I had this exact issue and was quoted £130 and a 4 week waiting time by a local vacuum repair shop. I bought the part for a few quid on eBay, and following this guide, was able to complete the replacement myself in about an hour! Thank you for this video! For anyone else trying this I would highly recommend having good tools for it, such as the long screwdrivers with decent handles on them in the video, I had to muddle through with some cheap tools which made it much harder (but still doable!).
You`re welcome. I`m glad it helped. For sure you will need good tools, especially for the torx screws (T8). I also uploaded a new video (3 ways to fix the broken trigger issue). Is more detailed and gives you more options to solve this issue.
Thank you so much! I had the same issue with my V10, so I 3D printed a new trigger part and followed your video. The Dyson works great and more importantly the wife is happy!
Great video, thanks a million, you’re 100% right they don’t make it easy to take them apart ! But you definitely do ! Dyson much like other manufacturers seem to put hi usage parts in their appliances, made of plastic, probably hoping when it breaks you’ll go buy a new one ! Thanks again 😄
Muchas gracias. En Dyson me dijeron que tenia que cambiar toda la pieza y me dieron un presupuesto de 119 euros. Me comunicaron que la pieza se había agotado y me animé a arreglarlo yo siguiendo el tutorial. ¡arreglado por 12 € con destornilladores incluidos en el precio.
Thank you for your video, I was able to repair my v10 thanks to you ! It's great that you are talking us through the steps, most videos will only show us and put a little music.
thank you for making this video and helping us guide us through this process. could not have done it without your help. wishing you all the luck and love and kindness in this universe
Thanks you covered not only disassembly but reassembling, As someone else said the V10 needs aT8 Torx, which I had to go and buy It took me about 2.5 hours and saved me hundreds of GBP
Excellent video!! I just finished replacing my trigger after following this video. My trigger was broken in the exact same place as yours. Got the part and the toolkit from Amazon, and, after a week, I'm vacumming again. Thank you so much. Your video it's been very helpful.
Fantastic! Just did it. You better are equipped with good tools to do it. Specially almost at the end of the dissembling you need a torx T9 (as before) but long and thin. Also a flexible adapter to reach some torx T9 as angle and space is minimum, this T9 is a must
Great video, thanks for uploading. A fiddly job for sure, but worth the effort for the money saved. I found a PZ1 and a long reach Torx T8 screwdriver to be perfect for this.
Hello thank you very much, this video will help me a lot, my V11 has had this problem for a few days, so I'm going to buy a reinforced model, and change it Thank you very much, it's very well explained!
I bought the new part (reinforced) because the original part is thin and I think it's just right and it will break in time, so finally, yesterday I did the assembly, disassembly, and replacement of the defective part with your video, and frankly nickel, I'm delighted, it was rather fast and it is working again Thank you, it helped me a lot
Огромное спасибо за это видео! Благодаря вашему видео я смог легко поменять курок пылесоса! Все было снято очень подробно и четко! Это мне очень помогло! Спасибо!
Thank you for the helpful video! Unfortunately, the display no longer turns on and the vacuum cleaner is pulsing. Could you please let me know what I might have done wrong?
thanks for the help. I was confused with the trigger when re assembling it as it wasn't springing out to the off poison until I saw you slide the battery back in place then it was all clear. the other thing I had trouble with was power leads connecting to the motor. After bending then up to get them out I found it difficult to get correct angle without putting a lot of pressure on the housing which I ended up doing.
I'm glad I could be of help. Yes, some operations can cause problems. The important thing is that you managed to get over it and the vacuum cleaner is functional again.
Thanks for this video, I have saved myself 125€. Dyson wanted I paid 125€ to repare this broken peace, for me it's a robery. I'll put a complain about it.
Great Vid, followed it for my V11 which was slightly different. Only problem I face now is after putting it all back together and sticking the battery in, is it turns on and stays on, from what I've read elsewhere its because i didn't push the trigger mechanism high enough or the new trigger is slightly longer - not sure. But people typically file down the black trigger button on the battery and it fixes this issue. So will have to do that.
