I love your work! You are very meticulous about explaining everything you do which is good because not everyone does that. I'm just starting my business and you helped with some concerns I had about doing trays and accessories. When I do my vinyl on the trays and there are tiny details (like the whites of the eyes of the Grinch) I layer the vinyl. I would do the white first, than the yellow and black. My husband is the Epoxy King..lol..he says if you have bubbles, use a grill lighter to run over the top of the epoxy after it settles. Keep up with your tutorials because they help me A lot! Thank You!
thank you so much for taking the time and teaching me!! ivve been going crazy trying to get rid of the bubbles andnow i know i gotta stay away from the heat gun! those grinders are something else too lol
I do the edges after the middle has dried and cured with the epoxy spray. But the pour on epoxy must be dry completely before spraying edges. Use Triple Thick or Rustoleum Clear Coat
The bottom of my trays are solid and can’t feel any glitter, but the sides and edges are so rough, how can I fix this? I used a good bit of epoxy but it didn’t help! 😩
Help me understand what you mean by the sides and edges are rough. The molds I use seem to work perfectly every time. Also what brand of Epoxy are you using??
@@WorldHustleNews 😂🤣thank you so much for checking them out! TBH I probably forgot to show it…my videos are FULL of bloopers! Much love & happy crafting!! 🤗
Hello! I got a resin from you, question. Do I mix resin & harder like direction ? Equal parts for 2 minutes than other 1 minute in different clean cup. Or do I mix until resin is clear. Because I got a lot of bubbles and it seems to stiffen quick. Thank you
Make sure your measurements are precise. One to one ratio always. Mine gets a little bit warm and I always get bubbles… But it takes quite some time for it to start stiffening and getting hard. Your mixture might be off. Thank you for checking me out! 🤗
I just found your channel and I appreciate your clear instructions because I have been so lost on how to create with my Epoxy kit.
I love your work! You are very meticulous about explaining everything you do which is good because not everyone does that. I'm just starting my business and you helped with some concerns I had about doing trays and accessories. When I do my vinyl on the trays and there are tiny details (like the whites of the eyes of the Grinch) I layer the vinyl. I would do the white first, than the yellow and black. My husband is the Epoxy King..lol..he says if you have bubbles, use a grill lighter to run over the top of the epoxy after it settles. Keep up with your tutorials because they help me A lot! Thank You!
You are quite welcome! And thank you! I wish you all the best in your business. It sounds like you guys are an amazing team! Happy crafting y’all!❤️🤗
all my supplies came today. so glad to find your vids. great job explaining EVERYTHING!!!! us newbs need it. thank you!!!
I love love love the Grinch
What a great tutorial! Tfs...
Thank you for the time break downs
Love your work and tutorials. Thank you
Thank you 😊
This is amazing well done.. now I need to practice on my cricut
thank you so much for taking the time and teaching me!! ivve been going crazy trying to get rid of the bubbles andnow i know i gotta stay away from the heat gun! those grinders are something else too lol
You’re welcome! Yes....whew the grinders! 🤪
Saw somewhere, where they used a toothpick fir the whole of the grinder to get the bubbles out and to get the resin in the wholes
Great idea!!
LOVE IT !!!!! 👏🏼💕 waaoo... beautiful 🤩
Thank you 😊
I wish you would have shown how to do the eyes. I still hadn't got that down yet. Good job
Man those were tough! Lol 😆
You should cut out your tiny little logo and have that epoxied somewhere on that tray you’re fantastic thank you
Great idea!
I love the grinch. Well done girl. Thanks 😊 Lisa. P.s. do you use a weeding tool when taking off the vinyl it works well.
You are amazing.Ehat is a grinder
I meant what's a grinder
Thanks for sharing! This was really helpful :) Could you please share the link for the molds used?
I must be honest and admit, I can't even remember. Let me locate who Ive used most recently and Ill PIN it up top
Hi new sub!! Do you do anything with the back of your trays?
Did you spread the resin on the edges of the tray or just let it stay in the middle where you poured it.
I do the edges after the middle has dried and cured with the epoxy spray. But the pour on epoxy must be dry completely before spraying edges. Use Triple Thick or Rustoleum Clear Coat
The bottom of my trays are solid and can’t feel any glitter, but the sides and edges are so rough, how can I fix this? I used a good bit of epoxy but it didn’t help! 😩
Help me understand what you mean by the sides and edges are rough. The molds I use seem to work perfectly every time. Also what brand of Epoxy are you using??
How you get yellow eyes from a black piece of vinyl 🤔
That can’t be a serious question…you know darn well black & yellow are 2 diff colors. 🤦🏽♀️
@@TanishiaWynette 🤦🏿♂️😆😆No I didn’t see when you cut the eyes with the yellow vinyl and it could be a print and cut lmao
@@TanishiaWynette But for real I love your tutorial ❤️
@@WorldHustleNews 😂🤣thank you so much for checking them out! TBH I probably forgot to show it…my videos are FULL of bloopers! Much love & happy crafting!! 🤗
@@WorldHustleNews I appreciate you! Sincerely 🥰
I am new to this world of cricket. I have a Cricket Joy
What brand of epoxy did u use?
Alumilite Amazing Clear Cast
@@TanishiaWynette thank you 😊
Did you mirror this immage?
When using vinyl you don’t mirror. Only mirror iron on
Yes ma’am! That’s correct!🤗
Hello! I got a resin from you, question. Do I mix resin & harder like direction ? Equal parts for 2 minutes than other 1 minute in different clean cup. Or do I mix until resin is clear. Because I got a lot of bubbles and it seems to stiffen quick. Thank you
Make sure your measurements are precise. One to one ratio always. Mine gets a little bit warm and I always get bubbles… But it takes quite some time for it to start stiffening and getting hard. Your mixture might be off. Thank you for checking me out! 🤗
Alcohol to get the bubbles out, okay great 😊