How To: Whirlpool/KitchenAid/Maytag Exhaust Kit W10470674

How To Replace: Whirlpool/KitchenAid/Maytag Exhaust Kit W10470674 www.appliancepa...
Symptoms: You want to vent your dryer through the bottom of the dryer or out either side.
Tools: 1/4” nut driver, flathead screwdriver, tape, Phillips screwdriver, chisel or small drill, 5/16” nut driver.
This Whirlpool/KitchenAid/Maytag made Dryer Exhaust Kit replaces the following older part numbers on Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, Sears, and Kenmore Dryers: 2237009, 279818, 279819, 279820, 279915, 279925, 279969, 280028, 280102, 280103, 280104, 280171, 280171A, 280189, 280189A, 3388309, 38020, 40012, 697750, W10152954, W10152955, W10186596.
Buy the new Dryer Exhaust Kit W10470674 here: www.appliancepa...
Most orders delivered in 2 business days or less.
If you enjoyed this video, please click the like button. Subscribe to this channel for more appliance repair tutorials.
If you need any more technical advice, call us at 1-877-477-7278 or chat with us on our website www.appliancepa.... We're available 7 days a week.
For more appliance advice, information, and tips, follow us on social media.
Facebook: / appliancepartspros
Twitter: / applpartspros

[@rconger24]

This kit won't work if your dryer has two "holes" (knock-out-panels) on the left and two on the right, and you want to choose one of the front holes. The left front hole has the drive-motor in the way. And the right front hole requires a tighter radius elbow than the kit provides.
The kit works just fine if you want to choose one of the side rear holes or the bottom rear hole.
Cue video to 9:00 to see what a knock-out panel is.
Some dryers offer only three knockout panels. Others offer five. If yours offers 5 then the front side ones are not really available for a solution with this kit.

[@msilverhammer]

Wow!
Great job, but unbelievably complicated, and labor intensive!
What about the installation of the Samsung DV-2A/XAA Side Vent Kit, used on the Samsung - 7.2 Cu Ft White 27" Front Load Electric Dryer, Model: DV400EWHDWR?

[@703llh1]

Holy crap..I just wanted to attach to duct to the back of the dryer. Who the heck wants to rebuild a friggin dryer!?

[@jrwithrow]

My dryer vent leaves the house on a south wall, the back of my dryer faces north, is it ok to vent 180 degrees +? Also when it gets to the end of the vent (south wall) the vent goes up hill approx 6"... I'm trying to figure out why my dryer is not venting properly with the exhaust hooked up. To be clear my approx dimensions and path are; 12" north -then- 12" down (lower) -then- 12 ft south -then- 6" up (higher) when it leaves the house.

[@appliancepartspros]

+Jason Withrow I would suggest looking over the installation instructions. They will include venting instructions and venting charts to give you overall vent lengths. In general every turn is a huge restriction they recommend trying to keep the turns to 45 deg. 90's can be used but for every 90 deg. turn your dryer run is reduced approx. 10 feet. A 180 deg turn would cause a huge restriction and is not recommended.

[@domcizek]

TO COMPLICATED,