I've changed my dyson v10's trigger but when I put battery on it starts running and does not stop. I suspect that my triggers tail is longer than it should be. Do you have any suggestions?
Great video but it should be noted that before I pulled out the trigger assembly at around the 5:50 mark, there was a screw that I had to take out first. At first I pulled and pulled and finally shined a flashlight inside to discover the screw! Maybe Dyson changed their design but definitely should be added to the video.
Hello! This is a very good question. In my opinion, the button fails due to a design issue with the button, the button having a weak area that fails when high pressure is applied repeatedly. In my opinion, using an accessory like the one you mention would help because the pressure applied to that button will be constant and, certainly, lower than those pressure spikes when the vacuum cleaner is used without such an accessory.
Yes, it would be a good idea to try pressing the button with less pressure. Otherwise, the only option would be to replace the existing button with a model that has a stiffened area where the button frequently fails.
I think you did not mount the module containing the hall sensor correctly. It is a small PCB that is mounted in the upper part near the selector button.
I accidentally ripped the white and black wires off the board. I thought I stuffed it up but I tried putting it back to the two holes and it seems to be working and charging fine. Would you know what the two wires are for if I will have any issues later down the track?
The two wires you refer to are connected to the connector that powers the brushes. If those wires are not installed correctly, the motorized brushes will not work. So, make sure they are connected correctly in the electronic board. You just have to simply push them into the dedicated holes.
Mine still wouldn’t work after replacing the trigger. The battery and the trigger works, yes but the vacuum doesn’t. Could I have ruined the circuit or some other part while replacing the trigger? When the filter isn’t placed and I pull the trigger, the filter light doesn’t turn on. Thank you.
What model of vacuum cleaner? Before changing the button, did it work properly (except for the button problem)? Maybe you didn't mount the small white connector with thin wires correctly.
To everyone that put the vacuum back together and is horrified that it's not turning on - as I was - but instead only briefly shlwing three blue lines: it means you didn't plug the small white square connector back to the electronic board in properly. I suggest you go back, really push it in (it should click) and even add a nice layer of glue like it was when you opened it. Works like a charm after this!
You can use M3 screws, but they should not be longer than 7mm (thread length). Make sure you tighten them well to avoid imperfect contact and overheating of the connectors.
Всё чётко по этапно повторяя за видео можно поменять за пол часа! Но есть одно но! Последний шурупчик который внутри ручки, он падла😂 под него нужна тоненькая отвёртка звёздочка, который не во всех магазинах продеться эта кнопка продаться на озоне вместе с отвёрткой берите отвёртку сразу если нет таковой, переходники не пролезут нужна именно тоненькая отвёртка
Просчет конструкторов Dyson. Массовые поломки этих кнопок. Кнопка многофункциональная, нажал - вкл, еще раз нажал - выкл. Кнопка слабо усилена. Чтобы до нее добраться нужно разобрать весь пылесос, еще и двумя типа бит. В 10 модели еще с сделана заливка кампаундом печатной платы и контактов( в 11 серии убрали заливку). Есть три типа кнопок в продаже : простая, усиленная с али, и родная. Я бы предьявил заводу дайсон претензию за столь дилетанский подход к конструкции. Сидят теоретики , рисуют на компах. Их пальчики приспособлены только , чтобы буквы на тачскрине телефона нажимать.
Кнопка сломалась после 4 лет использования, на озоне за 600 руб заказал. В сервисе 3к сказали. То и то норм вроде. Но самое интересное, что пиндосам заряжают за ремонт по 200$ + судя по комментам)
I followed the video and changed the new trigger, as soon as I inserted the battery without pushing the trigger, the vacuum turns on and won’t stop. Any clue?
Did you figure this out? I'm having the same problem. I have the white panel open, and I'm trying to avoid disassembling the next part which was tricky. When the battery is in, it feels like the trigger has a good range of motion.
I had the same problem. I figured it might be the new trigger being a little bit too long, applying pressure on the switch prematurely. So I took a blade and cut off around 2mm of the edge. That worked for me.
Before watching the video I had my Dayson V10 not working, now after changing the red button that had it broken, it is working all the time and does not stop. What can I do?
