I've noticed several comments stating the maker of this video did not dilute the soap solution that was poured into these dispensers. This is a very important step; the dilution ratio is generally 1 part liquid hand soap to 3 parts water. This is necessary for proper foaming of the dispensed soap as well as longevity of the machine. If this is not done, the unit will most likely clog after a period of non-use, and may not be repairable. One of the packages shown had a syringe most likely used for correct measurement of soap solution to water. I also noticed that the soap foam dispensed was thicker than what comes from my machine, and one of the dispensers didn't seem to be ejecting the soap properly (bubbles). This is probably because the soap was not diluted.
Many peeps just don't understand the BIG difference between a FOAMING liquid soap dispenser and a standard liquid soap dispenser. It's VERY simple folks! Always dilute liquid soap or gel with water FIRST before pouring into a foaming dispenser. Depending on the design of the device, and the formulation of the soap you choose, the amount of water will vary considerably. Some folks live in a hard water area and others have soft water which also has an influence on the finished quality of foam. Tip: begin by mixing 1 part liquid soap to 3 parts water. It may be possible to dilute up to 5 parts water to one part soap, so you should experiment. Make sure the soap and water are thoroughly integrated BEFORE pouring into your foaming dispenser ... simple!
I noticed he didn’t dilute the soap to use on those 3 foaming machines. They’re not designed to foam up thick undiluted soap. Those foaming dispensers will clog and break soon. 😂
The second one is the best. You forgot to mention that the second one has 2 modes for soap small amd medium. I think you only showed the small mode not the medium.
All the products featured in the video can be found here:
amzn.to/40m4ghh
I've noticed several comments stating the maker of this video did not dilute the soap solution that was poured into these dispensers. This is a very important step; the dilution ratio is generally 1 part liquid hand soap to 3 parts water. This is necessary for proper foaming of the dispensed soap as well as longevity of the machine. If this is not done, the unit will most likely clog after a period of non-use, and may not be repairable. One of the packages shown had a syringe most likely used for correct measurement of soap solution to water. I also noticed that the soap foam dispensed was thicker than what comes from my machine, and one of the dispensers didn't seem to be ejecting the soap properly (bubbles). This is probably because the soap was not diluted.
Many peeps just don't understand the BIG difference between a FOAMING liquid soap dispenser and a standard liquid soap dispenser. It's VERY simple folks!
Always dilute liquid soap or gel with water FIRST before pouring into a foaming dispenser. Depending on the design of the device, and the formulation of the soap you choose, the amount of water will vary considerably. Some folks live in a hard water area and others have soft water which also has an influence on the finished quality of foam.
Tip: begin by mixing 1 part liquid soap to 3 parts water. It may be possible to dilute up to 5 parts water to one part soap, so you should experiment. Make sure the soap and water are thoroughly integrated BEFORE pouring into your foaming dispenser ... simple!
I noticed he didn’t dilute the soap to use on those 3 foaming machines. They’re not designed to foam up thick undiluted soap. Those foaming dispensers will clog and break soon. 😂
We are an automatic soap dispenser manufacturer from Shenzhen.
The second one is the best. You forgot to mention that the second one has 2 modes for soap small amd medium. I think you only showed the small mode not the medium.
Which laboratory you are from? I bought the first one and it doesn’t work
we are the manufacturer of soap dispenser in Shenzhen China
Can I download it
Gracias
Você misturou o detergente com água?
Price
Check description
I purchased the same machine from amazon but the foam doesn't come out. Can u plz help me
Presio
I bought two and neither of the two work.
And I did use foaming soap. It’s what I always use.