Great job with the table. Mate, you should sell that cad drawing of the table. If you price it right, you could help a lot of enthusiasts like yourself and make some money as well. Win win I say.
Get the mil scale of with a stone or scotch brite pad on a grinder then keep a canola oil spray can on hand and give it a spray from time to time. Better earthing and anti spatter properties plus non toxic when it gets hot
You can use Anti spatter, nozzel dip, spray cooking oil or paint it with coldgal All these things work to stop spatter and you should still have an earth
Loving the build, explanations, detail and I was thinking of doing the same as a welding table, are you able to share the file? Looks wicked. I have the same dilemma, as my first welding Tig project I made a table out of 75x25 900x600 with 30mm gap between and that was before I understood distortion so I now need aflat table. Love the work you are putting into the series mate keep up the awesome work 👍🏻👍🏻
Any chance you could give some indications on price of the laser cutting, just a few experience based prices. Seems like such a great option vs other techniques.
Awesome videos mate. Would it be possible to make the CAD drawings available for download so i can get some steel cut and make my own like yourself. would be greatly appreciated and save me a lot of time drawing it up. if not still love your work and will continue to watch :).
Hi frome Mexico, my name is Ezekiel or Ez, I well love to you help me if you can send me how to do the well table.. for u can build it ne the same .I love you table...
I have a 1400x900 20mm thick steel plate i use as a welding table, been thinking about getting it cut in the same grid pattern, does anyone know a ball park figure for getting it cut in Australia? Never got anything lasered or water jetted before
Hey Gabe, honestly have no idea, it’s hard to say because I’ve been paying for material and they don’t break it down between the two. 20mm is pretty damn thick! Give a laser cutter a buzz and get a quote :)!
Depends if I just supply the laser cutting or the wheels as & legs as well. Depends what you're after. I think around $900 for the laser cutting + post/pickup.
Definitely would be willing to send out as a flat pack, reluctant to give out my drawings and dxfs. If you have a laser cutter I might be able to send it on through!
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
Great job with the table. Mate, you should sell that cad drawing of the table. If you price it right, you could help a lot of enthusiasts like yourself and make some money as well. Win win I say.
Table looks great
Ooo 😯 good music
Great work mate, Spray the top with R1 from Chemtools, it will protect the table from rusting and is non-flamable unlike other products.
Cheers mate, fantastic suggestion I’ll have to get some!
Really enjoyed seeing you build this, great explanations on how you designed it. Excellent work!
Cheers Warren!
Nice work Richard. The table has turned out fantastic.
Thanks Geoff!
Nice job Richard well done mate. Seeya Rob
Thanks Rob!
Get the mil scale of with a stone or scotch brite pad on a grinder then keep a canola oil spray can on hand and give it a spray from time to time. Better earthing and anti spatter properties plus non toxic when it gets hot
Cheers Nick, good suggestion.
scotch brite pad on 5 inch and spray with anti spatter
Thanks mate!
Nice work, well thought out
Thanks mate!
Awesome job mate 👍🏼👍🏼👍🏼👍🏼, really liked it
Thanks mate!
You can use Anti spatter, nozzel dip, spray cooking oil or paint it with coldgal All these things work to stop spatter and you should still have an earth
Cheers, great suggestions!
Loving the build, explanations, detail and I was thinking of doing the same as a welding table, are you able to share the file? Looks wicked. I have the same dilemma, as my first welding Tig project I made a table out of 75x25 900x600 with 30mm gap between and that was before I understood distortion so I now need aflat table. Love the work you are putting into the series mate keep up the awesome work 👍🏻👍🏻
Hi Matthew, DM me on instagram and maybe we can work something out.
How much did the laser cutting cost?
Good Stuff mate!
Thanks Jordan!
Loved this episode of shed built 😂 car wax works well to keep my non engineering degree welding table rust free 😝
Haha, wax sounds like it could be the go!
Beauty
Cheers will!
Hi mate would I be able to buy the plans for the table? Like for laser cutting etc? Cheers
Hey mate, message me on Instagram or Facebook and we’ll discuss!
i normally lather on some excess oil from 2nd hand rangehoods i buy to keep the rust off my table.
😂😂😂 I reckon I might know a guy with a market place range hood he got for a bargain!?
Just use paste wax on the surface of the table. Just a clean and buff and it comes up great.
Okay cheers mate, could be the go!
Any chance you could give some indications on price of the laser cutting, just a few experience based prices. Seems like such a great option vs other techniques.
Hey Mitch, I could sell you the Laser cutting for around $900.
Awesome videos mate. Would it be possible to make the CAD drawings available for download so i can get some steel cut and make my own like yourself. would be greatly appreciated and save me a lot of time drawing it up. if not still love your work and will continue to watch :).
Message me on Instagram and maybe we can work something out!
Nice build, would you share the cad file ?
maybe stone it then anti splater spray
Cheers Brett, going to have to get some anti splatter for sure.
Hi frome Mexico, my name is Ezekiel or Ez, I well love to you help me if you can send me how to do the well table.. for u can build it ne the same .I love you table...
I have a 1400x900 20mm thick steel plate i use as a welding table, been thinking about getting it cut in the same grid pattern, does anyone know a ball park figure for getting it cut in Australia? Never got anything lasered or water jetted before
Hey Gabe, honestly have no idea, it’s hard to say because I’ve been paying for material and they don’t break it down between the two. 20mm is pretty damn thick! Give a laser cutter a buzz and get a quote :)!
What’s a flat pack worth?
Depends if I just supply the laser cutting or the wheels as & legs as well. Depends what you're after. I think around $900 for the laser cutting + post/pickup.
Whats the chances of sending me a pdf file of the cad so i can build one for my self. Or send me one as a flat pack ???
Was going to ask the same question
Definitely would be willing to send out as a flat pack, reluctant to give out my drawings and dxfs. If you have a laser cutter I might be able to send it on through!
@@DesignedandBuilt im happy with a flat pack give me a price when you work out what you want.
I would be interested in a flat pack once you figure out pricing
Awesome work @Richard. Design looks perfect. I 'm likely interested in a flat-pack too.
Would you sell me a copy of your cad drawings for the table?
Dm me mate!
Why did you overcomplicate a table this much 😂😂
haha wait till you you use one mate, best thing going!