Carefully follow the steps from minute 7:00. You have to make sure that the trigger is fully pushed and that it is fixed with the screw. It seems that the trigger is not fully pushed and the red button permanently activates the button on the battery.
Bonjour, J’ai fait exactement ce qui est montré sur la vidéo, mon bouton est réparé mais l’appareil ne démarre plus. Quand j’appuie sur le bouton de démarrage la Batterie clignote bleu 10 fois. Pourriez vous m’aider ? Merci beaucoup
Bonjour, Your issue (battery led blinks 10 times) can be caused by these reasons: 1. you forgot to plug the small connector that powers up the mainboard: ruclips.net/video/fjWZKlPlqCE/видео.html 2. maybe the same connector got damaged somehow or is not properly connected. You can check if the mainboard is powered up by pressing the button placed on the display. If the display shows nothing, probably there is a problem with the connector. 3. the mainboard is damaged
@@techfixPOV La carte mère doit donc être endommagé .. parce que le connecteur est bien branché et mon écran s’allume bien, seulement le moteur ne démarre pas.
Before replacing the button, did it work fine? I mean, are you sure that only the button was broken? Because if it worked fine before, maybe something happened at reassembly. Maybe the battery terminals are not tight enough on the mainboard or are getting in touch with each other.
@@techfixPOV oui l’aspirateur fonctionnait avant le remplacement du bouton, mais comme le bouton était cassé il avait du mal à démarrer, une fois que j’ai remplacé le bouton, j’ai pu voir que ça fonctionnait car dès que j’appuie sur le bouton la batterie clignote bleu. Je pense effectivement que c’est lors du remontage que quelques choses c’est passé. Mais j’ai tout démonter et remonter plusieurs fois et je n’arrive pas à trouvé mon erreur, j’ai l’impression de tout avoir bien remonté et pourtant il doit y avoir une erreur. Merci beaucoup pour tes réponses rapides en tout cas !
Make sure that the small white connector with red and black wires is mounted correctly (11:00). Also make sure that the two terminals fixed with screws are tight and do not come into contact with each other.
The thing that you take out at 2:39 ( with black and red wire) broke. The plastic white where the wires go. Now I have the wires free. Is there anyway to fix it? Thank you.
Наука
I had this exact issue and was quoted £130 and a 4 week waiting time by a local vacuum repair shop. I bought the part for a few quid on eBay, and following this guide, was able to complete the replacement myself in about an hour! Thank you for this video!
For anyone else trying this I would highly recommend having good tools for it, such as the long screwdrivers with decent handles on them in the video, I had to muddle through with some cheap tools which made it much harder (but still doable!).
You`re welcome. I`m glad it helped. For sure you will need good tools, especially for the torx screws (T8). I also uploaded a new video (3 ways to fix the broken trigger issue). Is more detailed and gives you more options to solve this issue.
Dziękuje za pomoc . Bez tego filmiku nie wiedziałbym jak wyciągnąć włącznik . Pozdrawiam
Glad it helped!
Thank you so much! I had the same issue with my V10, so I 3D printed a new trigger part and followed your video. The Dyson works great and more importantly the wife is happy!
Glad it helped!
Thank you so much. Lifesaver! Dyson would NEVER publish such a tutorial. The planned obsolescence is part of their business plan!
Glad it helped!
I just finished repairing my V11 and I'm so proud of myself! Thank you so much for this detailed video, it helped me every step of the way.
Yes, you should be proud of yourself, you managed to fix it and there is no need to replace it with a new one.
Thank you so much you saved me a new vacuum cleaner.
I'm glad I could be of help. Cheers!
Me too! Tricky but well worth the effort. Thank you 🙏
Thank you for the very detailed video. I was able to replace the push button and everything works great. You save me $600!
I'm glad I could be of help. Cheers!
Great video, thanks a million, you’re 100% right they don’t make it easy to take them apart !
But you definitely do ! Dyson much like other manufacturers seem to put hi usage parts in their appliances, made of plastic, probably hoping when it breaks you’ll go buy a new one ! Thanks again 😄
Thanks for watching!
