Это видео недоступно.
Сожалеем об этом.
How to repair a broken Roller Blind chain with a joining link
HTML-код
- Опубликовано: 18 авг 2024
- In this video Michael explains how to repair a broken roller blind chain with a joining link.
More information about roller blinds can be found at www.iseekblind...
If you have any questions you can call us on 1300 664 257 or email sales@iseekblinds.com.au
I just broke my blind chain and was going to take it back but now I dont have to. Thank you for the great video and the help. Excellent!
Thanks Michael we broke our chain the other day, this video is so helpful, thank you very much
You are most welcome Ana Bee! Glad our video was of help to you. :-)
@@iseekblinds As we are in lockdown in Melbourne, I've not been able to fix it just yet as we are not allow to venture to far from home and the blind is at another property down by the coast. I will write again once I've fixed it. It looks so easy. I hope I don't stuff it up. The only problem is the chain broke in a few parts but that shouldn't matter I hope.
@@anabee2080 no worries at all. I'm sure once we can all move around freely again (we are also in Melbourne), you'll be able to fix the chain. Please contact us directly at sales@iseekblinds.com.au or on 1300 664 257 if you need help once you get to the property. Take care :-)
thanks..this was really helpful and easy to understand and saved me $120.
Excellent! Thanks Shandra. Have a great day!
Thank you for this! Store where purchased unable to help other than to tell me to bring it in so they could send back to factory. It took me 1 min to fix after watching this. You are the best!!!
Hi Anna, oh thats so good to hear! We're glad we could help. Sounds like it saved you a lot of trouble! Have a great day, Mike.
Excellent demo.
Thanks Shane!
Chain fix for RollerBlind. In case you are here to reattach the chain for a Louvolite Shade System 40 clutch R3025, this is what you do
Remove blind - steps to do this:
- roll up blind (if you can with a little force, but not essential), push chain end in a direction it will move a little, usually up, push toward other end., it should now be detachable from chain end)
Once removed, roll up blind if is not already
Pull out mechanism on chain end from the roller tube - the whole chain enclosure mechanism should slide out - use a flathead screwdriver to ease out if necessary.
Remove the plastic pin from point at the end, prise out with a small Phillips screwdriver in the hole if can't do manually
Replace the chain - if it has a joiner the make sure it is placed close the mechanism on the side where the chain is chain is will drop down.
Reverse process to refit.
Note: the three lugs on the chain end should be faced upright, ensure blind is facing correct direction.
Brilliant. Thanks
You are most welcome! Glad our video was of help to you. :-)
Where do you get the chain joiner?
blindpartsbydave.com.au/collections/roller-blind-parts/products/blind-chain-connectors
Life saving... thanks!
Glad we could help!
Looks so easy when you do it but my joining link won't push onto the chain. Trying with pliers. Still no good. End chain ball keeps breaking off.
Now im winning...Saved alot of cursing lol.Cheers mate
Excellent! Glad we could help. Have a wonderful day!
Great video mate!
Thank you so much!
was this recorded on a smart fridge
Thanks for the Vid mate, saved me some pain for sure.
Thank you for a great video helped me out a great deal will certainly consider your company for blinds in future also will recommend where I can
You're so welcome Steven. Glad we could be of help! We appreciate your support.
Thanks,
The iSeekBlinds team
What about if the chain needs to go around the mechanism more than once to lower the blind?
Hi Davin, you can purchase a new chain from our Spare Parts area on the website. These are a continuous loop so they will be able to go around the chain drive. Cheers iseekblinds
my Chain is cut in the middle. how to fix it?
Super informative video, clear and super helpful. Thanks mate :)
How’d you take the blinds out so easily mine won’t come off the wall
Hi Shuki - the hardware we use in our blinds enables us to easily pop the blind out of the brackets by rotating the wheel on the pin end. Perhaps your blind hardware is different to what we use? Good luck with taking yours down, we hope you get there!
Thank you!
You're welcome :-)
Thank you 🙏🏼
Very very helpful, about to follow your instructions.
Can I ask, where are you based ? Cheers, Victor
Thank you Victor! Glad to be of help.
We are based in Melbourne, Australia. You can visit us online at www.iseekblinds.com.au/
@@iseekblinds thank you , I’ll have a look at your website, cheers
Good info but please draw the blinds in the background so we can see you!
If the chain came out, how do I get it back in?
Hi Vanessa,
You should be able to re-attach the chain to the drive, or simply pop the chain drive back into the tube.
Please call us on 1300 664 257 between 9am & 5pm (AEST) and we can talk you through your particular situation.
Cheers,
Mike
thanks.
Where do I find a chain link?
Hi John, we can help you with a chain link. Please email our team at sales@iseekblinds.com.au, and they'll steer you in the right direction.
Regards, iseekblinds
Thks ..
good❤
where do i find the chain link, pls share the part number if any
Hi Srikant, thanks for your comment.
We can supply you the chain link if you'd like to send us an email at sales@iseekblinds.com.au. The customer service team will be happy to help arrange this for you.
Thanks,
Mike.
Good information but the sound is bad!
Sorry for that - we will be re-shooting our videos soon with much improved audio.
Thanks,
~iSB
Impossible to see what you were doing. You're too far from the camera
Hi Susan, we're sorry you found it difficult to see. Thanks for letting us know - we will look at improving the video in the near future.
Regards,
iseekblinds
@@iseekblinds I appricate the reply. Thank you. Yes please, Looking forward to seeing the updated video
You are able to zoom in!