Ooooh i like a bit of boat slomo! All that wake and splashing! I thought there was a nice balance in the vid. Its just the slomo shots are a little longer in frame because of the time difference. 👍
It's quite nippy for what it is. And yeah, no prop and rudder to foul on floating debris. And something I didn't mention in the video is that it has a removerble door on the pump housing. So you can access the pump impeller if anything does get sucked up. Which is very useful. Well thought out little boat.
@theminiatureconstructionco4556 I just ordered 2 one for me the other for my brother to race up a river. Key word "up" I think I might run on 2S for a while, then try 3S. My brother had a Feliun FT009 which was a brushed boat around the same size. That was only meant for 2S but it actually ran 3S with the only issues the Tamyia style connectors both for the battery and for the esc to motor burnt out. Direct soldered the motor and put xt60s for the battery, and it was all good on 3S. Given that you said both the ESC and motor stayed cool, it makes me think it will be fine with the only issue is the low battery alarm may no longer work, although you can always run a lipo alarm. If it fries on 3S it just means the stock electionics are unworthy and must be upgraded to brushless 😊
For me best reason too buy is the self rightening function! I run the Horizon Sprintjet and the china clone of it WL Toys W917.The Sprintjet suck every time water and was less power than the WL Toys .The WL Toys have a not so nice steeringcircle than the Sprintjet and suck only a few drops of water because i run white waters in small rocky brooks. Funny point the Wl Toys Maintainhatch fit right in the Sprintjet like a glove you only need to make lock for the hatch.The hatch from the Wl toys make the sprintjet much dryer! I swapp also a brushless setup in the sprintjep an even on 2S its now a "hell of a ride"with a steear on a dime turning circle! But both not realy "self rightening" because this i almost lost the boats several times ! I need to run in the water too catch it and i am wet all over me by slashing every step ha ha! I think self rigtening will help much for my "wild rides" ha ha! Nice Video!
Hi there I see that you had huina excavator rc well what I'm want to say is that I paid for a volvo excavator off ebay for little money with no remote control do you no where I can get one from our can you look in to see if it as a motor in side the excavator
Is there an official parts shop at the Huina website. Otherwise put you own electronics in. You can get 7 channel transmitters that may cover all the functions?
Stop doing so many slow motion shots!!! Can't see real time speed!!!!
Ooooh i like a bit of boat slomo! All that wake and splashing! I thought there was a nice balance in the vid. Its just the slomo shots are a little longer in frame because of the time difference. 👍
smart colour for such a vessel, makes it easy to find in the reeds
Absolutely!!! :)
I like how it stays nice and dry inside, these boats are soo much fun in little streams with white water.
Yes i,
ive got an orange one that was converted to brushless. And that was a right laugh in the stream by the house!!
Best value boat of 2024,ticks ALL the boxes!
Couldn't agree more. Very good for the money, with plenty of potential later on.
The deerc is the same but brushless, and faster.@theminiatureconstructionco4556
Could you please tell me what brand name thick assembly grease you use to help seal the cover hatch ?
Good review. Doesn't seem to have any issues. No prop swings it for me. Great patriotic exit music too! 👍
It's quite nippy for what it is. And yeah, no prop and rudder to foul on floating debris. And something I didn't mention in the video is that it has a removerble door on the pump housing. So you can access the pump impeller if anything does get sucked up. Which is very useful. Well thought out little boat.
What brand of assembly grease did he use to seal the hatch ? What color is it . I couldn't see any color in the video . Was it clear ?
Go down to Grrfy,s comment and ask him direct. Because it was his boat. I honestly couldn't tell you. But he will.
@theminiatureconstructionco4556 thank you 😊
Is it self righting?
If I remember correctly yes. It just rolls back over.
What size Brushed engine do they come with? ima make mine brushless
I bet you could put a 2845 brushless motor in it. 👍
@theminiatureconstructionco4556
So 390 then?
@@druscanam yeah I'm pretty sure they are. 👍
Excellent en lipo le moteur fait des étincelles lol
I will try it!
3S?
It may do. But I wouldn't like to risk it. 👍
@theminiatureconstructionco4556
I just ordered 2 one for me the other for my brother to race up a river. Key word "up"
I think I might run on 2S for a while, then try 3S. My brother had a Feliun FT009 which was a brushed boat around the same size. That was only meant for 2S but it actually ran 3S with the only issues the Tamyia style connectors both for the battery and for the esc to motor burnt out. Direct soldered the motor and put xt60s for the battery, and it was all good on 3S.
Given that you said both the ESC and motor stayed cool, it makes me think it will be fine with the only issue is the low battery alarm may no longer work, although you can always run a lipo alarm.
If it fries on 3S it just means the stock electionics are unworthy and must be upgraded to brushless 😊
@druscanam I would be very interested in knowing the result. It is very entertaining trying to get them up a small stream. 😄
@@theminiatureconstructionco4556 I have just ordered a loud voltage alarm for it , we may soon see !
For me best reason too buy is the self rightening function! I run the Horizon Sprintjet and the china clone of it WL Toys W917.The Sprintjet suck every time water and was less power than the WL Toys .The WL Toys have a not so nice steeringcircle than the Sprintjet and suck only a few drops of water because i run white waters in small rocky brooks. Funny point the Wl Toys Maintainhatch fit right in the Sprintjet like a glove you only need to make lock for the hatch.The hatch from the Wl toys make the sprintjet much dryer! I swapp also a brushless setup in the sprintjep an even on 2S its now a "hell of a ride"with a steear on a dime turning circle! But both not realy "self rightening" because this i almost lost the boats several times ! I need to run in the water too catch it and i am wet all over me by slashing every step ha ha! I think self rigtening will help much for my "wild rides" ha ha! Nice Video!
Self righting for the win! 😆👍
Very nice boat, but looks like it haves to much weight on the bow (front)
🔵🔵🔵🙂🙂🙂👍👍👍🔵🔵🔵
Do you think? Seems to handle nice.
Try a smaller battery of the same voltage and see@@theminiatureconstructionco4556
@@theminiatureconstructionco4556 I may add a couple of wheel balancing weights to the rear now I have worked out you can get the top off the hull
@grrfy worth a try. 👍
35 km heure max
That's not bad!
Hi there I see that you had huina excavator rc well what I'm want to say is that I paid for a volvo excavator off ebay for little money with no remote control do you no where I can get one from our can you look in to see if it as a motor in side the excavator
Is there an official parts shop at the Huina website. Otherwise put you own electronics in. You can get 7 channel transmitters that may cover all the functions?