That was a perfect video! Even the stops for showing the plastic pulled back as wide as a finger. I was able to repair my V10 within 1 hour.
Thank you! I`m glad it helped.
Muchas gracias. En Dyson me dijeron que tenia que cambiar toda la pieza y me dieron un presupuesto de 119 euros. Me comunicaron que la pieza se había agotado y me animé a arreglarlo yo siguiendo el tutorial. ¡arreglado por 12 € con destornilladores incluidos en el precio.
Glad it helped!
Thank you for your video, I was able to repair my v10 thanks to you !
It's great that you are talking us through the steps, most videos will only show us and put a little music.
Glad I could help
thank you for making this video and helping us guide us through this process. could not have done it without your help.
wishing you all the luck and love and kindness in this universe
Glad it helped
Thanks you covered not only disassembly but reassembling,
As someone else said the V10 needs aT8 Torx, which I had to go and buy
It took me about 2.5 hours and saved me hundreds of GBP
I'm glad I could be of help.
I used Torx T9
Excellent video!! I just finished replacing my trigger after following this video. My trigger was broken in the exact same place as yours. Got the part and the toolkit from Amazon, and, after a week, I'm vacumming again. Thank you so much. Your video it's been very helpful.
Glad it helped
Great video, stopped watching another similar halfway and switched to this.
Much better!
Thank you! Glad it helped!
Found the trigger online, this video was by far the most helpful i found, thanks
Glad it helped
Excellent tutorial video. It helps tremendously. My V10 now works perfectly again :)
Glad it helped
Excellent video, straight to the point. Thank you.
Glad it helped!
Fantastic! Just did it. You better are equipped with good tools to do it. Specially almost at the end of the dissembling you need a torx T9 (as before) but long and thin. Also a flexible adapter to reach some torx T9 as angle and space is minimum, this T9 is a must
That's right, without good quality tools, it could become very frustrating.
… from Spain… thank yo so so much!!!
Imposible without your help 🤗
✌️
Happy to help!
You are a life saver, thank you for sharing your great video
Glad to be of help!
Excelente trabajo mostrando todos los pasos para desmontar y volver a montar el gatillo de Dyson V10. Le felicito y le agradezco
¡Me alegro que haya sido útil!
Desde Granada, España, muchas gracias! Te debo una cerveza 😊
Me alegro de haber podido ser de ayuda! :)
Thank you so much for guidance. Within an hour replaced trigger switch. 👍👍👍👍
Glad it helped
Great video, thanks for uploading. A fiddly job for sure, but worth the effort for the money saved. I found a PZ1 and a long reach Torx T8 screwdriver to be perfect for this.
Glad it helped!
Thank you so much. You saved us a lot of money❤
I'm glad I could be of help.
Excellent tutorial video. Thank you!
Glad it was helpful!
Hello
thank you very much, this video will help me a lot, my V11 has had this problem for a few days, so I'm going to buy a reinforced model, and change it
Thank you very much, it's very well explained!
I'm glad it helped. Cheers! :)
I bought the new part (reinforced) because the original part is thin and I think it's just right and it will break in time, so finally, yesterday I did the assembly, disassembly, and replacement of the defective part with your video, and frankly nickel, I'm delighted, it was rather fast and it is working again
Thank you, it helped me a lot
You`re welcome! I`m glad it helped. Enjoy your working machine! I hope you got one spare button, just in case... Cheers, mate!
Wow.....Perfecto, tu video es genial, muchas gracias, saludos desde España!!!
Me alegro haber podido ser de ayuda.
@@techfixPOV gracias a tí he podido arreglar la Dyson de mi padre, y si la mía falla algún día pues también sabré arreglarla.... MUCHAS GRACIAS!!!!
Огромное спасибо за это видео! Благодаря вашему видео я смог легко поменять курок пылесоса! Все было снято очень подробно и четко! Это мне очень помогло! Спасибо!
Glad it helped!
Fantástico!!! Muchas gracias desde España!!!
Me alegro haber podido ser de ayuda.
