Firestone Ride Rite Rear Air Spring Install 2015-2019 F150 / jhacors vlogs

Поделиться
HTML-код
  • Опубликовано: 22 дек 2024

Комментарии • 49

  • @tysonchartrand7252
    @tysonchartrand7252 Год назад +4

    Did my bags this morning! Followed your video step by step, very well done! Much appreciated, saved me a lot of money

    • @jhacors
      @jhacors  Год назад +1

      I’m glad I was able to help😊

  • @stephengibson2869
    @stephengibson2869 Год назад +3

    I like how you explained each step of the installation process. And you did everything in a simple way.
    I'm looking to buy the kit that has the compressor and the air tank, so that it will be easier for me to do the airing up and deflating of the airbags.
    You did a great job of showing us the installation of the air bags on your truck. Thank you 👍.

  • @cartersservices3134
    @cartersservices3134 2 года назад +1

    I was quoted 1700 and 1500 by 2 different shops with on board air. I’m going to order the kit and do it my self. Thanks for the video

  • @alberthornsby8486
    @alberthornsby8486 2 года назад +3

    Great video. I ran my air lines separate to make sure each one had exactly the same air. And used the license plate screw holes it’s easier to get to.

  • @DS5901
    @DS5901 2 года назад +2

    Man, thank you so much for this video. Thanks to this video I was able to do it myself in my garage. Very simple task after watching the video. Appreciate it

  • @davidirwin3672
    @davidirwin3672 2 года назад +1

    Great video, I now feel confident that I can install this on my own with no problems. Thanks

  • @davewilson8308
    @davewilson8308 2 года назад +2

    You made it look easy, getting this for my 2022 F150 if it ever comes in. Thanks!

    • @jhacors
      @jhacors  2 года назад +1

      This was an easy intall anyone can do it. Thanks for watching

  • @TVCJohn
    @TVCJohn 2 года назад +2

    Good vid!! Very easy job for the most part. One thing I might suggest to folks is use WD-40 to spray the threads of the bolts that hold the two small bumpers mounted on the bottom of the frame. I used an air wrench to remove them and one of the retaining nuts broke off from it's mount inside the frame channel. Luckily, there is an access hole on the inside of the frame to get to the retention nut for each small bumper. I have a Sthil chainsaw and the chain/bar wrench (socket) fits inside there real well to hold the nut. I was able to get the bolt, nut and bumper off that way. You may be better to spray the threads and remove the bumper bolts by hand vs an air wrench. Bottom line....if the threads of those two bolts are dirty/rusted and you break off the retention nut(s)....it can be a pain to remove the bolt and bumper.

  • @Fishin_Alberta
    @Fishin_Alberta 3 года назад +2

    Really good video! I will be watching again when I install my set thanks

    • @jhacors
      @jhacors  3 года назад

      No worries, I hope you find it useful

  • @TheNeidrick
    @TheNeidrick 2 года назад +1

    Great video, did mine this morning.

  • @19baitmaster51
    @19baitmaster51 Год назад +1

    Screwing air fitting into bag is easier if you do it before bolting bag to bracket. It swivels, so you can line it up to get it thru slot.

  • @leslattery3913
    @leslattery3913 2 года назад +1

    Very good video of this install. Thanks

  • @Whiskerdoo
    @Whiskerdoo 6 месяцев назад +1

    thanks man!! perfect how to video

    • @jhacors
      @jhacors  6 месяцев назад

      Glad I was able to help👍

  • @trosspierson8023
    @trosspierson8023 2 года назад +1

    Great video!!!

  • @cretefarm4389
    @cretefarm4389 Месяц назад +1

    Do you have the part # for the brass three way fitting. Making one air intake port.

    • @jhacors
      @jhacors  Месяц назад

      @@cretefarm4389 a.co/d/h4vIYGS

  • @darrylm3627
    @darrylm3627 3 года назад +1

    Good Stuff, Great Tips👍🏿😀

  • @n.elliott9122
    @n.elliott9122 Год назад +1

    I enjoyed your video. Just so happens I am close to buying Firestone 2286 kit. Are you still happy with your purchase?

