Cheapest $5 Xiaomi Temperature / Humidity Sensor now runs on Zigbee!
HTML-код
- Опубликовано: 19 окт 2024
- Telink Flasher: atc1441.github...
Some items in my smart home:
Zigbee smart bulb: s.click.aliexp...
Shelly Uni: s.click.aliexp...
Athom 4 gang switch: s.click.aliexp...
ESP32 Dev board: s.click.aliexp...
Shelly 1: s.click.aliexp...
Shelly Dimmer: s.click.aliexp...
CO2 Sensor: s.click.aliexp...
Great contiuous super bright LED Strips with no dots : s.click.aliexp...
Weather station: s.click.aliexp...
Broadlink Pro for controlling IR devices like TVs: s.click.aliexp...
Athom local control ESPHome smart plugs:s.click.aliexp...
Zigbee smart blind controller: s.click.aliexp...
Raspberry Pi: s.click.aliexp...
Kingston SSD RAM: s.click.aliexp...
Ice Tower Cooling Fan: s.click.aliexp...
Some of the links above are affiliate links, where I earn a small commission if you click on the link and purchase an item. You are not obligated to do so, but it does help fund these videos in hopes of bringing value to you!Some items in my smart home:
Zigbee smart bulb: s.click.aliexp...
Shelly Uni: s.click.aliexp...
Athom 4 gang switch: s.click.aliexp...
ESP32 Dev board: s.click.aliexp...
Shelly 1: s.click.aliexp...
Shelly Dimmer: s.click.aliexp...
CO2 Sensor: s.click.aliexp...
Great contiuous super bright LED Strips with no dots : s.click.aliexp...
Weather station: s.click.aliexp...
Broadlink Pro for controlling IR devices like TVs: s.click.aliexp...
Athom local control ESPHome smart plugs:s.click.aliexp...
Zigbee smart blind controller: s.click.aliexp...
Raspberry Pi: s.click.aliexp...
Kingston SSD RAM: s.click.aliexp...
Ice Tower Cooling Fan: s.click.aliexp...
My gear:
Rode Wireless Go Mic: s.click.aliexp...
Camera: s.click.aliexp...
Some of the links above are affiliate links, where I earn a small commission if you click on the link and purchase an item. You are not obligated to do so, but it does help fund these videos in hopes of bringing value to you!
![Chino Pacas - Modo Capone (with Drake & Fuerza Regida) [Video Oficial]](http://i.ytimg.com/vi/zjv8TQ0gBkg/mqdefault.jpg)
After bricking one a few weeks ago I plucked up the courage to try again and this time it went without a hitch. Thanks.
Awesome news, thank you so much for letting me know :)
I actually grabbed 4 of this sensors, and it took me about 5 minutes and I was able to add this to zigbee without too much issue. I am going to put these around the house, so I am quite pleased.
While I was setting this up I thought I might have to register it with Xiaomi, but no I was able to keep it all local.
Fantastic, thank you for the feedback!
Did you connect the sensors to the Xiaomi hub?
@@erdadj No, they connect to the Zigbee radio which is connected to home assistant
@@erdadj No, they connect to my Sonoff zigbee radio
It actually only took about 5 minutes to show up in my ZHA, no need to link to it!
Enjoying the pink backlight
Thank you :)
thank you for the information, worked perfectly! Is there anyway to get the display to show in Fahrenheit? in Home assistant it shows F, but on the LCD screen its C.
Hi there Bobby, so glad it worked for you! Sorry I can't seem to find a way to change the display to F
Do you have a measurement device to see the (very low) current draw difference between the two firmware’s? Working out how long the button cell will last is fairly important as the larger 2 AAA zigbee versions of this kind of sensor might be better in that dimension, replacing batteries is easy except when it’s 12 every n months.
Hi Bruce no I don't have a method for measuring the current draw. I will keep an eye on the battery levels. What I can say is that the Zigbee reporting frequency seems to be quite large, like 30 mins. Let's hope this means low current draw
My Xiaomi seams to be the same as your´s but I got this massage: Size firmware is more 131072 bytes! Hardware Revision String: B2.0
Software Revision String: 0130.
Oh no that is really odd. I have flashed 3 of mine now and can't seem to replicate that error!
Its afterwards not possbile to connect the telink flasher with a pc again?
I don't think you can connect with bluetooth after they have been flashed to Zigbee. I don't seem to be able to find the ones I have flashed.
Thank you for the video
Only a pleasure, so happy that I got it working!
I found the mistake. The ATC __.bin has to be installed first and then the zigbee can be flashed
Yes that is right you do that by clicking the Zigbee button
Just remove the battery after flashing and put it back in and it will appear immediately in Z2M or ZHA
Great, thanks for your feedback Freier!
@@simonsayshomeassistant great job
Any know way to get them back to ble (after flashing them to zigbee) ?
Got 6 and got 4 of them to zigbee and kept other 2 on BLE. After a couple months the zigbee ones are at 23% while the ones on BLE are at 77% (all were brand new)
Sorry , I can't seem to find a way to convert them back, please let me know if you do find a way1
I'm a bit confused, at 2:21 you enable the features and then at 2:21 you connect. What are you using to connect?
Sorry for not explaining clearly, you go back to the telink flasher and press connect
@@simonsayshomeassistant Thank you
Just to be clear, i gather i open the flasher in a normal browser correct? Or am i doing it in home assistant somehow?
@@robcork2620 Yes, you open the flasher in the browser, I find that Chrome works well!
How often does it updates when o zigbee? And how often it updated before? I have an old rounded version that updates every few seconds on HA over Bluetooth and I want to get more real time data updates.
It seems to update less often on the zigbee protocol and there is no option to change the frequency. On BT you can change the setting
How to spot the right version? There is one which can't be flashed to use zigbee.
Check out the link in the video description
why do we need to flash it to zigbee?
We don't, but it was in interesting process!
After trying the ZigBee version. I can not recommend to anyone. As the battery life was so terrible. It drains it in 3 days. Yes form 100% to 0% in 3 days only.i was Lucky enough to get back the bluetooth firmware without soldering.
Thank you for your feedback, did you try changing the advertising interval, this should improve battery life the longer you make it update
I will try this whenever I will have some free time to spend with it. Otherwise I'm very satisfied with the BL custom frameware. It's boulet proof as you mentioned in the video.
@@yassinevic Yes, the BLE works really well!
I have just created a new HA instance and the zigbee converted sensor will not connect! Any ideas anyone?
Is there a way to flash bt firmware back to a zigbee one without owning a zigbee gateway? Thanks
They don't seem to show up in the telink flasher any more so I don't think you can
Seems like there's a version 3 now
Interesting I will check it out
Well, I bricked mine, lol
Oh no sorry to hear that!
oh noooo :/
20:42:50: Connecting to: LYWSD03MMC
20:42:59: Hardware Revision String: B1.5
20:42:59: Software Revision String: 0159
20:42:59: Firmware Revision String: 2.1.1_0159
20:42:59: Detected Mi device
20:42:59: (!) Version: 2.1.1_0159 is temporarily not supported (!)
20:42:59: Disconnected.
Oh no, just tried it again and I am getting this error: Size firmware is more 131072 bytes! It looks like they are doing some changes to the firmware. I would recomend trying it again in a few days time, hopefully they will have sorted it out
@@simonsayshomeassistant tks for your video, I also have the same error with my old firmware ATC_3.7, but when I update to ATC_v4.6 first, and then update zigbee firmware, it 's ok now.
Cool, thanks for the feedback. That is a big help! @@huyhoangphamanh1825
You should probably work on your editing and transitions.
Yes, these are basic how to videos!
I will work on the quality