Dzięki super materiał bardzo mi pomogłeś. Pozdrawiam z polski.
Cieszę się, że było pomocne!
Thank you for the helpful video! Unfortunately, the display no longer turns on and the vacuum cleaner is pulsing. Could you please let me know what I might have done wrong?
Thankyou!!!! You saved me a lot of money! 🎉🎉
I'm glad I could help :)
Thank you very much. You are the best. Perfect video 👍
Thank you too!
thanks for the help. I was confused with the trigger when re assembling it as it wasn't springing out to the off poison until I saw you slide the battery back in place then it was all clear. the other thing I had trouble with was power leads connecting to the motor. After bending then up to get them out I found it difficult to get correct angle without putting a lot of pressure on the housing which I ended up doing.
I'm glad I could be of help. Yes, some operations can cause problems. The important thing is that you managed to get over it and the vacuum cleaner is functional again.
Thanks for this video, I have saved myself 125€. Dyson wanted I paid 125€ to repare this broken peace, for me it's a robery. I'll put a complain about it.
Glad it helped!
拍得非常仔細。成功換了按鍵。
Glad it helped!
Muchas gracias!!!me ayudado mucho el video!!
Glad it was helpful!
Muchas gracias, lo hice bien Gracias a tu vídeo ❤
I'm glad it was helpful.
Thanks a lot for this video!
Glad it was helpful!
Спасибо брат🤗 благодаря тебе сэкономила время на сервисе👍👍👍👍👍
Bester Mann! Super Video-Vielen Dank!!!
Thanks!
Thx a lot man! Useful af
Glad to be of help!
Great video! Congrats and thanks! ;-)
Thank you! I`m glad it helped!
Excellent video thank you very much
Glad it helped!
Thank you so much!!!!!!! 👑👑👑
You are so welcome!
Thanks! 1 screw is hard to reach but all good
Glad it helped!
Thank you very much.
You are welcome!
Thank you!!!!🎉🎉
You're welcome!!
Thank you! But you make it look so easy haha
Happy to help!
Great Vid, followed it for my V11 which was slightly different. Only problem I face now is after putting it all back together and sticking the battery in, is it turns on and stays on, from what I've read elsewhere its because i didn't push the trigger mechanism high enough or the new trigger is slightly longer - not sure. But people typically file down the black trigger button on the battery and it fixes this issue. So will have to do that.
That has happened to me, in the end how do you fix it?
@@sys1237 filed down the trigger button. But I wouldn't really call this a fix tbh. Because every now and again it still sticks.
I've changed my dyson v10's trigger but when I put battery on it starts running and does not stop. I suspect that my triggers tail is longer than it should be. Do you have any suggestions?
5:46 Just make sure that you removed the screw before pulling out the assembly! If not, you will end up breaking something like I did.
The screw you refer to is removed at 1:00 ruclips.net/video/fjWZKlPlqCE/видео.htmlsi=FrtoZU1sR_QImwRd&t=60
You are right! I might have missed it. My bad!@@techfixPOV
Great video but it should be noted that before I pulled out the trigger assembly at around the 5:50 mark, there was a screw that I had to take out first. At first I pulled and pulled and finally shined a flashlight inside to discover the screw! Maybe Dyson changed their design but definitely should be added to the video.
The screw you refer to is removed at 1:00 ruclips.net/video/fjWZKlPlqCE/видео.htmlsi=FrtoZU1sR_QImwRd&t=60
Thanks!!! ❤
You're welcome 😊
The Best.
Thank you!
Спасибо за видео!
Glad it helped!
Is there a good trick to get the switch back in its position I have pushed as hard as I can and it will not pop back into place no matter what I try
Thank you
You're welcome
Gracias!
Glad it helped!
Hey ! Is it good to use thé little accessory that Block thé button when you use it ? Will it help not to break it ? Thank you
Hello! This is a very good question. In my opinion, the button fails due to a design issue with the button, the button having a weak area that fails when high pressure is applied repeatedly. In my opinion, using an accessory like the one you mention would help because the pressure applied to that button will be constant and, certainly, lower than those pressure spikes when the vacuum cleaner is used without such an accessory.
