Diverted Neutral Current Demonstration - Normal, Open CNE, Current Circulation (Part 2)
HTML-код
- Опубликовано: 20 сен 2023
- A demonstration of diverted neutral current using a 12V AC test rig. This represents two adjacent properties with TN-C-S supplies via a CNE (combined neutral and earth) cable and a shared extraneous conductive part.
Demonstration includes:
► normal operation
► current sharing between the CNE and bonding conductors
► what happens with an open CNE in one property and not in the adjacent one
► the situation with more than two properties all connected to the same extraneous part.
In all cases, current can be found in the bonding conductors connected to shared metallic parts such as gas or water pipes.
Note that this demonstration uses a custom manufactured test rig which runs on an isolated 12 volt AC supply. Some of the items shown would be dangerous if done with 230V or a real electrical installation. 
Наука
Acacia Road......Bananaman reference? God I loved that show as a child! 😊You're a legend and inspiration to us all John. Thanks for the much valued content! Mike.
I think it must be either a mistake or the Electrician may not be informed??? I am sure that they will have a diode connect to the earth so no voltage or current finds its way back, I am pretty sure that is the case, why would someone design something as bad as this?? If you were to connect a diode to it , it will not allow any current or voltage, thus it can flow into it but not the otherway around....And if there is a diod connected to it not to allow the reverse power etc, you can sitll be sure that all earth in a big building will have power as allot of it is flowing to it from leakage current etc, in building where it is no PEN SYSTEM ANYONE DARE TOUCH THOSE BIG EARTH WIRES, THUS THERE IS A PROBLEM IN THE EXPLANATION HERE... UNLESS some one was so stupid that he was totally blind to design a system like that, which I do not belive it is the case, inside that box somehwere there has to be a diode to make sure it does not allow revers power, but all other power on the earth in all system is commong it is leakage current and it is in all building not just for PEN system....
Lots of time and effort gone into that rig John. Well done.
Everyone else better step it up 😂
Had our gas meter removed. The meter guy had a big red "jump lead" to put across the meter during removal!
Just when I thought I'm finally reaching a understanding of why and whats happening. You say "your only scratching the surface and 3 phase is more complex". Excellent demonstration, thank you for your time and effort that goes into making these videos. I've learnt so much from you. Your 1 of the greatest minds in our industry.
I spent over 10 years working on the distribution networks and dropped neutrals caused everything from all electrical appliances in the properties failing (spectacularly if on different phases) to dead livestock, electrocuted Koi carp and several house fires. Great clear and concise video.
Then why is he afraid to remove my comments??? Think about it the system of PEN was designed by who?? An electrician or a phd engineer? Of course it would have been someone with phd so why would he make such a big mistake???? The system does not allow revers power did you know that, there is diode on the end of it with other protective system not to allow reverse power and john ward and others are going around revearling themselves ha ha ha ha. I have worked in all big buildings like BBC , National Audit office ITV TV building all of them or not PEN system and do you know how much leakage current flows to the earth in those building?? Anyone touching those earth rode will end up dead.... and it is nothing to do with PEN... Now do not remove my comments neither praise me but be thankful for learning....
Hi John thanks for this video.
I work in a quarry and one time after an electrical inspection , it was the next day in fact the asphalt plant operator called and said the plant was acting strange, various things weren’t working and some items had tripped. Anyhow I went up for a look and discovered very strange voltage levels at various points in the electrical panels. I eventually traced the problem which was in a three phase distribution board in the next building. The insurance inspector had disconnected the numeral conductor while testing and he never re-connected it. 🤦♂️
As you say the voltages across various circuits varied like crazy. It’s a wonder something didn’t get damaged.
I have now watched many of your videos over the last few years and must say that you, sir, are a truly excellent communicator
People ask me "is there any RUclips videos I can watch to help me learn about electrical theory?" I say watch John Ward.
Very well explained 👏
Hi John, From an old spark from the 60's. An excellent tutorial as usual, you definitely put some work in to that rig for the benefit to others, I applaud you. I often thought of this scenario and tried to visualise that having water and gas pipes buried would act as very effective earthing rods at the same time effectively parallel paths conducting current to the neighbours and also carrying current back to the substation at the same time thus would mitigate the need for a separate earth rod for safety to limit the touch voltage, please correct my if I'm wrong perhaps my 75 year old brain is defective also. I wait with exited anticipation for your next video, your and excellent communicator.
Peter.
your right the water, gas, and lead sheath on the incoming supply gave you a good earth untill the suppliers changed everything to plastic IEE REGS says it all how many times have they not got it right....obviously everything doesent go back to earth so fit an RCD as close to the meter as you can this will keep john out of your house as he seems to be more interested in whats going on in the neighbours house, mabe they fitted their own meter, and mabe john is colluding with the cartel to take the rest of your rights.
