Join the Caliber8 Tribe to get a free ebook on 10 simple ways to beautify your home plus more home improvement and diy tips- join.caliber8.com Get the Ultimate Utility Bag use coupon code Tools- www.caliber8.com/product/caliber8-ultimate-utility-bag/
I broke the rear bracket that connects to the hose. I never thought about taping it up like you did. We must be brothers from another mother, the way we like to get every bit of use out of a piece of equipment before we trash it.
After watching several videos your video was the most helpful and you spoke clearly so I could understand,THANKYOU SO MUCHNOm not an A/C TECH but know I know more than I use too.
@@Caliber8Tools I'm looking for a blower fan wheel for GE 10,000 smart portable air conditioner. One that's not $30 plus. Do you know where to find them online? It's 7.5 x 3.375 d shape shaft (1/2" bore). Counter clock wise I believe
Hey ! I have the exact same AC. However, my problem is, the A/C start cooling for about 30 second, and then get back to Fan mode, and after 10 min, restart this loop again. The room has 0 chance to get colder with this, i only get cold air if i stand infront of it during the cooling phase. Do you have any fix for that? My model is LP0910WNRY2. i think some others model have a manual mode. Mine seems to only run on auto/eco mode
It’s short cycling. Usually happens when the filters are dirty filters which will restrict airflow causing overheated coils or frozen coils. Try cleaning them. Keep the vents unobstructed by walls. Also could be low on refrigerant. Don’t forget to see if your thermostat is at the right setting for your room size.
Hi. I have a SereneLife portable ac SLPAC10 model. It keeps shutting off and displaying an E5 error message. I can't locate where to drain any water from but I've tried tilting the unit to see if any water comes out. I've unplugged overnight and it continues displaying the error code E5. What else can I try? Is it worth it to have an ac person come out to fix it?
Ok, the condensation drain line is clogged. Take a wire hanger, stretch it out and stick it in the line. The drain plug should be on the back of the unit at the bottom.
Thank you, good sir! Just what I needed! ....why there are only 323 likes in three months (summer months, mind you all!) is beyond me. Just subscribed! - J
I just bought a brand new unit in Portugal and it's short cycling :( My offgrid space gets up to 38C/100F and yet my unit refuses to behave. It draws about 2,500W and my inverter can deliver 3,000W no problem. It's 14,000 BTU and my space is 40m2 about 430ft2. I have a feeling it's my space gets entirely too hot (severe greenhouse effect) and the unit just can't handle it... I dunno what to do.
If you can shade any windows from the outside that would be a big help already since there is less energy coming in through the windows, maybe plant some trees next to the cabin and get roller shutters.
Are your vents obstructed? Up against a wall? That could restrict airflow and cause short cycling. All other reasons would not apply to a brand new unit. 14,000 BTU’s should be enough for that size room.
Some window units are only designed to cool. Other than that, the filters could be dirty putting a strain on the compressor, the thermostat could be on the wrong setting, etc. Lo means that the room temperature is already low and the ac is working to cool it further. This could put even more strain on the compressor causing it to shut off due to this stress.
What about using a garden hose on the lower half of unit..the coils? Ive seen this done and seemed to work...I ordered a capacitor, if that doesnt work im going to try the hose....
Yes, you can use a hose to clean the coils but you do not want it on the spray setting. The spray setting is too powerful and may bend the fins. Adjust the pressure to a gentle stream.
I have a midea 5k, it was short cycling due to low volatage on the oil rig, I got a 10 gauge extension cord hooked to a reastate voltage regulator to give me 115-125v at all times. It worked great until recently. i cleaned everything out but still it shuts off in the heat of the day when i need it most, all voltages are fine. I think its time for a new one, proabably gonna get an LG model after seeing this video, that ac you had apart looks much better built on the inside.
Hello. I've had my unit for less than a year and begin using it 5 months ago. Over the last couple of weeks, it has been filling up with water just about every day, shutting off, and I have to drain it (bottom plug). Also, the air is nowhere near as cool as it was before this filling issue started. I have never used the "dry" (dehumidifier) function at all, and it is set to "cool," and both filters are clean (top and bottom). What could be causing this to happen, and how can it be fixed? Thank you for your response.
Possibly a clogged drain hose. Take off the drain cap. Check the opening for debris. Use a vacuum to suck out any blockages, or use a wire to clear it.
