I mounted my chargers on a piece of plywood using heavy duty zip ties like a belt if you will.. I made a loop with a zip tie right down the center of the charger between the battery slots to hold it in place. I Drilled a hole in the plywood on top and on bottom of charger to pass the zip tie through and used a scrap piece of 1x fastened to the plywood as a cleat for the bottom of each charger that I mounted. This supports the charger very securely. I hang it on a wall in various ways in my shop and it can easily be taken off of the wall to go with me on big jobs and hung up on site for use. I Cut a hand slot out in the plywood at the top so I can easily carry it.
Cool idea but I think to improve on this you could use a french cleat on top and bottom, one the other way up so it is secure but you could slide it off if you want to take it with you
I mounted my chargers on a piece of plywood using heavy duty zip ties like a belt if you will.. I made a loop with a zip tie right down the center of the charger between the battery slots to hold it in place. I Drilled a hole in the plywood on top and on bottom of charger to pass the zip tie through and used a scrap piece of 1x fastened to the plywood as a cleat for the bottom of each charger that I mounted. This supports the charger very securely. I hang it on a wall in various ways in my shop and it can easily be taken off of the wall to go with me on big jobs and hung up on site for use. I Cut a hand slot out in the plywood at the top so I can easily carry it.
Yeah I'll try that
I love this solution. Thanks for sharing 💪
Great idea! I just did this in my workroom. Glad I didn’t have to order expensive mounts
Glad it helped!
Man how do I shut those blinking lights off when no battery is in the charger? Nice diy !
You don't, lol
Unplug it
@@haggen2964 I’m wiring 8 differ t chargers wired to bus bar with on/off switch with only using 1 plug.Unplug it 😆
Use a switched power strip and turn it off when not in use.
This is a good DIY solution! You can also just get yourself a wall mount for this charger on eBay)
Thank you
Cool idea but I think to improve on this you could use a french cleat on top and bottom, one the other way up so it is secure but you could slide it off if you want to take it with you
Great idea!
Where’s your makita speaker lol