KUKIRIN G3PRO - Introduction P Settings - Speedhack- Zero Start - Cruise Control

Поделиться
HTML-код
  • Опубликовано: 7 сен 2024
  • Rain, Book And Cup Of Tea by | e s c p | escp-music.ban...
    Music promoted by www.free-stock...
    Attribution 4.0 International (CC BY 4.0)
    creativecommon...

Комментарии • 36

  • @Natsukashii1111
    @Natsukashii1111 Год назад +3

    thanks a lot for this video, my G3pro came by default with PA at 5 and I didn't know that so it was way too powerfull. Tonning it down helped me appreciate it a lot more!

    • @SYTROP14N
      @SYTROP14N Год назад

      That's correct my is also preset to 5, way too powerful for two motors, each start its almost spin the wheels, now set to 1 and is where it supposed to be.

    • @JohnOLooney
      @JohnOLooney 11 месяцев назад +1

      @@SYTROP14N same here , mine was set at 5 , its way to harsh, i set mine to 1

  • @itaco8066
    @itaco8066 4 месяца назад +1

    Great video
    Thank you!

  • @Prodigee1979
    @Prodigee1979 10 месяцев назад

    Why you want to leave Pb off (0) ? It's the E-brake strength and it's very important to have it ON if you want to brake/stop fast. If it's on 0 you will only use the normal brakes (front and back) and will have to buy new brakes too often, the e-brake is really important!

    • @clementevillalobos345
      @clementevillalobos345 8 месяцев назад +2

      The ebrake on this is way too powerful and unsafe. I barely squeeze the brake lever and it locks the brakes almost throwing me off. I have it set at 1 the minimum too. I don't like. Its very dangerous when front brake engage. The stopping is way too abrupt for normal riding around 15 mph. It's unfortunate it can't be set to activate at higher speeds. I might disconnect the electronic if I continue to experience this problem. I just feel safer in braking. The hydraulic alone suits me just fine. Light riders be aware of this problem.

    • @ladehier
      @ladehier  Месяц назад

      if the battery is full and your first drive are down hill mean you drive from a mountain down then possible also your battery get damaged. some battery have this problem. also you are right with other arguments.

  • @octavioborda3767
    @octavioborda3767 Год назад +5

    p07 work for only 1 of the 2 motors . so impossible de control speed on second motor …. useless

    • @ladehier
      @ladehier  Год назад +2

      Yes you are right. But the price is really ok.

  • @otakarlibal
    @otakarlibal Год назад +3

    Thanks for the video! Is there any way to keep the full power and full speed, but just improve the throttle response. It is way too sensitive. It feels like you go from 0 to 15% throttle and nothing happens, then you go from 15 to 16% it jerks forward and gives you like 70% and then the remaining 17 to 100% throttle just moves you from like 70% engine power to a 100%. If there is any way to make it linear and easier to control i would really appreciate

    • @JohnOLooney
      @JohnOLooney 11 месяцев назад

      the throttle is adjustable in the parameter settings , its set at 5 by default, toggle it down to 1 is my advice - its jsut too spicey bny default and youll pull your arms off

  • @kendallleary9991
    @kendallleary9991 Год назад +3

    Once driving how do you activate cruise control

    • @ricobico1872
      @ricobico1872 Год назад +1

      It does it automatically....do not recommend....

  • @faridskafee5392
    @faridskafee5392 7 месяцев назад

    I just want this monster to run without pushing. Help me with that through the settings

  • @abbiesekoum2249
    @abbiesekoum2249 11 месяцев назад +3

    What is the PA about ?

  • @iphone-repair-fuengirola
    @iphone-repair-fuengirola Год назад +2

    Good video

  • @ua2924
    @ua2924 Год назад

    Hello! Please tell me, is there a recovery on Kugoo Kirin G3 Pro?

  • @ggale1
    @ggale1 Год назад +4

    PB Not work. Why?

    • @linqu69
      @linqu69 Год назад +1

      I’d like to know that too, on the manual it says it would work, that would be important to work, without it brake pads wear out quickly.

    • @robertcseh4619
      @robertcseh4619 Год назад

      My Pb brake is also not working

    • @robertcseh4619
      @robertcseh4619 Год назад

      Who know what will be the problem please.

    • @Prodigee1979
      @Prodigee1979 10 месяцев назад

      Why you want to leave Pb off (0) ? It's the E-brake strength and it's very important to have it ON if you want to brake/stop fast. If it's on 0 you will only use the normal brakes (front and back) and will have to buy new brakes too often, the e-brake is really important!

    • @Prodigee1979
      @Prodigee1979 10 месяцев назад

      Set it to 5 or 4 then you feel it.

  • @SYTROP14N
    @SYTROP14N Год назад +1

    P7 is useless. I've set 33 as P7 value, and 2nd gear two engines still goes to 45km/h but 3rd gear is limited to around 35km/h. xD

  • @alexanderthegreatest5336
    @alexanderthegreatest5336 Год назад

    My G3 has a speed issue, it doesn't go faster than 15mph though i switch to mode 2 or 3, still same speed. Who can help me out?

    • @ricobico1872
      @ricobico1872 Год назад

      Go to setting PO7....Set it to 100....Long press

    • @deijannoreiga3924
      @deijannoreiga3924 Год назад

      @@ricobico1872mine is set to 100 and is still doing that

  • @Nutrient16
    @Nutrient16 Год назад +1

    This doesn't work for M5 pro

    • @ladehier
      @ladehier  Год назад

      Ok let me try out byself. Our tean was sick last 2 weeks. Let me come back to you with good news ;)

    • @maximljubavin9156
      @maximljubavin9156 Год назад +1

      Thank you we are waiting

    • @JohnOLooney
      @JohnOLooney 11 месяцев назад +1

      this is for the G3 pro, why would it work on a M5 Pro ?

  • @savas0012
    @savas0012 Год назад

    This doesn’t work for m5 pro

    • @ladehier
      @ladehier  Год назад

      its an G3 Pro. not all scooter have same functions and also not same way how to come inside the hidden settings

    • @alexandresquare
      @alexandresquare 11 месяцев назад

      same, but you still have part of the settings like cruise controll