I just bought a brand new LG 8000 portable. I hooked it up and turned it on and as soon as the compressor kicks on it shuts back off and the dirty fliter light blinks. Its brand new. I transported the AC on its side and have read that you need to let it set for 12 to 24 hours on google. However, nothing in the instructions mentions this. Did I mess up my new AC by starting it to soon after transport?
@@campnoutdoors1621 try a different wall outlet , sometimes the electrical circuit is you plug into is overloaded . Try a GFCI outlet as a test since those are mostly isolated.
Laying on its side may have damaged the compressor as well as other components like the evaporator coils. The refrigerant can also be disturbed to the point of not flowing properly.
Try to see if your remote has a feature where you can set the system to cool based on the remotes temp instead of the temp inside the unit. this will rule out thermostat
@@Steve-xl2mn i took it apart early in the summer to clean the coils because cutting off. It fixed that problem, but then it stopped evaporating a few days after that. I wondered if I knocked something loose, but dismissed that because it didn't happen for a few days after i cleared it.
I have a Delionghi Pinguin. It runs and only blows hot air and it periodically turns off then back on. The room is hot as it is where I do wood crafting and a sewing room. The inside temp is >95 degrees. It worked fine last year but not now. The room is insulated. No warning messages are seen when it shuts off but you see all the symbols come on.
Hello! I have this exact portable AC unit. I am just now running into problems with it after recently cleaning the AC filter a couple days ago. I keep getting the “FL” signal and the bottom drain pan if full a causes the float switch to move up and shuts off the unit. Why is it all of a sudden I am getting so much moisture that I have to drain the unit every four hours? It’s driving me crazy. Any comments you have would be helpful! I also want to note that the humidity levels in the room are higher than normal (we are in the rainy season of Florida) but it’s never affected it before until I recently cleaned the filter.
Dirty filters can cause evaporator coils to freeze up and thaw out leading to excessive water in the pan but you cleaned them. So it’s probably due to the high humidity, which is the cause of the FL signal coming on. More water is being condensed than it is being evaporated. Until the humidity lowers you may have to keep your draining schedule. A clogged drain line can also contribute to a frequently full drain pan.
I'm having the same issue! BRAND NEW UNIT now, nothing is dirty. Every 2 hours it waffles me up to drain. I have FOUR units on my house, and the only one that keeps doing it is the one in my bedroom. HELP!
I have a question, my ac unit , exact model as the one in the video , it’s plugged in but not turning on, the led screen doesn’t turn on and it won’t start, but the plug to go into the wall works, what could be wrong with it, before it stopped working the screen would glitch and it would be stuck on a number , I empty it each morning as I only use it for the night time. I wanna save money by saving my Ac please help if you can
Sounds like an electrical issue. Could be a fuse or circuit board issue. Is your cord in good condition? It can also be a bad capacitor. In any case take it or a professional to check it out. Let us know what it was. Thanks.
@@Caliber8Tools I'm having the same problem, the unit is clean and well maintained. I pulled the 15 amp fuse from the board and checked it, visually it appears to be functional... is there more than one? Thanks in advance.
Check your thermostat settings. Are your filters clean? If not they can block the airflow needed to keep the coils functioning properly and dirty filters can also put a strain on the compressor.
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
Join the Caliber8 Tribe to get a free ebook on 10 simple ways to beautify your home plus more home improvement and diy tips- join.caliber8.com
Get the Ultimate Utility Bag use coupon code Tools- www.caliber8.com/product/caliber8-ultimate-utility-bag/
What a nice video. Thank you for your time to Made it👍🏼
Glad it helped. Thank you.
Your the man brother!
Thank you. Glad it helped.
Excellent info! Thank you so much!
Glad it helped.
I broke the rear bracket that connects to the hose. I never thought about taping it up like you did. We must be brothers from another mother, the way we like to get every bit of use out of a piece of equipment before we trash it.
After watching several videos your video was the most helpful and you spoke clearly so I could understand,THANKYOU SO MUCHNOm not an A/C TECH but know I know more than I use too.
You’re so welcome. Glad it helped.
Thank you a very detailed but simple explanation!! 👍
You’re welcome. Glad it helped.
Honestly I just Ricky Ricardo hit my air conditioner and it started working
That works all the time?, Impressive.