@@techfixPOV thank you for your answer, that makes sense !
Огромное спасибо
Glad it helped!
How do I get the trigger part out of the handle? Do I have to do anything more than then just pull it out?
Do not forget to remove the screw that blocks the trigger. I dismantled it in the first part of the video.
Hello! Could you give me a tip on how to prevent the trigger from breaking, eg not pushing it all the way in?
😅
Yes, it would be a good idea to try pressing the button with less pressure. Otherwise, the only option would be to replace the existing button with a model that has a stiffened area where the button frequently fails.
thx for the videoo!! now the speed selector doesn't work. the dyson only runs at full speed. any solutions?thx
I think you did not mount the module containing the hall sensor correctly. It is a small PCB that is mounted in the upper part near the selector button.
I accidentally ripped the white and black wires off the board. I thought I stuffed it up but I tried putting it back to the two holes and it seems to be working and charging fine. Would you know what the two wires are for if I will have any issues later down the track?
The two wires you refer to are connected to the connector that powers the brushes. If those wires are not installed correctly, the motorized brushes will not work. So, make sure they are connected correctly in the electronic board. You just have to simply push them into the dedicated holes.
Thank you, it’s working fine since so I must have pushed them In correctly. Phew.
ottimo
Glad it helped!
Mine still wouldn’t work after replacing the trigger. The battery and the trigger works, yes but the vacuum doesn’t. Could I have ruined the circuit or some other part while replacing the trigger? When the filter isn’t placed and I pull the trigger, the filter light doesn’t turn on. Thank you.
What model of vacuum cleaner? Before changing the button, did it work properly (except for the button problem)? Maybe you didn't mount the small white connector with thin wires correctly.
СПАСИБО 🙏
Glad it helped!
To everyone that put the vacuum back together and is horrified that it's not turning on - as I was - but instead only briefly shlwing three blue lines: it means you didn't plug the small white square connector back to the electronic board in properly. I suggest you go back, really push it in (it should click) and even add a nice layer of glue like it was when you opened it. Works like a charm after this!
Vorrei sapere perché invece non stacca più la batteria. Sarà difettoso il grilletto?
¡Gracias!
Muchas gracias, me has ahorrado 109 euros!!
Thanks for the reward! I'm glad the video was helpful!
Круто 👍👍
Thanks!
anyone know where the screws for the two power cables can be found if someone "ahem" misplaced them?
The two silver screws at 10:45 in the video
You can use M3 screws, but they should not be longer than 7mm (thread length). Make sure you tighten them well to avoid imperfect contact and overheating of the connectors.
Это было великолепно!
Спасибо!
Всё чётко по этапно повторяя за видео можно поменять за пол часа! Но есть одно но! Последний шурупчик который внутри ручки, он падла😂 под него нужна тоненькая отвёртка звёздочка, который не во всех магазинах продеться эта кнопка продаться на озоне вместе с отвёрткой берите отвёртку сразу если нет таковой, переходники не пролезут нужна именно тоненькая отвёртка
Просчет конструкторов Dyson. Массовые поломки этих кнопок. Кнопка многофункциональная, нажал - вкл, еще раз нажал - выкл. Кнопка слабо усилена. Чтобы до нее добраться нужно разобрать весь пылесос, еще и двумя типа бит. В 10 модели еще с сделана заливка кампаундом печатной платы и контактов( в 11 серии убрали заливку). Есть три типа кнопок в продаже : простая, усиленная с али, и родная.
Я бы предьявил заводу дайсон претензию за столь дилетанский подход к конструкции. Сидят теоретики , рисуют на компах. Их пальчики приспособлены только , чтобы буквы на тачскрине телефона нажимать.
Кнопка сломалась после 4 лет использования, на озоне за 600 руб заказал. В сервисе 3к сказали. То и то норм вроде. Но самое интересное, что пиндосам заряжают за ремонт по 200$ + судя по комментам)
I followed the video and changed the new trigger, as soon as I inserted the battery without pushing the trigger, the vacuum turns on and won’t stop. Any clue?
