. I must have been very lucky with mine. Absolutely no door/ panel movement with mine. I have been using the BP Mods Dot RBA that I got to run with this and have only a little fluctuation with resistance. Once again luck of the draw. I’m sill waiting for my Silos to ship. That will complete my Dot AIO purchasing tick. 🙏🤙🙏
Thanks again mate.
Was looking for an honest review on the tita x. I remembered someone told me mark Todd is the man so here I am 😉
Great review and I agree with you about the rba..all my issues are with that. The mod is great itself as i have all three of them. I use the pioneer dotrba and they are solid as a rock. I don't know why since the 3mm pin is screw in that they didn't just make all pins the same way. But it is what it is...
Thank's.
I’ve had my Tita a few months an have had the same problem with jumping ohms using the dot spot rba. I decided to buy the Pioneer dotrba after watching some reviews. I’m happy to say no more jumping ohms since I started using the pioneer dotrba in the Tita, just a small observation but the pioneer seems to fit the Tita better, also the flavour from the pioneer dotrba Using the 2.5mm airflow is really nice, much better than what I was getting from the dot spot. I’m enjoy my Tita aio so much more now I’m getting a better vaping experience ☺️💨
Excellent review, and very fair. I have no interest in a device that won't play well with others, can't hold a resistance, can't produce two units the same, can't produce doors without play and are manfutactered with little of no qulaity control - nice button placement though
Almost a month using the tita aio..i dont have a big issue with the device..use for a daily vaping..performance very good and more satisfy with the flavouring
Good to hear, glad you enjoyed the review.
Nice reviews. I'm using 3.0 afc pin no problem also my battery cap magnet. I will try the others afc pin.
Cool, thanks
Love my white Tita with a white front panel although I must say I don't mind the black carbon fiber. Gonna have to get the red though!
I can't vouch an opinion on the red Tita as I don't have one, I can only give my feedback on the black and white versions. The only time I ever had any problems with resistance fluctuation was when I noticed that the airpin had some eliquid on it, after I took it out and cleaned it, the resistance didn't fluctuate. Accuracy of the resistance compared with another mod or tab was only out by 0.01-0.02 ohms using with the Tita rba or the Pioneer, which was acceptable. I have not had any issues at all with either door movement or the threads on the battery cap. I think you've been unfortunate with yours for this to happen, the luck of the draw.
one is unfortunate George, two is unlucky, three and four is most definitely highlighting an issue.
It’s the Tita. It’s awesome. Been using it for 2 months with every dottank i have, rba’s & stockcoils. Not a single issue. Not with resistance, not with doors, not with batterycaps.
Not just my opinion but facts.
Chuffed for you.
@@ToddsReviews thank you. Me too. 😁
I'm genuinely liking the tita, except for the fact that my firing button lost its clickyness after a few weeks and is now just mushy. And the company I bought it from is like oh well that's not our problem and has said I'm stuck with it. But it still fires so hey ho. it's a good dotaio compatible device. But I do definitely find the resistance jumps a fair bit with my dotmission. I've got in the habit of taping the fire button to reset the resistance then taking my puff.
As always, credit to Mr Todd for an objective and fair review. Excellent stuff, you really shouldn’t feel bad, because the alternative approach to reviews is much much worse!
I agree with you, it’s a really nice looking device, but that resistance jumping and the jarg DNA 60 are deal breakers for me.
My resistance fluctuates on the tab build deck. I think the reason for the fluctuating has to do with how that center piece (not the pin) is screwed in.
I removed it and tried the 3mm pin which doesn’t use that center piece, and it fixed it.
So I tried playing with that center piece, and it worked better (less fluctuating).
If I was just basing it off that tab you may have a point but I'm using my benchmark coils, also testing on other mods and using different RBAs. If you or anyone else is getting in great with the mod or RBA, well I'm happy for them but it doesn't change my findings based on the 4 mods they sent me.
Grumpy Todd 😋👍
@@ToddsReviews I’m using it in the DotAio. I’ll go with your opinion, and guess that Tita mod and rba might get a bit better with the next version.
Not bad, but needing some tolerance adjustment.
All in all, great product review as usual from you Todd.
nice review as always Todd, but i see you kinda hesitate when talking about the cons, you must be the kindest vape reviewer out there Lol, dont worry Todd, if its good, its good, if its not good, its not good, you are represent us - the users, not them. They will have to improve their product
I love how he does that. When he sucks air in between his teeth with the little shrug - you just know it's shite but he's too much of a gentleman to say so
tenía el mismo problema hasta que se me ocurrió la solución y funcionó, (I had the same promblem but I thinked the solution and I solved) 😇
I’d worry I might swallow the drip tip 😂
We are sorry for letting you feel not good but many reviewers and our customers used it , no this problem and we will keep improving for our good possibility of the goods .
As you said , it is just your opinion and we hope customers can really try this one , thanks!
You are absolutely correct, just my opinion, apart from the tolerances, battery cap falling apart, the board and the resistance jumping all over the place. They were facts 😉
So you just slap it to adjust the resistance, that's some innovation 🤣. I'll stick with the dotaio. Thanks.
I was using this device...dont have any issues with that
Chuffed for you.
Hi! could you please tell us wich is the 510 drip tip, combining metal and other material, used on your dotaio? really like it 😜😅
Look for "drip tips handmade by Bill" on FB
What you said doesn't make sense because I myself have used the Tita Aio device .. there has never been a problem even a little .. it is very good to use ..For me the magnet fitted on the battery cover part is indeed appropriate to prevent the handle on the battery cover from opening by itself.
So because you never had an issue, I can't have one either?
I don’t see why someone would get this instead of a Dotaio v2. The v2 has a better design (to me it TITA looks hideous but it is subjective), is more portable, has a better chip, better compatibility with tanks and quality is way better!
Here I can conclude, if we use other rba like dotmobb and silo, there will be no issues because it was tight fit and enough pressure between spring load and the rba right? Sorry my english is not very good. Im trying to understand your review 😅
Yes, kinda sums it up 👍
So come on Todd tell us what's the new season of Stranger things like ?
Slow for the first 2, 3 episodes but once it got going, loved it :D