@@Caliber8Tools I'm looking for a blower fan wheel for GE 10,000 smart portable air conditioner. One that's not $30 plus. Do you know where to find them online? It's 7.5 x 3.375 d shape shaft (1/2" bore). Counter clock wise I believe
Hey ! I have the exact same AC. However, my problem is, the A/C start cooling for about 30 second, and then get back to Fan mode, and after 10 min, restart this loop again. The room has 0 chance to get colder with this, i only get cold air if i stand infront of it during the cooling phase. Do you have any fix for that? My model is LP0910WNRY2. i think some others model have a manual mode. Mine seems to only run on auto/eco mode
It’s short cycling. Usually happens when the filters are dirty filters which will restrict airflow causing overheated coils or frozen coils. Try cleaning them. Keep the vents unobstructed by walls. Also could be low on refrigerant. Don’t forget to see if your thermostat is at the right setting for your room size.
My filters were dirty. I’m wondering if the dirty filter messed up something else. Like ruined the compressor? How do I know?
Dirty filters can cause the compressor to work harder and even cause it to shut down.
@@Caliber8Tools can you replace a broken compressor?
Yes, they can be replaced.
Hi. I have a SereneLife portable ac SLPAC10 model. It keeps shutting off and displaying an E5 error message. I can't locate where to drain any water from but I've tried tilting the unit to see if any water comes out. I've unplugged overnight and it continues displaying the error code E5. What else can I try? Is it worth it to have an ac person come out to fix it?
Ok, the condensation drain line is clogged. Take a wire hanger, stretch it out and stick it in the line. The drain plug should be on the back of the unit at the bottom.
Thank you, good sir! Just what I needed! ....why there are only 323 likes in three months (summer months, mind you all!) is beyond me. Just subscribed! - J
Glad it helped. Thank you.
Can the room be too hot initially and overheating the compressor?
Can the cord be restricting current to the compressor cycle?
Yes and yes. The rating of the cord can affect the current. Check the machine decal for amp consumption. Replace a damaged cord obviously.
I just bought a brand new unit in Portugal and it's short cycling :( My offgrid space gets up to 38C/100F and yet my unit refuses to behave. It draws about 2,500W and my inverter can deliver 3,000W no problem. It's 14,000 BTU and my space is 40m2 about 430ft2. I have a feeling it's my space gets entirely too hot (severe greenhouse effect) and the unit just can't handle it... I dunno what to do.
If you can shade any windows from the outside that would be a big help already since there is less energy coming in through the windows, maybe plant some trees next to the cabin and get roller shutters.
Are your vents obstructed? Up against a wall? That could restrict airflow and cause short cycling. All other reasons would not apply to a brand new unit. 14,000 BTU’s should be enough for that size room.
Last night my ac started number jumping.... it was crazy had to shut it off
May be a faulty sensor or thermostat.
I have a window unit, when the heat on. The unit shut down,then it flash Lo. Can you help me.
Some window units are only designed to cool. Other than that, the filters could be dirty putting a strain on the compressor, the thermostat could be on the wrong setting, etc. Lo means that the room temperature is already low and the ac is working to cool it further. This could put even more strain on the compressor causing it to shut off due to this stress.
What about using a garden hose on the lower half of unit..the coils?
Ive seen this done and seemed to work...I ordered a capacitor, if that doesnt work im going to try the hose....
Yes, you can use a hose to clean the coils but you do not want it on the spray setting. The spray setting is too powerful and may bend the fins. Adjust the pressure to a gentle stream.
I have a midea 5k, it was short cycling due to low volatage on the oil rig, I got a 10 gauge extension cord hooked to a reastate voltage regulator to give me 115-125v at all times. It worked great until recently. i cleaned everything out but still it shuts off in the heat of the day when i need it most, all voltages are fine. I think its time for a new one, proabably gonna get an LG model after seeing this video, that ac you had apart looks much better built on the inside.
Interesting work around with the larger gauge cord.
Hello. I've had my unit for less than a year and begin using it 5 months ago. Over the last couple of weeks, it has been filling up with water just about every day, shutting off, and I have to drain it (bottom plug). Also, the air is nowhere near as cool as it was before this filling issue started. I have never used the "dry" (dehumidifier) function at all, and it is set to "cool," and both filters are clean (top and bottom).
What could be causing this to happen, and how can it be fixed? Thank you for your response.
Possibly a clogged drain hose. Take off the drain cap. Check the opening for debris. Use a vacuum to suck out any blockages, or use a wire to clear it.