I think you didn't push the trigger hard enough inside the case and the button on the battery is pressed by the button you replaced.
I followed the instructions and it works again! However I can’t get it to stop. If the battery is in it keeps running. Where did I go wrong?
I think you didn't push the trigger hard enough inside the case and the button on the battery is pressed by the button you replaced.
Did you figure this out? I'm having the same problem. I have the white panel open, and I'm trying to avoid disassembling the next part which was tricky. When the battery is in, it feels like the trigger has a good range of motion.
I had the same problem. I figured it might be the new trigger being a little bit too long, applying pressure on the switch prematurely. So I took a blade and cut off around 2mm of the edge. That worked for me.
Before watching the video I had my Dayson V10 not working, now after changing the red button that had it broken, it is working all the time and does not stop. What can I do?
Carefully follow the steps from minute 7:00. You have to make sure that the trigger is fully pushed and that it is fixed with the screw. It seems that the trigger is not fully pushed and the red button permanently activates the button on the battery.
Demasiado laborioso.. hay que tocar muchas piezas.
Si tiene paciencia y las herramientas adecuadas, definitivamente podrá realizar esta reparación.
Bonjour,
J’ai fait exactement ce qui est montré sur la vidéo, mon bouton est réparé mais l’appareil ne démarre plus. Quand j’appuie sur le bouton de démarrage la
Batterie clignote bleu 10 fois.
Pourriez vous m’aider ?
Merci beaucoup
Bonjour,
Your issue (battery led blinks 10 times) can be caused by these reasons:
1. you forgot to plug the small connector that powers up the mainboard: ruclips.net/video/fjWZKlPlqCE/видео.html
2. maybe the same connector got damaged somehow or is not properly connected.
You can check if the mainboard is powered up by pressing the button placed on the display. If the display shows nothing, probably there is a problem with the connector.
3. the mainboard is damaged
@@techfixPOV La carte mère doit donc être endommagé ..
parce que le connecteur est bien branché et mon écran s’allume bien, seulement le moteur ne démarre pas.
Before replacing the button, did it work fine? I mean, are you sure that only the button was broken? Because if it worked fine before, maybe something happened at reassembly. Maybe the battery terminals are not tight enough on the mainboard or are getting in touch with each other.
@@techfixPOV oui l’aspirateur fonctionnait avant le remplacement du bouton, mais comme le bouton était cassé il avait du mal à démarrer, une fois que j’ai remplacé le bouton, j’ai pu voir que ça fonctionnait car dès que j’appuie sur le bouton la batterie clignote bleu. Je pense effectivement que c’est lors du remontage que quelques choses c’est passé. Mais j’ai tout démonter et remonter plusieurs fois et je n’arrive pas à trouvé mon erreur, j’ai l’impression de tout avoir bien remonté et pourtant il doit y avoir une erreur.
Merci beaucoup pour tes réponses rapides en tout cas !
I’ve done something wrong - worked again for 5 mins and now red constant light ? Anyone know what I’ve done?
Make sure that the small white connector with red and black wires is mounted correctly (11:00). Also make sure that the two terminals fixed with screws are tight and do not come into contact with each other.
Neden motorun üstü plastik kaplı? Ben kendi motorumu açtım bende de var , ben daha önce tamir edildiğini düşündüm bu yüzden daha fazla devam edemedim.
The role of that plastic is to protect the electronic board from dust, water and vibrations.
Wow! Dyson don’t make it easy to replace that part!!!! 😳
That's right, it's not the easiest thing to do. But with a lot of patience and the necessary tools it is not impossible.
Not sure I could do this !!
Sure you can! Make sure you have the new button, a plier and two screwdrivers (phillips, torx t8).
This device is such junk 😅..... I replaced the switch on mine I've never held anything so cheap.
전세계 공통으로 이 지랄하는거면, 리콜해야 되는거 아니냐...내 다이슨도 스위치 사망했는데...아 열받는다.
The thing that you take out at 2:39 ( with black and red wire) broke. The plastic white where the wires go. Now I have the wires free. Is there anyway to fix it? Thank you.
Try to solder both wires directly to the motherboard.