    • @jhacors
      @jhacors  Год назад

      Yes, still very happy, smooth ride even when pulling my trailer

  • @danzhyferolino2260
    @danzhyferolino2260 Год назад +1

    Where did u install the low pressure sensor?

    • @jhacors
      @jhacors  Год назад

      Low pressure sensor did not come with the kit

    • @danzhyferolino2260
      @danzhyferolino2260 Год назад

      So how are you able to put some air? Did u install a compressor with that?

  • @VadimZakharchenko-h6x
    @VadimZakharchenko-h6x Год назад +1

    My 2019 f150 has a 6” lift on it, some people are saying I need to add a spacer to cover the distance for the air bag, do you know anything about that, I didn’t see you add any

    • @jhacors
      @jhacors  Год назад

      I did not add any since the spacer or the block for the lift is under the leaf springs, so your good to go

    • @VadimZakharchenko-h6x
      @VadimZakharchenko-h6x Год назад +1

      Awesome, thank you! Saved me some money😂

  • @rayrayfro4940
    @rayrayfro4940 Год назад +1

    I only pay $215 for mine is the same one you have putting into a 250 truck but thanks for the info I appreciate it it’s been a while since I’ve done one

  • @robertament4006
    @robertament4006 3 года назад +1

    Good Video.

  • @hunterpignato4255
    @hunterpignato4255 2 года назад +2

    I don’t understand why the spacer is for 2wd?? Nobody can answer this question

    • @alexiscatano9046
      @alexiscatano9046 9 месяцев назад

      I was sure the spacer was for lifted trucks or leveled out trucks

    • @jhacors
      @jhacors  9 месяцев назад

      Mine was lifted but I did not use the spacer

  • @wyattburns6436
    @wyattburns6436 3 года назад +1

    What size leveling block is on your rear end springs? Looks pretty big..have you already leveled your truck?

    • @jhacors
      @jhacors  3 года назад +1

      That is for the 6 inch lift

  • @pooleo8
    @pooleo8 2 года назад +2

    The firestone kit is such a great product. The air lift brand is absolute garbage. It mounts inboard of springs with a real flimsy bracket, uses huge u bolts to hold it to the frame. I sent it right back and got the firestone. It's great!

  • @williamgowan9026
    @williamgowan9026 2 года назад +1

    What size rear block do you have?

    • @jhacors
      @jhacors  2 года назад

      That’s for my 6 inch BDS lift

  • @timrichards7015
    @timrichards7015 Год назад +1

    You may not see this. But I was wondering the ride quality while empty or 5psi as suggested. Is it the same as it was or bouncy

    • @jhacors
      @jhacors  Год назад

      It’s a little bit bouncy but you wont affect the ride quality, you’ll get used to it along the way

  • @thebrodnaxs8304
    @thebrodnaxs8304 3 года назад +1

    Do you have the link for the "T"?

    • @jhacors
      @jhacors  3 года назад +2

      Air Lift 21838 Union Tee www.amazon.ca/dp/B001F532PY?ref=ppx_pop_mob_ap_share

    • @thebrodnaxs8304
      @thebrodnaxs8304 3 года назад

      @@jhacors thanks so much. Great video btw.

    • @jhacors
      @jhacors  3 года назад +1

      Thank you so much! 👌

  • @franky7830
    @franky7830 2 года назад +1

    👌👌

  • @5thGenNativeTexan
    @5thGenNativeTexan Год назад +1

    Great install info. I used this when I put Firestone air bags on my 2016 F-150. I opted to install an Air Lift Wireless compressor, just for the convenience. It can be controlled either from the Air Lift remote, or through the Air Lift app on my phone. ruclips.net/video/AfduMwQvwh4/видео.html

  • @jacarandadirectors
    @jacarandadirectors 11 месяцев назад +1