I just bought a brand new LG 8000 portable. I hooked it up and turned it on and as soon as the compressor kicks on it shuts back off and the dirty fliter light blinks. Its brand new. I transported the AC on its side and have read that you need to let it set for 12 to 24 hours on google. However, nothing in the instructions mentions this. Did I mess up my new AC by starting it to soon after transport?
@@campnoutdoors1621 try a different wall outlet , sometimes the electrical circuit is you plug into is overloaded . Try a GFCI outlet as a test since those are mostly isolated.
Laying on its side may have damaged the compressor as well as other components like the evaporator coils. The refrigerant can also be disturbed to the point of not flowing properly.
my problem is not filters at all. filters and coils all cleaned yet still only blows mildly cool air.
Could be a thermostat issue.
@@Caliber8Tools that gon cost an arm and a leg to replace haha
freon maybe
Try to see if your remote has a feature where you can set the system to cool based on the remotes temp instead of the temp inside the unit. this will rule out thermostat
@@makodaniel4885 nope just has cool,fan,dehumid modes and low and high fan setting.
Mine is no longer self evaporating the condensed water. I have a drip pan collecting the water. Any ideas of the cause?
How humid is your area. Too much moisture can cause this.
@@Caliber8Tools it's very humid. But it worked fine for 6 years.
@@micclay Check the slinger motor in bottom drip tray & check that line from upper tray (to lower) isn't clogged.
@@Steve-xl2mn will do
Thanks.
@@Steve-xl2mn i took it apart early in the summer to clean the coils because cutting off. It fixed that problem, but then it stopped evaporating a few days after that. I wondered if I knocked something loose, but dismissed that because it didn't happen for a few days after i cleared it.
I have a Delionghi Pinguin. It runs and only blows hot air and it periodically turns off then back on. The room is hot as it is where I do wood crafting and a sewing room. The inside temp is >95 degrees. It worked fine last year but not now. The room is insulated. No warning messages are seen when it shuts off but you see all the symbols come on.
Maintenance time.
Hello! I have this exact portable AC unit. I am just now running into problems with it after recently cleaning the AC filter a couple days ago. I keep getting the “FL” signal and the bottom drain pan if full a causes the float switch to move up and shuts off the unit. Why is it all of a sudden I am getting so much moisture that I have to drain the unit every four hours? It’s driving me crazy. Any comments you have would be helpful! I also want to note that the humidity levels in the room are higher than normal (we are in the rainy season of Florida) but it’s never affected it before until I recently cleaned the filter.
Dirty filters can cause evaporator coils to freeze up and thaw out leading to excessive water in the pan but you cleaned them. So it’s probably due to the high humidity, which is the cause of the FL signal coming on. More water is being condensed than it is being evaporated. Until the humidity lowers you may have to keep your draining schedule. A clogged drain line can also contribute to a frequently full drain pan.
I'm having the same issue! BRAND NEW UNIT now, nothing is dirty. Every 2 hours it waffles me up to drain. I have FOUR units on my house, and the only one that keeps doing it is the one in my bedroom. HELP!
I have a question, my ac unit , exact model as the one in the video , it’s plugged in but not turning on, the led screen doesn’t turn on and it won’t start, but the plug to go into the wall works, what could be wrong with it, before it stopped working the screen would glitch and it would be stuck on a number , I empty it each morning as I only use it for the night time. I wanna save money by saving my Ac please help if you can
Sounds like an electrical issue. Could be a fuse or circuit board issue. Is your cord in good condition? It can also be a bad capacitor. In any case take it or a professional to check it out. Let us know what it was. Thanks.
@@Caliber8Tools I'm having the same problem, the unit is clean and well maintained. I pulled the 15 amp fuse from the board and checked it, visually it appears to be functional... is there more than one? Thanks in advance.
I was about to watch this then saw what I was being presented with
SHEEEEEEEEEEEEIIIIIH FUH RIL FUH RIL, DOE! OWN GAH! NO CAH!
Interesting phrasing, check it out. Might learn something.
The full light
My air conditioner turns on and a couple seconds later.Shut off and the pill light comes on.But there's no water.I opened the drain ideas
Check your thermostat settings.
Are your filters clean?
Check your thermostat settings. Are your filters clean? If not they can block the airflow needed to keep the coils functioning properly and dirty filters can also put a strain on the compressor.
I was disappointed because my portable unit is AC AND heater, and I needed info on the heater. This video didn't provide any help on that.
Appreciate the feedback. What is your specific question?
So basically your screwed if there’s one issue it could be the other
lol. Yes. It could get complicated but not always.