This is the best explanation of the topic that I have ever seen. Many thanks for the time and effort making your videos.
Perhaps we should all start running on 12V🤔😁
Joking aside you’ve successfully highlighted a very serious problem that will only become more prevalent over time. To truly test for dangerous voltages on disconnected bonding conductors (on a compromised system) we need to reference/ test it to true earth, meaning we need to put a temporary test rod in the ground far enough away form any of the properties in the street!!
Who said TNcS was the best earthing arrangement?😃
Thanks for this, very informative. Something to point out, even if you don’t have any current on your bonding conductor when disconnected at the time of testing, that’s not to suggest it doesn’t suddenly become live when someone down the road comes back from holiday and switches stuff on! I treat ‘earthing’ conductors as if they are live at all times, easier to respect it than be a victim! Thanks again 👍👍
Excellent video as ever JW, probably an issue that will happen more and more commonly as the network ages and not something electricians are necessarily going to be looking out for, can't wait for the horrifying 3 phase episode :)
Give the man a day off he's already done the rig for the single phase,,lol
Then again, in some dwelling/building situations, utilities are going more and more to plastic pipes all the way and so perhaps reducing the overall alternative return path impedance. But then some retrofitted plastic pipes are being fed up inside the existing metal ones (e.g. gas) so you probably still have bonded metal going into the ground. Perhaps even the water conductivity in plastic water pipes can become significant in neutral disconnect fault situations if everything is plastic? As a home-owner, I guess the lower the chance of other dwellings 'helping' with your circuit return in the fault case that just you have a disconnected neutral incomer, the more likely you are to get a shock situation but also the more likely you will find your appliances going 'crazy' or not working. It's a tricky bugger. Definitely worth checking the current on as many bond wires you can clamp around and measuring the potential between the two conductors of any 'earth' connection you disconnect before touching.
Fantastic video John. I knew the theory, but actually seeing it in a realistic installation, it now all makes perfect sense. Thank you.
That's very true there's only so much you can visually see in your brain,,, but when it's presented in that fashion it really does make sense
I remember the first time an engineer from our local supply company said "It's all PME now" and thinking do I trust a remote earth connection managed by the DNO? And here we are! Great work as always John. You are an asset to the trade. Thank you.
Greetings John, another great, clear and concise explanation
Also very handy use of transformer ratios to lower the voltage , increase the current but safely show the principles,,
Very well presented,,, I bet those lamps were getting hot!
Thank you for this!
Excellent tutorial as always John
I’ve been guilty of disconnecting main bonding clamps from pipes in the past, and not giving it a second thought.
This has opened my eyes!
Hello Mr John, thank you very much
Excellent!
This is an eye opener for sure
Well done John !
Brilliant video John!!
Excellent! I look forward to the 3-phase one!
Very interesting came across this recently when the gas board damaged a supply cable while digging. I have a lovely video sent to me by the gas fitter of the spark on the gas pipe lol
Brilliant rig John! Such a useful and well thought out training aid
Great demonstration. Thanks.
Fantastic demonstration, love your videos.
Brilliant video as always, cheers John
Highly instructive, thank you.
Thanks! great presentation!
Very nice demonstration 👍
Brilliant the way you describe things clearly and in a understandable way , love you videos 👍
Fantastic rig John
Looking forward to your next video. Thanks for this one
Round of applause! Much appreciated
Great presentation John and thanks for all the hard work you put into it
Another good down-to-earth explanation. Thanks, John.
Thank you J.W., excellent video, certainly an eye opener.
Nice video John, as usually ✌🏼⚡️
Clear and concise as usual, thanks.
Brilliant video
As always JW excellent explanation with the fault paths and great effort on the rig, looking forward to the three phase horror show!
Very helpful JW
Very thorough! Thank you ❤
Bloody excellent
A very informative demonstration as usual. I only vaguely knew this. Seeing this practical explanation was fist class.
Very Interesting John👍
Thank you John
Wow that’s actually quite scary! Thanks for making this video, definitely something to be aware of 😱
Magnificent content, thank you!
Thank you John. Your videos are brilliant. All the best.
Great video John. Surely this just goes to show that PME systems are shit and supplied because its cheaper. Also reason why its not allowed i believe to supply petrol stations.
Thanks for the great video and the amount of effort you've put in to build up such a great demo
Another fantastic explanation John on a subject a lot of us don't know enough about. Brilliant work on the demo rig!
Thanks John
thanks for all the hard work you put into that jig. much appreciated as always.
Fabulous John
Thanks for taking the time to produce this very educational video . Every day is a school day !
great video thanks
That was a very interesting and informative video John. Thank you.
Great subject explained as simply as possible
What a precise and accurate explanation supported by a superb demonstration, much appreciated. The test setup must have been a lot of work! Thank you John.
Brilliant content as always. Love the funky shirt. Keep up the great work John!
