The Grohe smart design tutorial on Single - lever basin mixer installation in your bathroom is to follow just few simple steps as shown here - goo.gl/ouonhV
Nice video, it helped me to fix my own without the need for replacing the tap itself, only I replaced the rusty steel rod, Thx for sharing. Only one advice for whoever has his tap not stable in position due to damaged steal rod, is to replace the steel rod with a copper one, so it will not rust that quickly.
The brass thread is so long there are no sockets deep enough for them, it’s annoying. Please consider including two or three lengths of threaded rod considering some taps are hundred’s of dollars.
If you don't want the tap to come loose, don't use that flimsy horse shoe shaped clip that fits underneath the sink for the nut to screw up against, if the tap manufacturer can't come up with something more reliable to hold the tap to the sink don't use their tap.
There are taps that use a different fixing method and I have seen them, but can not recall who makes them, just avoid all taps that use that flimsy little horse shoe shaped fixing clip underneath.
Thank you for showing 2:00 to all of us, you guys are the real deal!
Horse shoe fitting and horse shoe rubber seal , just a tip , try a few drops of super glue and glue them together, this helps before fitting the tap .
Which tool is used to tighten the screw on 2:18 ?
Nice video. Will attempt with another Grohe mixer.
very nice tutorial
Nice video, it helped me to fix my own without the need for replacing the tap itself, only I replaced the rusty steel rod, Thx for sharing.
Only one advice for whoever has his tap not stable in position due to damaged steal rod, is to replace the steel rod with a copper one, so it will not rust that quickly.
The brass thread is so long there are no sockets deep enough for them, it’s annoying. Please consider including two or three lengths of threaded rod considering some taps are hundred’s of dollars.
That was extremely useful thanks !!
Thank you.
2:00 for the part that matters
Yes that's the flimsy horse shoe shaped clip I am commenting on, do not fit it take it back with the tap to were you bought it from.
But what pipe is what i do t want to put a hot pipe onto the cold outlet?.
Very good ☺️
Thank you very helpful,, plumber wanted too charge me $480.00 too replace a sink mixer.
kea leboha
Yeh 500 3rd and 2nd 9
If you don't want the tap to come loose, don't use that flimsy horse shoe shaped clip that fits underneath the sink for the nut to screw up against, if the tap manufacturer can't come up with something more reliable to hold the tap to the sink don't use their tap.
Any brands you'd recommend mate?
There are taps that use a different fixing method and I have seen them, but can not recall who makes them, just avoid all taps that use that flimsy little horse shoe shaped fixing clip underneath.
U must take a useful things only on the video the rest leave it as it us
Gay
Rubbish