Great video but there is a plug by the emergency brake pedal.Bobs automotive mirrors sales a harness that plugs in an plugs into your radio .much easier no cutting soldering just plug an play .
Hi..On my Suburban, the video wiring seemingly went from the rear camera to the rear view mirror along the roof between the headliner and metal, and did not come down to the dash. The only wires I found for the camera that came down were power (activation).
Thank you.. As for the shielding.. I do not know if it is really necessary, but seeing how all was open already, for the few minutes it takes to cover, i did not want to chance NOT putting it. Now if you do not have aluminum tape, I would think wrapping it in aluminum paper and regular tape to hold it, would also work.
wierd, because my backup camera in my mirror never worked. took the ceiling bezzle off and saw that the 2 wires werent even plugged in. check for power and not getting power when i go in reverse so idk what to do now
I have never had this issue, but,.. Sounds like a "power" issue.. check your fuses, check that rev lights work.. if all seems fine, then a wire to feed power OR a ground for the CAMERA is not connected/cut/missing.. from the info I read, seems OEM is more than just a power and negative..relays may also be involved...look for the schematic (this should help or at least get you started.. www.silveradosierra.com/mobile-electronics/2012-oem-back-up-camera-wiring-t124249.html
В видео хрень. Можно не лезть никуда и взять сигнал с колодки у зеркала. Синий и белый. Экранирование не нужно. Они без него. От этих клемм проводишь до головного устойства и всё пашет
Хотя «конструктивная» критика всегда приветствуется, вместо того, чтобы быть желчной, если видео такое дерьмо, может быть, вместо этого покажите то, что лучше, или яснее объясните, что следует сделать. Эти видеоролики призваны помочь или, по крайней мере, дать отправную точку для исправления или решения проблемы, которую некоторые могут искать.
Great video but there is a plug by the emergency brake pedal.Bobs automotive mirrors sales a harness that plugs in an plugs into your radio .much easier no cutting soldering just plug an play .
Please send link for that harness
Yes please post a link
Привет, спасибо за видео, я из России и благодаря тебе смог тоже вывести камеру на монитор🤝
Great song!
Good to know I'm going to this idk why chevy thought it was a good idea to do it that way with a little screen on the mirror.
i have a 2014 and will be following your video for my instsll. thanks for the video
Hope it helps
Great video! I'm surprised more people don't do this
Thanx...Decided to post all mods/changes I make because there seems to be so little info out there for Mods...
Couldn't you just tap into the video signal cable located where the stereo cables are that connect to the head unit?
Hi..On my Suburban, the video wiring seemingly went from the rear camera to the rear view mirror along the roof between the headliner and metal, and did not come down to the dash. The only wires I found for the camera that came down were power (activation).
Great video. Exactly what I was looking for. Pardon my ignorance- is it necessary to shield all the rca wire with aluminum tape?
Thank you.. As for the shielding.. I do not know if it is really necessary, but seeing how all was open already, for the few minutes it takes to cover, i did not want to chance NOT putting it. Now if you do not have aluminum tape, I would think wrapping it in aluminum paper and regular tape to hold it, would also work.
wierd, because my backup camera in my mirror never worked. took the ceiling bezzle off and saw that the 2 wires werent even plugged in. check for power and not getting power when i go in reverse so idk what to do now
I have never had this issue, but,.. Sounds like a "power" issue.. check your fuses, check that rev lights work.. if all seems fine, then a wire to feed power OR a ground for the CAMERA is not connected/cut/missing.. from the info I read, seems OEM is more than just a power and negative..relays may also be involved...look for the schematic (this should help or at least get you started..
www.silveradosierra.com/mobile-electronics/2012-oem-back-up-camera-wiring-t124249.html
В видео хрень. Можно не лезть никуда и взять сигнал с колодки у зеркала.
Синий и белый. Экранирование не нужно. Они без него. От этих клемм проводишь до головного устойства и всё пашет
Хотя «конструктивная» критика всегда приветствуется, вместо того, чтобы быть желчной, если видео такое дерьмо, может быть, вместо этого покажите то, что лучше, или яснее объясните, что следует сделать. Эти видеоролики призваны помочь или, по крайней мере, дать отправную точку для исправления или решения проблемы, которую некоторые могут искать.