Superb John thankyou for the effort.
Amazing video. I would never have even considered this. you turned the principles in to a clear concise demonstration.
Incredible opens your eyes to what dangerous situations can arise due to a lost neutral or broken connection
Props to JW for taking his time.
Well done john ,
Regards antony,Warrington Cheshire..
Cheers JW great insight into this new electric blind danger - many thanks again 👍
Brilliant explanation John, very good rig a lot of time and effort put in, well done * * * * *
Great Video clear visual representation of what can happen
Very interesting and very informative.
Great rig john great work like always mate
Thanks for the effort to build all that, and for explaining it all and putting the videos together. Very informative!
Thank you very much for an interesting demonstration! Great explanation.
Excellent tutorial, impressive setup John.
Thanks for sharing
Superb teaching 'manner' and speed. RUclips needs people like you, JW. Thank you.
Step by step, methodically explained. It's an excellent training video. Love the shirt too 😊
Thanks, great explanation
Excellent video John I could show this to my students. Your rig is superb
thanks john this was very helpful and informative. i'm a gas man, electricity is weird. i struggle to get my head around it.
Excellent video, helps alot trying to get your head around this. Real world scenario is going to be alot more complex, quite daunting.
Thanks John, excellent part1 but your marvelous demo jig shows how complicated diverted neutral currents can be.
Exquisite....
It was a very interesting and educational lecture for us all, so thank you very much for setting it all up in such a brilliant way. 🙏
I watch all your stuff John. Top bannana. Ill be able to self certify soon and truth is these videos are a valuable resource for life long learning.
Excellent demo, as someone else mentioned obviously you have gone to a lot of trouble in order to create a great explanation, many thanks JW!
Great effort John. Great demo. Very difficult to calculate this stuff. So many different scenarios to deal with. Safe working Procedures will be easier to create than trying to calculate whether it's correct or not based on measured values at properties.
JW at his best, thanks for your time, effort & expertise in producing this excellent presentation ☘️🇮🇪☘️
Thanks
This has been very informative. As a ham radio operator the one thing I struggled to understand the most when I took my test was grounding and bonding. I remember learning about the different earthing configurations such as TN-C-S and I remember a situation being explained to me where if you have a really good low impedance RF grounding system you can run into issues where your RF ground ends up sinking current for your neighbours which can lead to an unsafe situation either risk of electric shock or the high currents melting your cables and burning your house down. I believe this is pretty much the exact same scenario but explained much better. My old house was TT a system with it's own ground rod outside which I seem to recall as being much less risky however it was made dangerous by some metal thieves who decided to steal the 8 inches of cable from where it came through the wall to the top of the ground rod so I had to replace that at one point. I now live in a house with a TN-C-S system and after moving in it needed a lot of work on the plumbing and we replaced a section of metal water pipe just after the service entrance with plastic but that was before the bonding so we added a cable to bridge the plastic part but as someone doing a bit of DIY plumbing I had no idea how dangerous that could be.
Great video from a total legend, thanks John! I’m off to buy a clamp on ammeter 😎👍❤️Update with the new ammeter our 45A instant shower gave rise to around 1A in our bonding conductor, will be interesting to see what happens around peak time 👍.
Excellant
Very informative. Makes my TT installation feel like a good thing!
How do you know its TT all the way?
@@haldo691 No connection between the incoming main and the house earth, which is a staked rod. Water main is plastic and no gas supply, so no metallic connections to another property. Not sure what else to say.
@@tubaman66 And is the water in a plastic pipe a conductor ????
@@pjeaton58 it'll be a pretty rubbish conductor over anything but a very short distance.
Very informative and interesting video. kudos Sir.
Hi John, thank you for your excellent and thought provoking video. I would be interested in how neutral earth faults in appliances only protected by an MCB interact with loss of CNE conductor on adjoining supplies. I think it might explain burned out neutral connections. Thanks.
👍👍👍Definitely the best explanation of this that I've ever seen!
I was thinking about how to set up a demonstration of Diverted Neutral Current in a 3 phase system where only a single phase supply is available to run the demonstration - I think I've worked out a way to get an isolated low voltage 3 phase supply from a single phase input with a reasonable power capacity at reasonable cost - let me know if you're interested.
Would be great to demonstrate with safe low voltages some of the weird, wonderful and lethal things that can happen with Diverted Neutral Current in a 3 phase system.
I love this demo. So easy to follow.
If you can't know ahead of time whether there could be a voltage on everything bonded to earth in the house you're working on until after you disconnect the bonding wire, how can you do that most safely so random residents in the house don't get shocked from trying to wash the dishes? Is there another tool you could put across that bonding link that would alarm the moment the voltage appeared and preferably re-link that connection to prevent shocks?
@mainly electrical , youtube, to learn my friend
mind blown